Quick Installation Guide
TK-210K
1. Before You Start
Package Contents
TK-210
2 Sets of KVM Cables
2 Sets of USB Cables
2 Sets of Audio Cables
Stand
System Requirements
VGA or SVGA Compatible Monitor
Microphone and Speaker (optional)
Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS
Application
PC 2
Cables
Speakers
Microphone
PC 1
Cables
2-Port USB and PS/2
KVM Switch with Audio
(TK-210K)
LCD Monitor
Printer
Keyboard
Scanner
Mouse
1
English
2. How to Install
1. Turn off both computers and their
peripherals, and disconnect all
power cords.
2. Connect the USB device (optional),
microphone (optional) and speaker
(optional) into the KVM switch.
3. Connect the shared PS/2
keyboard, monitor, and PS/2
mouse into the KVM Switch's
console port .
4. Use the provided KVM and audio
cables to connect your PC to the
KVM Switch.
5. Turn ON the first computer and
wait until startup completes.
PC 1
2
English
6. Press the face panel button on the
KVM Switch to select the second
computer.
7. Turn ON the second computer and
wait until startup completes.
PC 2
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
Thank you for choosing TRENDnet
3
English
3. Operation
Note: For PC switching, you can use the face-panel buttons of the KVM Switch,
or a hot-key command sequence via keyboard.
Face-Panel Buttons
Press the corresponding face-panel
button to select your PC or USB
devices.
Hot-Key Command Sequence
A keyboard hot key command consists of three keystrokes:
Hot Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
If you do not press a key within 2 seconds, the switch will exit hot-key mode.
4
English
Note:
1. Hot key command works on top row numbers keys only.
2. A PS/2 Keyboard is required for proper hot key function. If you use a USB
keyboard, hotkey feature is disabled.
3. When the binding of PC, USB Hub & Audio/Mic port switching is enabled by
the hotkey sequence, any PC, USB Hub and Audio/Mic switching are bound
together.
4. For non-PnP OS (Linux, Windows NT4.0), please use the following
commands to reset the mouse setting.
ScrLk
ScrLk
ScrLk
M
M
M
1
2
3
ScrLk
ScrLk
ScrLk
2-key mouse setting:
+
+
+
+
+
+
+
+
+
3-key wheel mouse setting:
5-key wheel mouse setting:
5
English
Quick Reference Sheet for TK-210
Front-Panel
Buttons
Hot-Keys
Description
Command
Select the active PC channel x
(selects both PC & Hub port,
if “binding” is enabled)
Press the PC button
to toggle the PC
channel
ScrLk
+
ScrLk
+
X
Select PC
(x is a top-row number key)
x = 1 ~ 2 for PC channel number
Select the active USB hub port
(select both PC & Hub port, if
“binding” is enabled)
Press the USB button
toggle the USB Hub
port
ScrLk
ScrLk
FX
+
(Fx is a function key) Fx = F1 ~ F2
+
Select Hub Port
Enable the binding of PC &
Hub port switching. (Once
this feature is enabled, any
PC and/or Hub port switching
is bound together)
Bind PC & Hub Port
Switching
ScrLk
ScrLk
- - -
Z
X
+
+
Disable the binding of PC &
Hub port switching.
(Factory default)
UnBind PC & Hub
Port Switching
ScrLk
ScrLk
ScrLk
ScrLk
- - -
- - -
+
+
+
+
Select the next lower
connected channel. (select
both PC and Hub port, if
“binding” is enabled)
Next lower channel
(Arrow up)
Select the next higher
connected channel. (select
both PC and USB Hub port,
if “binding” is enabled)
ScrLk
ScrLk
+
+
Next higher channel
Beep Sound On/Off
- - -
- - -
(Arrow down)
Toggle on/off the beep sound
for Hot-Keys and port switching
confirmation
ScrLk
ScrLk
ScrLk
ScrLk
B
+
+
+
+
Autoscan through each
connected channel to browse
each channel (delay = 10 \
seconds).
S
- - -
Autoscan
Press any key on keyboard
Stop Autoscan
Press any button.
Terminate Autoscan.
6
English
Troubleshooting
Q1: Where is the power supply? I did not find one in the box.
A1: The TK-210K does not require a power supply. It draws power from your computer's
USB connection. As long as your KVM switch is connected to the USB or PS/2 port, it will
receive the necessary power to function.
Q2: I have the KVM switch connected properly, but my keyboard and mouse don't work.
A2: Please make sure your USB port is working properly by testing it with your other USB
devices. Once you confirm that the USB port is functional, please reboot your computers,
and try to use the KVM switch again.
Q3: I have the KVM switch connected properly, but my microphone and speakers don't
work.
A3: First, make sure your sound card is properly installed on your computers. Second, make
sure your speakers and microphone work properly when connected directly to your
computer. Third, make sure your speakers and microphone are connected in correct jack on
the KVM switch. Make sure the audio cables are connected to the correct jack on your
computer.
Q4: Can I connect and disconnect the USB cables while the computers are turned on?
A4: Yes, you can connect or disconnect the USB cables while the computers are turned on
because the USB interface is Plug-and-Play and Hot-Pluggable.
Q5: Will the KVM switch remember the keyboard settings between computers?
A5: Yes, the KVM switch will remember the keyboard settings when switching between your
computers. (i.e.: Cap lock, Num key, etc.)
Q6: How do I switch from one computer to another with the KVM switch?
A6: PC User: Push Buttons, Hot-Key Commands
Mac User: Push Buttons
Linux User: Universal Hot-Key Commands
If you still encounter problems or have any questions regarding the TK-210K, please contact
TRENDnet's Technical Support Department.
7
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TK-210 - 2-Year Warranty
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.
8
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Power Supply, and Cables carry a 1-Year
Warranty
9
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2007. All Rights Reserved. TRENDnet.
|