4. Features
Activity LED
RPM Dial
USB Ports
On/Off Switch
5. Usage
USB Power Cable
USB Device
1) To power the unit, connect the Nc1500 and Notebook Computer using the included
USB Power Cable.
2) Turn the Notebook Cooler’s On/Off Switch “On”.
3) Adjust the RPM Dial to the preferred noise and performance setting.
※ One (1) USB device can be connected to the NC-1500’s USB port.
Caution
When using the NC1500 USB port for power and data transfer, use devices that draw
no more than 1.9W.
Cooling performance improves proportionally with the gap between the notebook and
the cooler.
2
3
|