T61LX
Para obtener una copia en español de esta Guía del
Usuario, visite nuestra página Web en
pending U.S. Trademarks owned by Microsoft
Corporation of Redmond, Washington, U.S.A.
Unidos, también puede llamar al 1-800-374-2776.
Trademarks referred to herein are trademarks of their
respective companies.
T9 Text Input is licensed under onee or more of the
Register your new phone, purchase Sony Ericsson
original accessories and see the latest in products by
s
following: U.S. Pat. Nos. 5,818,437, 5,953,541,
5,187,480, 5,945,928, andU6,011,554; Canadian Pat.
a
l
05/02 PBM
No. 1,331,057; Uinited Kingdom Pat. No. 2238414B;
e
Hong Kong Standard Pat. No. HK0940329; Republic of
c
This manual is published by Sony Ericsson Inc., without
any warranty. Improvements and changes to this manual
necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or
r
Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463
(9m6927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
m
equipment, may be made by Ericsson Inc., at any time
and without notice. Such changes will, however, be o
C
The BLUETOOTH trademarks are owned by Bluetooth
SIG, Inc., U.S.A.
incorporated into new editions of this manual.
r
Some menus/features are operator dependent.
© 2002, Sony Ericsson Inc. All rights reserved.
Publication Number: AE/LZT 123 7193/2 R1
Printed in USA
“Ericsson”, “Ericsson
” and “ERICSSON ORIGINAL
fo
L
ACCESSORIES” are each registered U.S. Trademarks
t
o
owned by Telefonaktiebolaget L M Ericsson of Sweden.
N
“Microsoft”, “Windows” and the design plus words
“Microsoft Windows” are each either registered and/or
i
Table of Contents
Guidelines for Safe and Efficient Use........1
Limited Warranty .......................................6
Understanding this User’s Guide...............8
Getting To Know Your Phone....................9
Standby Screen Icons................................10
Getting Started ..........................................14
Using Menus...............................................20
Phonebook Menu.......................................21
Messages Menu..........................................24
Call Info Menu...........................................25
Touch Tone Service...................................51
Text Messaging ..........................................52
Using Voice Commands ............................58
Inputting Text............................................63
e
Using the Calendsar....................................66
Troubleshooting.........................................70
U
Index ..a.........................................................72
c
r
l
i
e
m
Ongoing Call Menu...................................27
m
Settings Menu ............................................28
o
Extras Menu...............................................38
C
r
My Shortcuts Menu...................................43
Using the Phonebook...f...o...........................44
Calling Contactso........................................46
t
Editing the Phonebook..............................47
N
Synchronizing Your Phone and PC.........49
Groups........................................................50
ii
Guidelines for Safe and Efficient Use
Please read this information before using your
mobile phone.
•
Do not attempt to disassemble your product. Only
Sony Ericsson authorized personnel should perform
service.
Recommendations
•
If your mobile phone is equipped with infrared, never
•
•
•
•
Always treat your product with care and keep it in a
clean and dust-free place.
direct the infrared ray at anyone’s eye and make sure
e
s
that it does not disturb any other infrared units.
U
Do not expose your product to liquid or moisture or
humidity.
l
Antenna
a
i
Only use an acntenna that has been specifically designed
Do not expose your product to extreme high or low
temperatures.
by Sony Ericsson for your mobile phone. Use of
r
unauthorized or modified antennas could damage your
e
Do not expose your product to open flames or lit
tobacco products.
mobile phone and may violate regulations, causing loss
m
of performance and SAR levels above the recommended
m
•
•
•
Do not drop, throw, or try to bend your product.
limits (see below).
o
Do not paint your product.
C
Efficient Use
r
Do not use your product when in, or around aircraft, or
•
•
Hold your mobile phone as you would any other
phone. Do not cover the top of the phone when in use,
as this affects call quality and may cause the phone to
operate at a higher power level than needed, thus
shortening talk and standby times.
areas posted “turn off two-way radio”.
fo
Do not use your product in oan area where a potentially
Do not place your product or install wireless
equipment in the area above your car’s air bag.
t
•
•
explosive atmosphere exists.
N
Do not use the mobile phone when the front and/or
back cover is removed from the unit.
Guidelines for Safe and Efficient Use
1
Radio Frequency (RF) Exposure and SAR
Your mobile phone is a low-power radio transmitter and
receiver. When it is turned on, it emits low levels of radio
frequency energy (also known as radio waves or radio
frequency fields).
Therefore, the closer you are to a base station, the more
likely it is that the actual SAR level will decrease.
Variations in SAR below the radio frequency exposure
guidelines do not mean that there are variations in safety.
While there may be differences in SAR levels among
mobile phones, all Sony Ericsson mobile phone models
Governments around the world have adopted
comprehensive international safety guidelines, developed are designed to meet radio frequency exposure
e
Accessories can signiUficantly affect a mobile phone’s
s
by scientific organizations, e.g. ICNIRP (International
Commission on Non-Ionizing Radiation Protection) and
IEEE (The Institute of Electrical and Electronics
guidelines.
l
compliance wiath the radio frequency exposure guidelines.
i
Engineers Inc.), through periodic and thorough
For example, the Federal Communication Commission in
c
evaluation of scientific studies. These guidelines establish
permitted levels of radio wave exposure for the general
population. The levels include a safety margin designed
r
the U.S. requires that some manufacturers’ accessories
shall be tested, and Sony Ericsson has done so with
respect to its products. To avoid causing loss of
e
m
to assure the safety of all persons, regardless of age amnd
C
performance or radio frequency exposure levels above
the permissible limits it is recommended that you only
use Sony Ericsson or Ericsson original accessories
intended for use with the mobile phone. If you wear the
mobile phone on your body while it is transmitting, and
you do not use a Sony Ericsson or Ericsson original body
worn accessory, please ensure that the mobile phone is
positioned a minimum of 1.5 cm from your body and that
health, and to account for any variations in
measurements.
o
r
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency energy
fo
SAR value is determined oat the highest certified power
absorbed by the body when using a mobile phone. The
t
level in laboratory coNnditions, but the actual SAR level of
the mobile phone while operating can be well below this you are not using an accessory that contains any metal.
value. This is because the mobile phone is designed to
use the minimum power required to reach the network.
2
Guidelines for Safe and Efficient Use
A separate leaflet with SAR information for this mobile
phone model is included with the material that comes
with this mobile phone. This information can also be
found, together with more information on radio frequency
•
•
Should use the ear opposite the pacemaker to minimize
the potential for interference.
If you have any reason to suspect that interference is
taking place, turn your phone OFF immediately.
Hearing Aids
Electronic Devices
Some digital wireless phones may interfere with some
e
want to consult your serviUce provider or call your local
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
be shielded against the RF signals from your mobile
phone, therefore:
hearing aids. In the event of susch interference, you may
l
Sony Ericsson Cusatomer Care Center to discuss
i
alternatives. c
r
Pacemakers
Other Medical Devices
e
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6”) inches
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
m
m
(15 cm) be maintained between a handheld wireless o
phone and a pacemaker to avoid potential interference
C
with the pacemaker. These recommendations are
consistent with the independent research byrand
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
recommendations of Wireless Technology Research.
fo
t
Persons with pacemakers:
o
Should ALWAYS keepNthe phone more than six inches
•
from their pacemaker when the phone is turned ON;
Turn your phone OFF in any facility where posted notices
so require.
•
Should not carry the phone in a breast pocket;
Guidelines for Safe and Efficient Use
3
Driving
Disposing of the Product
Please check if local laws and regulations restrict the use Your mobile phone should not be placed in municipal
of mobile phones while driving or require drivers to use
handsfree solutions. We recommend that you use
Ericsson or Sony Ericsson handsfree solutions intended
for use with your product. Please note that because of
possible interference to electronic equipment, some
vehicle manufacturers forbid the use of mobile phones in sources as marked on the product. Make sure the cord is
their vehicles unless a handsfree kit with an external
antenna supports the installation.
waste. Please check local regulations for disposal of
electronic products.
Power Supply
Connect the AC power adapter only to designated power
e
s
positioned so that it will not be subjected to damage or
U
stress. To reduce risk of electric shock, unplug the unit
l
a
from any power source before attempting to clean it. The
i
areeas. Never alter the cord or plug. If the plug will not fit
Always give full attention to driving and pull off the road
and park before making or answering a call if driving
conditions so require.
AC power adapter must not be used outdoors or in damp
c
r
into the outlet, have a proper outlet installed by a
m
qualified electrician.
Children
m
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR
MOBILE PHONE OR ITS ACCESSORIES. THEY
COULD HURT THEMSELVES OR OTHERS, OR
COULD ACCIDENTALLY DAMAGE THE MOBILE
o
Emergency Calls
C
Mobile phones operate using radio signals, which cannot
guarantee connection under all conditions. Therefore you
should never rely solely upon any mobile phone for
essential communications (e.g. medical emergencies).
r
fo
PHONE OR ACCESSORY. YOUR MOBILE PHONE
OR ITS ACCESSORY MAYtCONTAIN SMALL
o
PARTS THAT COULD BE DETACHED AND CREATE Emergency calls may not be possible on all cellular
N
A CHOKING HAZARD.
networks or when certain network services and/or mobile
phone features are in use. Check with your local service
provider.
4
Guidelines for Safe and Efficient Use
Battery Use and Care
•
•
Do not disassemble or modify the battery.
Charge the battery for 12 hours before you use your
mobile phone for the first time. The battery can only be
charged in temperatures between +5°C (+41°F) and
+45°C (+113°F).
Do not let the metal contacts on the battery touch
another metal object. This could short-circuit and
damage the battery.
Do not allow the battery to be put into the mouth.
Battery electrolytes may be toxic if swallowed.
•
A new battery or one that has not been used for a long
time could have reduced capacity the first few times it
is used.
e
Please check local regulatUions for disposal of batteries or
Disposing of the Battery
The battery should never be plsaced in municipal waste.
The talk and standby times depend on the actual
transmission conditions when using the mobile phone.
If the mobile phone is used near a base station, less power
is required and talk and standby times are prolonged.
l
call your local Sonay Ericsson Customer Care Center for
information.
i
c
r
Use only Ericsson or Sony Ericsson branded original
batteries and chargers intended for use with your mobile
phone. Other chargers may not charge sufficiently or may
produce excessive heat. Using other batteries and
FCC Statement
e
This device complies with Part 15 of the FCC rules.
m
(1) This device may not cause harmful interference, and
Operation is subject to the following two conditions:
m
chargers could be dangerous.
o
•
Do not expose the battery to extreme temperatures,
never above +60°C (+140°F). For maximum battery
capacity, use the battery in room temperarture.
C
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
fo
•
•
•
•
Warning! May explode if disposed of in fire.
Do not expose the battery to liquid.
Keep out of children’s reach.
Turn off your mobile phone before removing
the battery.
t
o
For Canadian Customers
“IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
N
•
Use the battery for the intended purpose only.
Guidelines for Safe and Efficient Use
5
Limited Warranty
Sony Ericsson Mobile Communications (USA) Inc.
either repair or replace the Product in accordance with the
(Sony Ericsson), provides this Limited Warranty for your terms and conditions stipulated herein.
mobile phone and original accessory delivered with your
Sony Ericsson and/or its service partners reserve the right
to charge a handling fee if a returned Product is found not
mobile phone (hereinafter referred to as “Product”).
Should your Product need warranty service, please return to be under warranty according to the conditions below.
e
s
it to the dealer from whom it was purchased, or contact
your local Sony Ericsson Customer Care Center (national Conditions
further information.
U
l
1
The warranty is valid only if the original proof of
a
i
purchcase issued to the original purchaser by the
dealer, specifying the date of purchase and serial
r
e
Our Warranty
Subject to the conditions of this Limited Warranty, Sony
number*, is presented with the Product to be repaired
or replaced. Sony Ericsson reserves the right to refuse
warranty service if this information has been removed
or changed after the original purchase of the Product
from the dealer.
If Sony Ericsson repairs or replaces the Product, the
repaired or replaced Product shall be warranted for the
remaining time of the original warranty period or for
ninety (90) days from the date of repair, whichever is
longer. Repair or replacement may involve the use of
functionally equivalent reconditioned units. Replaced
parts or components will become the property of Sony
Ericsson.
m
Ericsson warrants this Product to be free from defects in
m
design, material, and workmanship at the time of its
o
original purchase by a consumer, and for a subsequent
C
period of one (1) year.
2
r
If, during the warranty periodt, this Product fails to
fo
What We Will Do
o
operate under normal use and service, due to defects in
N
design, materials, or workmanship, Sony Ericsson
authorized distributors or service partners, in the country
where you purchased the Product, will, at their option,
6
Limited Warranty
3
This warranty does not cover any failure of the
Product due to normal wear and tear, or due to misuse,
including but not limited to use in other than the
normal and customary manner, in accordance with the
Sony Ericsson instructions for use and maintenance of
the Product. Nor does this warranty cover any failure
of the Product due to accident, modification or
adjustment, acts of God, or damage resulting from
liquid.
Since the cellular system on which the Product is to
operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services, or
range of that system.
8
THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THIS PRINTED
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL SONY ERICSSON OR ITS LICENSORS
e
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
s
DAMAGES OF ANY NATURE WHATSOEVER,
U
INCLUDING BUT NOT LIMITED TO LOST PROFITS OR
COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
4
l
a
i
Some counrtries/states do not allow the exclusion or
m
c
e
limitation of incidental or consequential damages, or
limitation of the duration of implied warranties, so the
5
6
This warranty does not cover Product failures caused
by installations, modifications, or repair or opening of
preceding limitations or exclusions may not apply to you.
m
o
the Product performed by a non-Sony Ericsson
The warranty provided does not affect the consumer’s
statutory rights under applicable legislation in force, nor
the consumer’s rights against the dealer arising from their
sales/ purchase contract.
C
authorized person.
r
The warranty does not cover Product failures which
have been caused by use of accessories or other
fo
Ericsson branded original accessories intended for use
t
peripheral devices which aore not Ericsson or Sony
* In some countries/regions additional information is
requested. If so, this is clearly shown on the valid proof
of purchase.
N
with the Product.
7
Tampering with any of the seals on the Product will
void the warranty.
Limited Warranty
7
Understanding this User’s Guide
•
A Menu Diagram is located on the inside front cover of
this User’s Guide. This is a quick overview of the
menus in your Sony Ericsson mobile phone.
•
Your Quick Reference Card gives you information
about your Sony Ericsson mobile phone that you can
take with you.
e
s
U
•
•
Text that is seen in the phone’s display is shown in the
following typeface: Add To Phonebook.
l
a
i
Softkey names are shown in the following typeface:
Softkey.
c
r
e
•
•
Key names are shown in the following typeface: C.
m
When this guide instructs you to press a key, press and
m
When this guide instructs you to press anCd hold a key,
release the key.
o
•
r
press and hold the key for one ftootwo seconds.
t
o
N
8
Understanding this User’s Guide
Getting To Know Your Phone
Phone Views
The following diagrams illustrate the front, back, and
bottom views of your phone.
11 External antenna connector
12 Headset jack
13 Back cover latch
11
13
1
2
3
4
5
Earpiece
Side volume keys
Display
Left softkey
Joystick
12
e
s
1
U
l
a
i
c
2
3
(4-way navigation
with center select
key)
r
e
m
4
5
6
7
8
9
Options key (
Keypad
Power On/Off key
Clear key
)
10
m
9
6
o
7
C
r
14 Accessory Connector
(Handsfree, Charger, FM
radio, MP3, Chatboard, etc.)
15 Charging connector
10 Right softkey
8
fo
t
o
14
15
N
Getting To Know Your Phone
9
Standby Screen Icons
Every time you power on your phone, you will see the
standby screen. You will also see the standby screen
when you exit the menu system. This lists all of the icons
that could appear on your standby screen.
lock your keypad. To unlock your keypad press C then
Yes.
Active profile indicates the currently-selected profile.
The available profiles are Normal (no icon), Meeting
9
(
), Car (
), Outdoors, (
) Portable ( ),
e
10 Call screening ( U) allows you to reject certain
incomingicalls.
a
1
2
3
Alarm icon ( ) is displayed if the alarm is set.
Current Time is displayed.
s
Home ( ), Work ( ), and TTY (TTY).
Signal strength (
) shows the relative signal
l
strength from the wireless system. More bars indicate
a stronger signal (maximum of five bars).
Analog/Digital channel indicator shows whether the
11 Magic Word ( ) indicator indicates that the Magic
c
Worrd feature is enabled. See “Magic Word” on
4
e
phone is operating in analog ( ) or digital ( ) mode.mpage 61.
5
6
7
Battery (
) shows the relative strength of yourm
12 Missed Call list ( ) icon shows the number of
battery. A full icon indicates a fully-charged obattery.
unanswered calls you have received. The icon appears
when you have missed calls.
Network tag indicates that the phone isCin standby
mode and is ready for use.
13 Message icon ( ) indicates that you have received
an email, voicemail, or text message. The number
beside the icon indicates the number of messages you
have waiting.
14 Voice Memo icon ( ) indicates that you have at
least one Voice Memo recorded in memory.
15 TTY indicates that your phone is ready to make and
receive TTY calls.
r
Ringer off/Phone silent indicates that your phone
fo
will not make ring sounds t(
) or that your phone will
not make any sounds(o
). Press the
key to enter
the Options menu to toggle these options on and off.
N
8
Keylock (
) indicates that pressing the keys has no
effect. The keypad is locked to prevent inadvertent
key presses. Press , Lock Keypad then Select to
10
Standby Screen Icons
Options Key
For example, press the left softkey to select Call List or
The key allows you to quickly access options for some press the right softkey to select the Menu from the
functions (options vary based on the function you are
using). For instance, when you are reading a new text
standby screen.
message, you can press the
forward, or reply.
for choices such as delete, Keypad
Use your phone’s keys for the following functions:
e
Make andUanswer calls.
Use...
To...
Key Functions
s
•
•
•
Softkeys
l
a
Sielect a menu, submenu, or setting.
Your phone is equipped with softkeys. The softkey text
labels are displayed on the bottom of your display. To use
the softkey functions, press the left or right key that is
under the text label on the screen.
c
Access the Call List from standby.
r
Left
e
•
Press twice to redial the last number
called.
softkey
m
m
•
•
•
•
•
End a call or quiet the ringer.
Go back one level in the menus.
Leave an option unchanged.
o
C
r
Right
softkey
fo
Press and hold to return to standby.
t
right
left
softkey
label
Press to access the menu tabs from
standby.
softkey
o
label
N
left
softkey
right
softkey
Standby Screen Icons
11
Use...
To...
Use...
To...
•
•
Move through menu, lists, or text. Tilt
up, down, left, or right to scroll.
•
•
•
Delete numbers/letters from the display.
C
Delete an item from a list.
Tilt left or right to access the Main menu
tabs from the standby screen.
Clear key
Press and hold to mute the microphone
during a call. e
•
Press down on the center ( ) to
activate voice control.
•
Press and hold from standby to turn
s
Joystick/
Center
Select
silent on or off or to lock the keypad.
U
•a
Enter a menu with options. The options
l
•
•
•
•
Tilt to the left for easy access to My
Shortcuts.
i
vary depending on what function you are
currently using.
c
r
Tilt and hold to the left for quick access
to the first item in your list of shortcuts.
Tilt and hold to the right for quick acmcess
e
OPTIONS
•
Press to enter the Options menu from
standby.
m
key
to your contact list.
o
Tilt up or down (from standby) for easy
access to your contact list. Your first
C
Throughout this user’s guide,
shown when you can use the OPTIONS key.
will be
r
contact will be highlighted.
fo
If no options are available, a pop-up screen
will not appear.
t
o
N
12
Standby Screen Icons
Use...
To...
Use...
To...
•
•
•
Enter the digits 0–9 and letters.
•
Increase or decrease the volume of the
earpiece or handsfree loudspeaker during
a call.
Move through menus using shortcuts.
Press and hold for Super dial or
Phonebook contact access, depending on
how your phone is configured. See
“Long Press” on page 23.
•
•
Cycle through menus, lists, and text.
e
Enter the Status menu from the standby
Side
volume
keys
s
Digit keys
screen whUich displays the date, the
current profile, and other settings.
l
1
•
Press and hold
voicemail.
for quick access to
a
i
•
Press to quiet the ringer.
c
•
Press and hold to activate voice dialing
r
•
•
Enter a *.
e
and automatic speech recognition.
m
Press and hold to enter a pause (
character in phone number input.
)
•
Press to power your phone on and off.
You can power your phone off during a
call or from any menu.
Asterisk
key
m
o
•
Shift between uppercase and lowercase
C
Power key
in text entry.
r
•
•
Enter a #.
fo
t
Press and hold to enter a stop (
)
o
characterNin phone number input.
Pound key
Standby Screen Icons
13
Getting Started
Before using your phone, you must first attach and charge Attaching Your Battery
your battery.
1
Locate the
connector
at the end
of the
5
Charging Your Battery
To charge your battery for the first time, you must attach
your phone’s battery to the back of your phone under the
back cover. Then, you must replace the back cover.
e
s
blue, red,
and black
wires.
U
l
Once you install your battery, you should not need to
remove it.
a
Insert the
i
2
c
plug. The
r
e
cable will
only fit
one way.
Do not
force it.
The
m
m
o
C
r
3
battery
will lay
flat.
fo
t
o
N
14
Getting Started
Replacing the Back Cover
1
Remove the back
cover. Use one hand
to press down on the
back cover latch and
the other hand to
slide the cover off
the phone.
1
Locate the
notches
along each
side of the
back of the
phone.
e
2
Using the
notches as a
guide, slide
the back
s
U
2
Locate the latcheslat
the bottom of your
a
i
phone.
cover
c
r
upward until
it clicks in
place.
e
m
m
o
Changing Front and Back Covers
C
r
Removing Your Phone’s Covers
Your phone is equipped with replaceable covers.
fo
t
o
Never use your phone with the front or back
cover removed.
Note!
N
Getting Started
15
3
4
Press down on the
latches while lifting
the front cover away
from the phone
(remove from the
bottom).
Replacing Your Phone’s Covers
1
Place the keypad in the new
cover, pressing firmly until the
keys are properly in place.
Locate the tab on the top of the
cover.
2
3
Remove the keypad
from the cover.
Holding the front cover atean
angle, as shown in thes
illustration, insertUthe tab into
l
the notch on the phone.
a
i
4
Slidecthe back cover up and
r
snap it into place.
To replace the back cover, see
5 e
m
“Replacing the Back Cover”
on page 15.
m
If all keys are not functioning
properly, remove your front and
back covers, adjust your keypad,
and reinstall again using steps 2-4.
o
C
r
fo
t
o
N
16
Getting Started
* It may take up to 30 minutes for a new or fully
discharged battery to indicate charging. It takes about
12 hours to fully charge a battery for the first time. For
optimal performance, do not allow your battery to
completely discharge.
Charging Your Battery
Your phone is packaged with a Lithium Ion (LiIon)
battery. The battery is not charged when you buy your
phone, but there may be enough power to switch the
phone on.
The battery meter icon ( ) on your standby screen
indicates how much remaining strength your battery has.
First Time Battery Use
e
Fully charge the battery before you use your phone for
the first time. Your battery can be charged whenever you
want without affecting its performance. You can also
charge the battery when the phone is off.
s
The total remaining talk time depends on the
Note!
U
type of battery you use and your position in the
l
network.a
Thecphone turns itself off when the battery can
i
Note!
r
e
no longer power it satisfactorily.
12 h.
m
*
Charging Indicators
m
•
Attention Battery Low (with a short beep)
o
Phone needs charging.
C
r
•
Optimized Charging (meter pulses continuously)
Your battery is fully charged when the meter stops
pulsing.
fo
*
t
o
N
Getting Started
17
Charging
Turning Your Phone On and Off
1
Make sure that the battery is attached to the phone and Turn your phone On by pressing and holding the power
that the back cover is properly attached.
Connect the charger to the electrical outlet.
key ( ) until your phone turns on. The phone will beep
(unless silent mode is activated). Turn your phone Off by
2
Connect the charger to the phone as shown in the picture. pressing and holding the power key until your phone
The flash symbol on the plug must face upwards. turns Off.
e
Making and Receiving Calls
U
The main electrical plug may look different
depending on the electrical socket in your
country. The plug may not be used for products Making Calls
Note!
s
l
a
other than Ericsson or Sony Ericsson chargers.
1
Press the numeric keys to enter the phone number you
i
want to call. The number is shown in the display.
c
r
The amount of battery power indicated by your
battery icon is an estimate that may vary
Note!
e
You can press C to erase one or more digits
mNote!
depending on your charging and use patterns.
To ensure adequate power supply, keep yomur
in the display, or press and hold C to erase
all digits.
o
battery fully charged.
C
r
2
Press Call. The number you are dialing is shown in
the display while your phone accesses the wireless
network.
Disconnecting the Charger
Move the plug connected to the phone
1
fo
t
upwards to remove it, as shown in the
3
After the call is connected, the phone number that you
dialed, or the corresponding contact name, will remain
on your screen. The current time is replaced by the
call timer.
2
o
picture.
N
18
Getting Started
4
To end the call, press the right softkey. The duration of Receiving Calls
the call is displayed on your screen. When your phone receives a call, the ringer sounds,
Incoming Call appears in the display, and the display and
For optimal performance, hold your phone near keypad backlight illuminate. You can temporarily quiet
Note!
the base to eliminate interference with the
internal antenna signal.
the ringer by pressing the right softkey or the upper or
lower side keys, and still answer the call by pressing the
left softkey. If you have Caller Number Identification
e
Making Emergency Calls
Enter the local emergency number and press the left
softkey.
(Caller ID) service from your service provider, the
s
caller’s phone number is shown in the display. The
U
caller’s name will also appear if the phone number is
l
a
found in your phonebook.
i
Auto Keylock and Phonelock do not prohibit
Note!
c
r
emergency number access.
Changing the Earpiece Volume
During a call, you can change the earpiece volume by
pressing one of the side volume keys.
Dial the international access code, the country code, mPush up to increase the volume.
e
m
Making International Calls
1
•
o
the area code (without the leading zero) and tChe phone
•
Push down to decrease the volume.
number.
Press Call.
r
2
Muting the Microphone
fo
During a call, you can turn off the microphone.
t
Check with your serovice provider if you are
Note!
having problemNs making international calls.
•
Press and hold C until Microphone Muted appears in
the display.
•
Press and hold C again to resume the conversation.
Getting Started
19
Using Menus
The main menu has icons that display the top-level
menus. The corresponding title of the selected option is
displayed below the menu tabs when highlighted. Each
menu is represented by an icon. A menu diagram is
located on the inside front cover of this user’s guide.
e
s
Accessing Menus
U
1
2
Scroll to Settings, Select, Display, Select, Menu
•
•
•
•
Press the center select key or the left softkey to choose
the menu, function, or setting that is highlighted.
Help, Select. l
a
i
Select On or Off by tilting your joystick up or down.
c
Prerss Select.
Tilt the joystick up, down, left, or right to navigate
through the menus.
Press the right softkey to go back one level in the menu m
e
structure or to cancel the current action.
m
o
Cycle through the menus by pressing theCupper or
fo
lower side volume keys.
To help you use the menus and functionrs, your phone has
pop-up help texts that explaintthe menus.
o
These help texts are set to On when you buy your phone,
but you can turn them
N
off at any time.
20
Using Menus
Phonebook Menu
For more information on using the phonebook, see
“Using the Phonebook” on page 44.
My Numbers
The My Numbers submenu has the following functions:
•
•
To display your mobile phone number(s).
Call Contact
To display which mobile number your phone is
currently using if your phone is econfigured for multiple
Phonebook entries will appear in alphabetical order by
either first or last name, depending on the sort order you
chose. Select an entry or type in the position number and
press the left softkey to call the highlighted number.
s
subscriptions.
U
If your service provider allows multiple
l
Note!
a
i
subscriptions, the My Numbers submenu
allows you to select which phone number the
phone will use when placing or receiving a call.
Add Contact
c
r
You can store several phone numbers and an email
address for a phonebook entry. Once you have entered all
of your contact information, press the left softkey to add
e
m
If you have not activated a second number with your
service provider, and the display indicates the second
number as selectable (default=ten zeroes), and if you
select the second number as your active number, your
phone will not be able to make or receive calls. Be sure to
select your active phone number using the My Numbers
submenu.
m
the entry to your phonebook.
o
C
contact is dependent on your service provider.
fo
The ability to store an email addrerss for a
Note!
t
Edit Contact
o
You can locate and update your phonebook entries
whenever you want. These entries are also listed in their
sort order.
N
Phonebook Menu
21
Groups
Dialing delay; Code first or Number first; Verification
number; and Dialing delay again.
You can organize the members of your phonebook into
categories. This feature can be used for call screening if
your network supports Caller ID. You can also send SMS Set Calling Cards
messages to all group members at one time.
You can select which calling card to use for a particular
call. You can select a specific calling card by pressing
your joystick up or down untiel the calling card you want
Calling Cards
You can store calling card numbers to use for making
local and long distance calls. The options are Card Setup highlighted selection.
and Set Calling Cards.
to use is highlighted. Press the left softkey to choose the
s
U
Onlyacards that have been set up will appear as
l
Note!
i
You will be prompted to enter your PIN to enter
the Calling Cards submenu. The default PIN
is 0000.
options for Default card.
Note!
c
r
e
mEnter or recall the phone number you want to call.
Making a Calling Card Call
1
2
m
Card Setup
Press the left softkey. The calling card access number
is shown in the display.
o
To set up your calling cards, make sure youChave the
Calling Card Access Numbers (numberrs provided by
3
Release the key after the number has been displayed.
your long distance service provider) and the Verification
If you are using stops between numbers, you must press
the left softkey to send the next sequence of numbers. If
you use pauses, the numbers are sent automatically after
the specified length of time chosen for the dialing delay.
For more information on Stops and Pauses, see “Stop and
Pause Dialing” on page 44.
Numbers (numbers you must enter to allow the calling
fo
t
card call to be completed).
o
When you enter the Card Setup submenu, you are
prompted for the following information: Your PIN; the
Name of your calling card; the Access number; the
N
22
Phonebook Menu
Options
to press and hold keys 2-9 and your list of phonebook
entries corresponding to the closest letter mapped to the
key pressed will be displayed.
You can edit phonebook positions, change phonebook
entry sort order, set long press functionality, ask to save
confirmation, or delete all phonebook entries.
The 1 key is reserved for your voicemail access
Note!
Edit Positions
number.
You can change position numbers associated with all of
the entries you have in your phonebook for easier access
to speed dial positions.
e
phonebook entry uponlcall completion. If the phone
Ask to Save
s
You have the option of storing a dialed phone number as a
U
number is already saved in your phonebook, you will not
If you synchronize your computer’s contact list
with your phone’s contact list, the position
numbers in your phone’s contact list will be
overwritten.
Note!
a
i
be prompted to save it to your phonebook again.
Delete Allr
c
e
You can delete all of the phonebook entries that are stored
inmyour phone. When you select Delete All, you will be
Sort Order
m
prompted to confirm that you want to delete all of the
positions in your phonebook. If you press the left softkey,
you will be prompted for your phonelock code. You must
correctly enter your phonelock code to delete all of your
phonebook entries.
You can choose whether you want your phonebook
entries searched by first name or last name.
o
C
r
You can specify the outcome of a t“press and hold” on a
Long Press
fo
digit key. The options are SuperSpd Dial, Phb. Shortcut,
o
Memory Status
and Off.
N
You can see how much of your phone’s memory is vacant
and how much is being used. The number of entries used
is listed first, and the total number of positions available
is listed in parentheses.
Enabling SuperSpd Dial allows you to press and hold
keys 2 through 9 to dial the number corresponding to the
phonebook position. Enabling Phb. Shortcut allows you
Phonebook Menu
23
Messages Menu
The Messages menu contains choices for specifying and SMS
accessing message services that may be available from
your service provider (for example, text messages and
voicemail). For details on sending and receiving
messages, see “Text Messaging” on page 52.
The SMS submenu contains the following submenus:
Received Mail, Send New, Chat, Unsent Mail, Sent Mail,
Templates, Empty Mailboxes, Options, and Memory
Status. For more informationeon sending and receiving
U
text messages, see “Text Messaging” on page 52.
s
Call Voicemail
The Call Voicemail submenu allows you to enter and
access your voicemail access number if you have
voicemail service from your service provider.
Options
l
a
i
Message options will appear when you are in the
Messages menu. To see the Message options, press
.
c
r
For more information on using the options, see “Message
e
You can store your voicemail access number(s) so that a
number automatically displays when you receive a
voicemail notice.
Options” on page 52.
m
Options may include: Message Alert and Voicemail No.
m
o
Once you have stored your voicemail access number, you
Memory Status
C
can retrieve voicemail messages by pressing and
You can see valuable information about what percentage
of the phone’s memory is available for SMS messages. The
information is displayed as % Locked, % Memory Free.
1
. Contact your service provrider if you do not
holding
know your voicemail access number.
fo
Scroll to Messages, Soelect, Options, Select, Call
t
1
Voicemail No., Select.
N
2
Enter your voicemail phone number and press OK.
24
Messages Menu
Call Info Menu
The Call info menu allows you to view information and
establish dialing and answering preferences for your
phone (some selections available in this menu are
dependent on your service provider). It also enables you
to view and edit system options and call statistics.
Call List
Press the left softkey to view the last 30 received, missed,
and sent calls.
From this list you may view details, call, add the number
to your phonebook, or delete the number.
e
Call: Select the numberUyou would like to call. Press
s
•
Missed Calls
the left softkey to call the number.
You can see the list of calls you have missed (if you have
Caller ID service from your service provider) along with
the time that the calls were received. When a missed call
is one day old, the time that the call was received is
replaced with the date that the call was received. The
latest call appears first. Tilt your joystick up or down to
scroll through the list. The Missed Calls icon
l
for theafollowing options:
c
•
•
Press
i
Edit Before Call allows you to change the number
r
e
before dialing.
• m
CC Call allows you to dial the number using a calling
m
card.
o
indicates a missed or unanswered call.
•
Add Number allows you to add the number to your
C
Phonebook.
If the received number is stored in the phonebook with a
r
name, the name is also shown in the dfispolay. To dial the
•
Delete allows you to erase the number from your
phone number shown in the displaty, press the left softkey
twice. To edit the phone number, press once, scroll to
o
Call List.
One of the following icons will appear next to each
number in the Call List.
EDIT BEFORE CALL then press Select. Then tilt the
N
joystick to the left or right to move the cursor left or right
to the digit(s) that you would like to change. Dial the new
phone number by pressing the left softkey.
•
Indicates a missed call in your Call List.
Call Info Menu
25
Incoming Time
You can see the total length of all of your incoming calls
since you last reset your phone.
•
•
Indicates an incoming call in your Call List.
Indicates an outgoing call in your Call List.
Usage Tracker
SMS Counter
You can use these options to easily track your phone use.
You can see the total number of SMS messages you
have sent.
e
Last Call
s
You can view information about the duration of your last
phone call in hours, minutes, and seconds.
Clear
U
options are Caall Timers and SMS Counter. Call timers
You can reset your call time and/or your call counter. The
l
i
outegoing and incoming. SMS counter resets the total
Total Calls
resets the total time and total number of calls, both
c
r
You can see the total number of calls and the total hours,
minutes, and seconds that you have used since you last
reset your phone.
number of incoming and outgoing SMS messages.
m
m
o
Minute Minder
The actual time your service provider invoices
Note!
You can choose if you want to hear a sound every minute
during phone calls. The options are On and Off.
C
may vary, depending on items including
r
network features and rofunoding off for billing.
Options
t
Outgoing Time
o
You can see the totalNlength of all of your outgoing calls
Clear Call List
You can delete the list of your 30 most recent calls.
since you last reset your phone.
26
Call Info Menu
Ongoing Call Menu
You can access Ongoing Call menu only when you are on Switch Calls
a call. To access the Ongoing Call menu, tilt the joystick
to the left or right until you see Ongoing Call and press
You can change from one active call to another. Select
Switch Calls by tilting the joystick up or down until
Select. The options for Ongoing Call are Turn Off Tones, Switch Calls is highlighted and then select it by pressing
Hold Call, Switch Calls, Release Active, Retrieve Call,
and the Call Info menu.
the left softkey.
e
s
Release Active
You can end the active call by selecting Release Active.
Select Release Active by tilting the joystick up or down
U
These features are dependent upon your service
provider.
Note!
l
a
i
until Release Active is highlighted and then select it by
c
r
pressing the left softkey.
Turn Off Tones
e
The Turn Off Tones submenu allows you to make notes
(digits only) during a call without disturbing the person
on the other end with dialing tones. When you Turn Off m
o
Retrieve Call
m
You can recover a held call and make it active. Select
Retrieve Call by tilting the joystick up or down until
Retrieve Call is highlighted and then select it by pressing
the left softkey.
Tones, you can use your phone as a scratchpad aCnd enter
digits that will remain on the display after thre call has
ended. When the call is complete, the tones will return
to On.
fo
Call Info
t
You can return to the Call Info menu by tilting the
joystick up or down until it is highlighted and then select
it by pressing the left softkey.
o
Hold Call
You can place a call on ho
answer a waiting call. Select Hold Call by tilting the
joystick up or down until Hold Call is highlighted and
then select it by pressing the left softkey.
N
ld to set up another call or to
Ongoing Call Menu
27
Settings Menu
Sounds & Alerts
Increasing Ring
You can change the sounds and alerts on your phone.
When you select Increasing Ring, the ring volume will
continue to increase until you answer or reject the call.
You can activate or deactivate Increasing Ring by
Ring Volume
e
You can set the level of the ring volume. The volumes
range from Off to High. You can change the Ring Volume
by moving your joystick to the right (to increase the
volume) or to the left (to decrease the volume). Press the
left softkey or press the joystick to confirm your
selection.
choosing On or Off.
s
U
Vibrating Alert
Your phone has a lbuilt-in vibrating alert function so you
can receive calls or messages silently. The options are
a
i
On, On ifcSilent and Off.
e
r
If you set the Ring Volume to level one, you
Ring Sounds
Note!
m
will hear only a series of beeps when you
You can choose the type of sound or melody for the ringer
receive an incoming call regardless of the Ring for Voice Calls, Fax Calls, and Personal Rings. Each
m
o
Signal you have set.
sound or melody is demonstrated as you scroll through
the selections. There are multiple ring sounds, some of
which you can create yourself.
C
r
You can specify that you do ntot want your phone to make
Phone Silent
fo
icon on your screen
keypad or alert sounds. The
Alarm Sound
o
indicates that your phone is in Silent. You can activate or You can select different types of melodies or signals to
N
deactivate Phone Silent by choosing On or Off.
hear when your alarm sounds.
28
Settings Menu
Message Alert
to play the melody. Press and hold C to delete multiple
Choose which type of sound you will hear when you
receive an incoming SMS or voicemail. The options are
Silent, Click, and Tone.
notes.
Volume is the same as your current Ring
Note!
Volume.
My Melodies
You can create or edit a ring melody using each key on
your keypad as a note (1=C, 2=D, 3=E, 4=F, 5=G, 6=A,
7=B, 8=+C, 9=+D, 0=+, *=pause, #=#).
Your phone comes with eight customizable melodies. The
e
My Melodies submenu includes Edit options.
s
U
Your mobile phone has the capability to load, store and
l
forward additionalaringtone melodies. The use of such
parties, including but not limited to restriction under
d
g
c
f
e
i
melodies maycbe restricted or prohibited by rights of third
a
r
+c
b
+d
e
applicable copyright laws. You, and not Sony Ericsson,
pause
are entirely responsible for additional melodies that you
download to or forward from your mobile phone. Prior to
use of any additional melodies, please verify that your
intended use is properly licensed or is otherwise
m
m
Hold the key to cycle through all four note lengths (foor
example, f, f., F, F.). Press # to make the previouCs note
authorized. Sony Ericsson does not guarantee the
accuracy, integrity or quality of any additional ringtones
or any other third party content. Under no circumstances
will Sony Ericsson be liable in any way for your improper
use of additional ringtones or other third party content.
r
sharp or flat. Once you personalize a melody, you can
select it as a Ring Sound.
fo
The + sign indicatesoan octave higher.
t
Note!
N
To clear your melody, tilt the joystick left or right to
select the location you want to clear. Press the left softkey
This feature is dependent on your service
provider.
Note!
Settings Menu
29
Editing My Melodies
Voice Privacy
You can block others from eavesdropping on your
telephone calls. The options are On With Tone, On But
No Tone, and Off.
• Press a key to enter a note.
• There are four different lengths of notes.
• Press 0 to change the octave.
• Press # once to raise the note one semitone.
• Press # twice to lower the note one semitone.
• Press C to remove notes.
This feature is dependent on your service
Note!
provider.
e
s
• To listen to your melody, press the left softkey.
Profiles
U
A profile is a group of settings which are set to suit a
l
a
certain environment. For example, when you go to a
Key Sound
i
numberr of settings that suit a meeting are set. For
meeting, you can simply choose the Meeting profile and a
Choose which type of sound you will hear when you
press a key. The options are Silent, Click, and Tone. Tone
c
e
instance, the ring volume is turned off.
psurochviadsestealecpohnotnineuboaunsksiinggn,awl,hmiloerceliscukitapbrolevifdoersaactqivuiitcieks m
m
Select Profile
You can choose a different profile from the currently
selected Profile. The available profiles are Normal (no
burst signal.
o
You can choose which, if any, sound yoru will hear when
C
Access Tone
icon), Meeting (
), Car (
), Outdoors, (
)
Portable ( ), Home (
), Work ( ), and TTY (TTY).
your phone makes a voice connec
f
tion. The options for
o
t
Access Tone are On and oOff.
Edit Profile
N
You can customize your profiles by specifying settings
for specific items. The options for Edit Profile are Ring
Volume, Phone Silent, Increasing Ring, Vibrating Alert,
Minute Minder
You can choose to be notified when each minute passes
while you are engaged in a call. Settings are On and Off.
30
Settings Menu
Ring Sounds, Message Alert, Key Sound, Accept Calls, and Accepted List. Under Accept Options, you can
Auto Area Code, Auto Prefix, Answering Mode, Light,
Text Size, Profile Name, and Accessories. For example,
in Meeting profile, you might want to set your Vibrating
Alert to On and your Ring Volume to Off. When you go
into a meeting, you can select Meeting profile. If you
receive a call during your meeting, your phone’s
Vibrating alert feature will notify you of an incoming
call, but your ringer will not sound and disturb other
meeting participants.
choose From All, From List (you can create a list of
callers that will cause your phone to ring), and From No
One.
Forward Calls
You can forward the incoming calls that you are unable to
answer. The options are Activate, eDeactivate, and Setup.
U
s
This feature is dependent on your service
Note!
l
provider.a
c
i
Yrou will need separate codes from your service
The Normal profile cannot be renamed.
Note!
Note!
e
View Profile
provider to turn the feature on and off.
m
You can view the attributes of the currently selected profile.
m
Once you have entered these codes, select Activate, then
enter the number to which you want your calls forwarded.
Your phone will send the appropriate information to your
service provider to set up this feature.
o
Reset Profiles
C
You can reset all profile settings to the way rthey were set
when you bought your phone.
fo
t
Call Options
o
N
Accept Calls
You can specify the phone numbers that you would like to
accept calls from. Your choices include Accept Options
Settings Menu
31
Restrict Calls
Once you enter your code, select Activate to turn Call
You can block specific calls from being dialed or
answered. The options are Incoming Calls or Outgoing
Calls.
Waiting on and Deactivate to turn Call Waiting off.
During a call, you can also use the Switch Calls
Note!
option to change between the two calls.
If you forward incoming calls, you cannot
Note!
activate some Restrict Calls options. Likewise, Auto Area Code
e
if you restrict calls, you cannot activate some
You can store an area code that will be automatically
s
Forward Calls options.
added to the 7-digit phone number that you are dialing.
U
The options are On and Off. The area code is
l
a
You must enter your phonelock code to set call automatically added to the phone number you are calling
Note!
i
restrictions.
when Auto Area Code is set to On. When you select On,
c
r
you will be prompted for the area code you want to use.
e
Auto Prefix
Call Waiting
You can answer an incoming call while you are engaged m
m
in a call. The options are Activate, Deactivate, aond
You can store a 1- to 12-digit prefix, which is automatically
added to the dialed phone number. When you dial a 4- or
5-digit phone number, the prefix is automatically added to
the phone number. The options are On and Off.
Setup. Setup allows you to customize yourCservice.
r
This feature is dependent on your service
Note!
provider.
fo
When you selecot Setup, you will need to enter
In order to send a number to office extensions, store the
3-digit prefix in the Auto Prefix submenu. You only need
to dial the last four or five digits of the phone number.
t
Note!
N
the code for activating/deactivating this feature.
For example, if you save 123 as the auto prefix and the
function is On, you can call 123-7654 by simply
dialing 7654. The prefix 123 is automatically added to the
This code is given to you by your service
provider.
32
Settings Menu
phone number after you press the left softkey to dial the
phone number. The auto prefix is not added for phone
numbers longer than five digits.
Data and Fax
You can specify which type of call you are planning to
receive. The options for Data and Fax are Next Call
Voice, Next Call Data, and Next Call Fax.
Answering Mode
Display
You can specify how you want to answer your calls. The
options are Normal, Any Key, and Auto. Selecting Normal
indicates that pressing the left softkey will answer a call.
Selecting Any Key indicates that a call can be answered by
pressing any key except the right softkey. Selecting Auto
indicates that a call will be answered automatically.
Your options for Display are Light, Display Sleep,
Background, Text Size, Contrast,eUser Greeting, and
Menu Help.
s
U
You can set the diisplay and keypad backlighting to stay
l
a
Light
c
when aecall is received or a key is pressed.
r
On or Off or to automatically turn On for 30 seconds
Auto Retry
You can automatically redial a number without dialing,
hanging up, and dialing again by setting Auto Retry to
On. Auto Retry is used when the system is busy
m
m
Display Sleep
o
Use Display Sleep to save battery power. The text in
standby mode is reduced to one row at the middle of the
display a few minutes after you have pressed the last key.
regardless of whether the receiver’s phone is busy.
C
r
Voice Privacy
You can block others from eavesdropping on your
fo
This feature is dependent on your service
telephone calls. The options are Otn With Tone, On But
N
Note!
o
provider.
No Tone, and Off.
Background
This feature is dependent on your service
provider.
Note!
Use Background to select a picture that will appear in
your standby screen.
Settings Menu
33
Text Size
Language
You can change the display text size to Small, Medium, or You can select the display language used in the phone
Large. Changing the text size alters the number of lines of display. The languages vary between markets.
text that appear on your display and alters the font size.
Menu Language
Contrast
You can select in which language you would like the
Use Contrast to adjust the difference in brightness
between the light and dark areas of your display by tilting
the joystick left or right or by pressing the up or down
side volume keys.
phone’s menu to appear. The options are English,
Russian, Hebrew, Spanish, Ferench, and Portuguese.
U
s
Input Language
l
You can selectawhich language you would like to be able
i
theeT9™ Text Input setting.
User Greeting
to input text in. The options for Input vary according to
c
r
You can change the screen that you see when you power on
your phone. The options are a list of Ericsson Movie, My
Greeting, My Animation, and Off. You can download
m
All languages are not available in every area.
Note!
m
additional software to change your power-up/power-down
T9 Predictive
You can determine whether predictive text is displayed
during text input. The options are On and Off.
o
C
r
Menu Help
You can choose to have a brief description of each top-
fo
level menu item to be displayted after 10 seconds of
o
inactivity. These help texts are set to On when you buy
N
your phone, but you can turn them off at any time.
34
Settings Menu
Time and Date
Date Format
You can switch between date formats by tilting the
joystick up or down until the format you want is selected.
Press the left softkey to confirm your selection.
Set Time
You can enter the correct time in the format using the
keys on your keypad.
Locks
If you select the 12-hour clock, you can
alternate between am and pm by tilting the
joystick up or down.
Note!
e
Phonelock
s
You can prohibit your phone from making calls, except
emergency calls, each time you turn the phone on. To
set your Phonelock, you will be prompted to enter your
U
l
Time Settings
a
i
You can set additional time-related settings. The options
are Time Format (24 hour or am/pm), Time Zone
(±GMT), DaylightSavings (On or Off), and Auto Time
Zone (On of Off). The options for Auto Time Zone are No
Update, Ask To Update, and Auto Update.
security code. The options are Set Phonelock and
c
r
Change Code.
e
m
You will be prompted to enter your PIN to enter
set your Phonelock. The default PIN is 0000.
m Note!
To synchronize your phone with your compouter,
C
be sure to set both to the same timre zone.
Note!
Auto Keylock
You can prohibit your phone from keypad presses. Auto
Keylock activates after 30 seconds of inactivity. The two
options for Auto Keylock are On and Off. The keypad
remains locked until you:
fo
Set Date
t
You can enter the correct date using the keys on your
o
keypad. You will be prompted for month, day, and year
N
information. You can tilt the joystick left or right to
•
•
Unlock the keypad by pressing C then Yes.
advance through the month, day, and year selection. Press
the left softkey to confirm the current date.
Answer a call (after the call is completed, the keypad is
returned to the locked state).
Settings Menu
35
Networks
The Auto Keylock and Phonelock features
allow emergency number access even if the
Auto Keylock or Phonelock are active. To
unlock your keypad, press C then Yes.
Note!
You can prioritize and manually select the systems from
which you can obtain service. This can include your
public home system as well as private and residential
systems. This function is particularly useful if you have
access to more than one mobile system. Only systems
Voice Control
that are currently available caen be selected. This varies
depending on your geographic location. You will be
s
Voice Settings
prompted to enter your PIN to make any modifications.
U
You can turn voice control features on or off and train the
commands for using these features. The options are Voice
Dialing, Voice Answer, Voice Memo, and Magic Word.
For more information, see “Using Voice Commands” on
page 58.
This is typically not necessary so you should contact your
l
a
service provider before making any network changes.
i
Notre! These features are dependent on your service
c
provider.
e
m
Voice Commands
You can choose to view your list of voice commoands.
Select Network
m
You can manually initiate a search for a new network.
Commands include Magic Word, Voice DiaCling, Voice
fo
New Private
r
Answer, Contacts, and Voice Memo
You can search for private systems that are not programmed
into your phone. Once the search is complete, you will be
provided with a list of available systems.
Erase Voice Tag
t
o
prompted before the
You can delete all ofNyour voice recordings. You will be
36
Settings Menu
Priority
You can change the order of the system types for which
your phone searches. Your default Priority is
(1) Residential, (2) Private, and (3) Public. This means
that your phone will look for service on a Public system
first, followed by a Private system, followed by a
Residential system.
e
s
Reset Settings
You can reset all of your phone settings to the factory
defaults.
U
l
a
i
c
r
You must enter your phonelock code to reset all
of your phone’s settings to the factory defaults.
Note!
e
m
m
o
C
r
fo
t
o
N
Settings Menu
37
Extras Menu
Voice Memo
Calendar
You can record and store memos in your phone. For more Your calendar can store up to 250 events and up to
information on Voice Memo, see “Using Voice
Commands” on page 58.
100 tasks on your phone. For more information, see
“Using the Calendar” on page 66.
e
s
Record
Time
U
You can enter a new voice memo.
l
Alarm Clock
a
i
Memo List
The phone has an alarm clock which rings at the time set,
c
You can see your list of voice memos viewable by date,
time, or length. Scroll to the voice memo you want to
hear and press Play. You can erase or rename your voice
r
even if the phone is turned off. The alarm rings for
60 eseconds. After 60 seconds, you will be asked if you
m
want to turn the alarm off. To turn the alarm off, press the
left softkey. If you do not want the alarm to be repeated,
press the left softkey again. The options for Alarm Clock
are Alarm and Recurrent Alarm. An Alarm sounds one
time. A Recurrent Alarm sounds on a regular interval.
memos by pressing
once you are in your Memo List.
m
o
Erase Memos
You can permanently delete your voice memos You will
be prompted to confirm deletion of all voice memos
before they are deleted.
C
r
fo
Time and Date
You can edit your time and date information. For more
information, see “Time and Date” on page 35.
t
o
Set View
N
You can see attributes of your memos. The options are
Date Recorded, Time Recorded, and Length.
38
Extras Menu
Timer
You can also set scores in Games by using the left or
The phone has a built-in 24-hour countdown timer. You
set the time you want and when that time is up, the phone
beeps.
right navigation key to set the letters of your name.
Extended playing of Games will significantly
Note!
reduce your battery talk and standby times.
Stopwatch
Your phone has a built-in stopwatch. The left softkey
starts and subsequently pauses the Stopwatch. The right
softkey resets the Stopwatch.
Pictures
e
s
Editing and saving a picture
U
1
2
3
Scroll to Extras, Pictures.
l
Select a pictureagroup.
You can save up to nine lap times by pressing
Note!
i
picturesr. Select a picture and press Edit to view the
Lap while the Stopwatch is running.
Tilt the joystick up or down to scroll through the
c
e
Games
editing tools. You can now start to edit the picture. See
m
Your phone has several games.You can control the games
the table below.
Press
m
4
using your joystick and the keys on your keypad andoyou
to view your options.
can end the game by pressing the left softkey. UCse the
5
Select Save. The picture is saved in My Pictures.
joystick to move up, down, left, or right and to select an
How to use the keys when editing a picture:
r
item, or use the keypad as follows:
Adding a picture to My Favorites
fo
2=up
4=left
8=down
o
6=right
t
1
2
Scroll to Extras, Pictures.
Select a picture group.
N
C=pause
Cancel=save/quit
#=undo
5=select/deselect
Select=confirm
*=reset
3
4
Select a picture and press
Press Yes to add the picture.
.
Extras Menu
39
You can delete the edited pictures from Pictures, but you followed by a 4- to 15-character check word. If an
cannot delete the original pictures that were in the phone incorrect password and/or check word is entered, an error
when you bought it.
message is displayed.
Deleting a picture from My Favorites
Options List on Options Key
1
Scroll to Extras, Pictures, My Pictures.
There are some options available when TTY is selected
and a call is ongoing. To viewethese options, press
Scroll to a picture and press C.
during a TTY call.
Turn On VCO, ifUVCO is turned off and Turn Off
s
VCO, if VCOlis turned on.
Calculator
1
The phone has a built-in calculator, which can add,
subtract, multiply, and divide.
a
i
2
Turn On HCO, if HCO is turned off and Turn Off
c
HCO, if HCO is turned on.
r
• Press the digit keys to enter the numbers you want
to calculate.
• Tilt the joystick right or left to highlight an
operation (+, -, x, /, add decimal).
e
The handset Turn on HCO Mode option and
mNote!
Turn on VCO Mode option should not be used
if external HCO/ VCO features are built into
the TTY device. The handset option items are
intended as an alternative method of gaining
access to HCO and VCO, but are not required
to be activated if the external TTY device has
the HCO/VCO feature.
m
o
C
• Press the left softkey to perform rthe operation.
• Press the right softkey to cfanocel the operation.
t
Code Memo
o
You can store personNal information, like your computer
After you have verified that your phone operates in TTY
mode and you want to switch back to handheld phone
operation, unplug the 2.5 mm plug from your phone. You
can then use your phone normally.
password, in your phone. You will only have to remember
one password to access all personal codes and passwords.
You will be prompted to enter a 4-digit password,
40
Extras Menu
If you want to switch from handheld to TTY operation
(after you are in TTY mode), simply re-insert the 2.5 mm
plug into the handset jack. You will know your phone is
back in TTY operation because the TTY symbol will
reappear in the lower lefthand corner of your display.
•
Vehicle HF reduces echo heard by remote party when
using third-party vehicle handsfree device which is
typically powered by the cigarette lighter.
To work with a TTY accessory, activate TTY by scrolling
to TTY in the Extras, Headset Jack menu, and pressing
Select.
Your Sony Ericsson mobile phone has a menu
timer that clears the display if a key is not
pressed within 19 seconds.
Note!
e
Your phone is now set to workswith a recommended TTY
device. To verify that your phone is in TTY Mode, insert
U
the TTY cable end 2.5 mm plug into your phone’s audio
l
jack (to the right of the display). TTY will display in small
a
Headset Jack
i
accept and rsend TTY calls.
print on the lower left corner of the display. You can now
You can use your TTY terminal with your Sony Ericsson
mobile phone. The following is a list of options available
under the Headset Jack menu:
c
e
Omptimum Use
•
•
•
Use SonyEricssonPHF with the portable hands-free
TTY communications can be conducted from moving
m
accessory that comes in the kit (default setting).
o
vehicles, however, it may be dangerous to operate a
vehicle and communicate on your mobile phone at the
same time. You may experience a higher character error
rate of the TTY conversation while in motion. For the
highest quality communications, it is best to remain
stationary.
C
In-Ear PHF improves intelligibility with third-party
r
portable handsfree devices that fit in the ear canal.
fo
Over-Ear PHF improves the intelligibility with third-
party portable handsfree devicets that hook over and
N
o
rest outside the ear.
•
Select TTY to work with TTY devices.
Extras Menu
41
The TTY feature works in most signal strength areas. You Technical Assistance
may experience a higher character error rate in low signal For information on Accessible Solutions for individuals
coverage areas. You may be able to move the cellular
handset to get a better signal to reduce the character
errors.
with Special Needs, contact the Sony Ericsson Special
Needs Center:
•
•
1-877-878-1996 (TTY)
1-877-207-2056 (voice)
Status Information
Visit the Sony Ericsson Specieal Needs Center at
You can access the status screen by pressing the upper or
lower side volume key when you are not on a call. The
screen will display the handset’s TTY status when TTY
mode is On.
s
U
l
Accessoriesa
i
r
c
The Accessories submenu allows you to work with the
TTY Call Types
The TTY mode turns On TTY capability in the phone and
allows the phone to signal to 911 centers, 711 centers,
accessories that are currently connected to your phone.
e
m
When more than one accessory is in use
Note!
landline users, and users of other cell phone devices.
m
simultaneously, you will receive a warning that
you may experience performance degradation.
You can also place calls to TTY users that use other
o
digital wireless cell phone technologies, such as CDMA
C
or GSM.
r
fo
The Sony Ericsson PHF accessory selection is
the default. This selection remains active until it
Note!
t
o
is changed.
N
42
Extras Menu
My Shortcuts Menu
Edit shortcuts
You can place your favorite functions in My Shortcuts so
that you can quickly and easily reach the functions you
use most. When you buy your phone, My Shortcuts
contains a few functions which you can remove if you
wish.
e
s
U
1
2
3
Scroll to My Shortcuts, Select, Edit Shortcuts,
Select.
Select the function you want to edit by pressing
CHECK.
Clear the current position number by pressing C and
then enter the position number you want for the
l
a
i
c
r
e
m
m
selected function and press OK.
Press the left softkey to CHECK or UNCHECK yoour
4
5
C
settings.
r
Press the right softkey to exit. You will be prompted to
save your settings. Press the left softkey to save your
fo
settings or the right softkey to tcancel your settings.
N
o
My Shortcuts Menu
43
Using the Phonebook
You can create your personal phonebook by saving
information about your friends and colleagues as a
contact. In a contact, you can save details such as name,
title, phone numbers, and e-mail address – all in one
place.
save the entry in your phonebook.
If voice dialing is on, you are asked if you want to
save a voice tag for the contact.
The ability to store an email address for a
Note!
e
contact is dependent on your service provider.
s
Adding Contacts
U
For each contact, you can fill in the following
information: first name, last name, company, title, home
phone number, work phone number, mobile phone
number, fax number, other phone number, and e-mail
address. The contacts are saved in the phone.
Each phone number saved occupies one
position in the memory. You can save up to
500 phone numbers in the phone.
Note!
l
a
i
c
r
e
Stop and Pause Dialing
m
Stop and pause dialing lets you enter groups of numbers
m
You can toggle between Multitap and T9 while with stops and pauses between each group of numbers.
Note!
o
in a text field by pressing
input method.
This feature is useful when you need to dial a phone
number and then another number, such as an access
number for an answering machine or voicemail system.
then Cchoosing an
r
Adding New Contacts
fo
Press the left softkey and enter a first name. Press the
A stop causes the phone to stop transmitting numbers
until you press the left softkey. You can enter a stop in a
series of digits by pressing and holding # or by pressing
, and then selecting Insert Stop. A is shown in the
phone number whenever there is a stop.
t
Scroll to Phonebook, oSelect, Add Contact, Select.
left softkey twiceNand enter a last name, and so on.
1
2
3
When you have filled in the information you want,
press the right softkey to exit. You will be prompted to
44
Using the Phonebook
A pause temporarily suspends transmitting numbers for
approximately two seconds before sending the next
series. You can enter a pause in a series of digits by
pressing and holding * until is shown in the display.
For example, if your office has a voicemail system that
requires you to dial a phone number, followed by your
extension, followed by an access code, you could enter
the following:
e
s
555-1111 2222 33333.
U
l
When you press the left softkey, your phone dials the
number and then stops transmitting tones. When your
voicemail system asks for your extension you would
press the left softkey to transmit your extension. The
access code is sent after the pause. If the timing in your
a
i
c
r
e
m
voicemail system does not allow for pauses, you can
enter a stop instead of the pause, or use multiple pauses.m
C
o
You can also store groups of numbers which can include
stops and pauses in a location. You can thenrdial the
numbers by entering the location and pressing Call.
fo
t
o
N
Using the Phonebook
45
Calling Contacts
You can find and call a phone number saved in a contact
by searching for either the first or last name, depending
on which sort order you have set.
For example, pressing and holding 2 takes you to the first
contact beginning with the letter A (or closest following).
You must activate Phb. Shortcut under the
Long Press submeneu before using this shortcut.
Note!
Selecting a Sort Order
1
Scroll to Phonebook, Select, Options, Select, Sort
Order, Select.
s
Speed Dialing
U
2
Select a sort order and press Select.
Speed dialing allows you to press the digits (2-99) that
l
a
correspond to your phonebook position numbers. Then,
i
SueperSpeed Dialing
Calling Contacts
press the left softkey to dial the number in that position.
c
r
1
2
Scroll to Phonebook, Select, Call Contact, Select.
You will see your contact list. Scroll to the contact you m
would like to call, press Call.
Enabling SuperSpd Dial allows you to press and hold
keys 2 through 9 to dial the number corresponding to the
phonebook position.
m
3
Scroll to the number you would like to call, poress Call
to make the call.
C
r
Shortcuts to Contacts
When in standby, you can find a contact by pressing and
The 1 key is reserved for quick access to
voicemail.
Note!
Note!
fo
t
holding one of the keys 2-9 to find a contact beginning
o
You must activate SuperSpd Dial under the
Long Press submenu before using this shortcut.
with a specific letter.N
46
Calling Contacts
Editing the Phonebook
You can edit a contact in the phonebook with the Edit
Contact function.
2
You will see your contact list. Scroll through the list
using your joystick and press the left softkey when the
contact you want to call is highlighted.
1
2
Scroll to Phonebook, Select, Edit Contact, Select.
You will see your contact list. Scroll through the list
using your joystick and press the left softkey when the
contact you want to edit is highlighted. If the contact
shown is not the one you want, tilt the joystick up or
down until you find the correct contact.
3
4
5
Press Select to select a contact.
Select Default Number and press Select.
Select the number you want asethe default phone
number. Press Select.
s
U
l
a
i
Deleting Contacts
1
2
3
Press the left softkey. Select Edit Name or Edit
Number and press the left softkey. You can also edit
the position for a phone number by selecting Edit
Position or edit the voice command for the contact
name by selecting Edit Voice Tag.
Scroll to Phonebook, Select, Edit Contact, Select.
You will see your contact list. Scroll through the list
using your joystick and press the left softkey when the
contact is highlighted.
Press C to delete the contact.
Press Yes to confirm.
c
r
e
m
m
3
4
5
Tilt the joystick up or down to go to the details that
o
4
you want to edit.
When you have made your changes, press the left
softkey. Scroll to Save and Exit atfthoe bottom of the
C
To delete all contacts select Phonebook, Select,
Options, Select, Delete All, Select.
r
list and press the left softkey. t
Setting Default Numbers
You can organize your phonebook so that the phone
numbers you use most frequently are easily available.
You can, for example, have certain numbers saved in
positions 1-9 to be able to speed dial them.
o
N
1
Scroll to Phonebook, Select, Edit Contact, Select.
Editing the Phonebook
47
Changing Position Numbers
1
2
3
Scroll to Phonebook, Select, Options, Select, Edit
Position, Select.
Scroll to the phone number you want to move, press
Select.
Scroll to the position to which you want to move the
phone number and press the left softkey. The phone
numbers switch positions.
e
s
4
When you have finished, press the right softkey.
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
48
Editing the Phonebook
Synchronizing Your Phone and PC
To enhance use of your Phonebook features, you may
want to purchase XTNDConnect PC or download a free
abbreviated version of XTNDConnect PC (does not
include email capabilities). XTNDConnect PC is a
software application that allows you to synchronize your
contacts, calendar, and tasks between your mobile phone
and popular PC applications on your computer.
e
s
U
l
To use your mobile phone with the XTNDConnect PC
program, you will need the following:
a
i
c
r
• A functional serial port on your computer
• Microsoft Windows 95/98 SE/Me/NT4/2000
e
m
• A serial interface cable (RS232 Cable DRS-11)
m
(sold separately)
• Mobile Phone Monitor (a software interface
between your mobile phone and the
XTNDConnect PC softwarte)
fo
N
o
C
r
• Purchase XTNDConnect PC (http://
download a free version of XTNDConnect PC
for Sony Ericsson phones only
(www.SonyEricsson.com).
Synchronizing Your Phone and PC
49
Groups
You can create groups of contacts. In this way you can
send a text message to several recipients at the same time.
Editing Group Names
1
2
Scroll to Phonebook, Select, Groups, Select.
Select the group name that you want to edit and press
Select.
Creating New Groups
1
2
3
4
5
Scroll to Phonebook, Select, Groups, Select.
Select Add Group and press Add.
Enter a name for the group and press Add.
Scroll to Add Member, Add.
Enter the first letter of the contact you want to add.
Press OK. The phone will jump to the first contact
whose name begins with that letter. If the contact
shown is not the one you want, tilt the joystick up or
down until you find the correct contact. Press Add.
3
4
Select Edit Group Name and press Select.
e
Enter the new name of the group and press OK.
s
U
Deleting Group Members
1
2
l
Scroll to Phonebook, Select, Groups, Select.
a
i
Select the group that you want to edit and press
c
r
Select.
e
3
Select Edit and press Select.
Scroll to the member that you want to delete and press
the C key.
m
4
m
6
7
Select a number and press Select.
To add the next member, scroll back to Add Member
and press OK.
o
5
Press Yes to confirm your choice.
C
r
Deleting Groups
1
2
Adding New Members to Existing Groups
1
2
Scroll to Phonebook, Select, Groups, Select.
Select the group that you want to delete and press
Select.
Select Delete Group and press Select.
Press Yes to confirm your choice.
fo
Select the group that yoou want to edit and press
Scroll to Phonebook, Select, Groups, Select.
t
Select.
N
3
4
3
Scroll to Edit, Select, Add Member, OK. Continue
the same way as when you add a new member to a
new group.
50
Groups
Touch Tone Service
You can save a phone number together with tone signals
and codes in your phonebook. When you call this entry,
the phone number and all the tone signal codes are then
dialed automatically. This could be useful, for example,
when accessing an answering machine or when using
telephone banking services.
e
s
U
Saving personal codes in the phonebook
involves a risk if your phone is stolen. It is safer
to save personal codes in the Code Memo. See
“Code Memo” on page 40.
Note!
l
a
i
c
r
e
m
Scroll to Phonebook, Select, Add Contact, Select. m
1
2
Press Edit and enter the name that you want to
associate with the phone number and code. PCress OK.
o
3
4
Scroll to Other and press Edit.
Enter the phone number. Press and hold r
until the
pause character ( ) appears in the display. Enter the
fo
t
code, if needed, enter another pause, another code and
o
Scroll to Save and ExNit and press Edit.
so on. Press OK.
5
Touch Tone Service
51
Text Messaging
You can send and receive text messages with the Short
Message Service (SMS) using your mobile phone.
•
•
•
Msg. Priority
You can set the delivery options for your text message.
Subject
You cannot send SMS messages when your
phone is in analog mode.
Note!
You can specify a subject feor your text message.
Nickname
s
You can select a niUckname to send your message from
This feature is operator dependent.
Note!
when doing SMS Chat.
l
Sending Miessages
a
You carn use your keypad to enter the message you want
Before Sending Messages
You have several text messaging options that you can
specify.
c
e
to send. You can send your message to one person or to a
m
predefined group, specified and saved in the phonebook.
For more information on how to create groups, see
“Groups” on page 22. When you send text messages to a
group, you are charged for each member included in the
group.
Message Options
You can create the settings below as default for all ymour
o
messages, or you can turn on the option SetCOn Send,
which means that you choose the settings each time you
r
send a message.
fo
1
Scroll to Messages, Select, SMS, Select, Send New,
Select.
Enter the recipient’s number or press , Groups,
Select, highlight the group that you want to send the
message to, Select.
•
Message Type
t
You can select how you want your text message to be
o
2
interpreted by the recipient.
N
•
Message Read Ack.
You can choose if you would like a return receipt once
a sent message is read by the recipient.
3
Enter your message and press OK.
52
Text Messaging
4
Press OK to send the message. Sending msg appears
in the display followed by Message has been sent.
6
7
Enter the recipient’s number or tilt the joystick to the
left to retrieve the number from the phonebook.
Press OK to send the message.
Sending Messages to Groups
You can send an SMS message to a Group.
If the recipient’s phone does not support long
messages, the messages are received one at a
Note!
1
Scroll to Messages, Select, SMS, Select, Send New,
Select.
time.
e
s
2
When you are prompted for the phone number, press
, Groups, Select, highlight the group that you want
to send the message to, Select. For information about
setting up Groups, see “Groups” on page 50.
Templates
U
use, you can save tahese as templates in your phone. You
If you have one or more standard messages that you often
l
i
can save up to ten templates consisting of up to
c
r
50 characters each.
e
Saving the Message for Later Use
Press the right softkey after you have entered your
message. The message is saved in the Unsent menu.
m
Creating a Template
m Scroll to Messages, Select, SMS, Select, Templates,
1
o
Select, Add New, ADD.
Sending a Message Later
C
Scroll to Messages, Select, SMS, Select, Unsent
2
3
Enter the message and press OK.
1
r
To send the message now, press Select when Use
template for this msg.? appears in the display, and
proceed as described in “Sending Messages” on
page 52. The message is saved in the list of templates.
If you do not want to send the message now, press the
right softkey. The message is saved as a template for
later use.
Mail, Select.
Select the message you want to send and press OK.
Press Select again.
Select Send and press Select. You may now edit your
fo
2
3
4
t
o
N
4
message.
5
Press OK and send the message as previously
described.
Text Messaging
53
Using a Template
softkey to confirm deletion. You cannot delete any of the
standard templates included in your phone.
If you want to use a template as a message, scroll to
Messages, Select, SMS, Select, Templates, Select,
select the template you want from the list and then press
Select. The following Templates are included:
Receiving Text Messages
When you receive a text message, the phone beeps and
the message New message Read now? appears in the
•
Add new? (Allows you to enter text and save as a new
template)
display.
e
s
Reading Text Messages
•
•
•
•
•
•
•
•
•
•
I will be home at ___.
U
1
Press the left softkey when you see the question
New messagelRead now?.
I will be at ___ until ___.
I will be ___ late for ___ on ___.
There is a meeting with ___ about ___ on ___.
OK, I got it.
a
i
If youchave received several messages, and you press
the left softkey at the question above, you enter the
r
Received mail. Select the message that you want to
e
read and press the left softkey.
m
2
Scroll through the message by tilting the joystick up
or down. An arrow in the bottom right-hand corner of
the display indicates that there is more text in the
message. All parts of a long message may not be
received at the same time... indicates that part of the
message has yet to be received.
Please call ___ at ___.
m
o
Please call me back.
C
Please get ___ from ___ by ___.
r
Please pick me up from ___ atf__o_.
See you later.
t
o
If the sender of the message wants you to reply,
the display shows Reply requested Reply?
when you press the left softkey at the end of the
message. Press the left softkey again to reply. If
you do not want to reply, press the right softkey.
Note!
To delete a template you have created, highlight the
template you want toNdelete, and press C. You will be
asked to confirm deletion of the template. Press the left
54
Text Messaging
Saving Messages to Read Later
Deleting Messages
Press the right softkey when you see the question
New message Read now?
There are two ways to delete a message:
The message is saved in the phone and an envelope icon
appears at the top of the display. If you want to read the
message, you can retrieve it from the Received mail
menu.
• Select Delete in the list of options and press
Select.
• In the Received Mail menu, scroll to a message
e
and press the C key.
s
•
•
indicates an unread message.
Replying to Messages U
l
indicates that the message is locked.
a
1
2
•
In the Options menu, Select Reply and press Select.
i
enterea new message
Select the way you want to reply to the message:
c
r
•
•
indicates that the message is marked as Urgent.
include the message you want to reply to and enter
• m
•
No icon indicates that the message has already
been read.
ma reply
use a template and enter a reply and press Select.
o
List of Options
If you select a message, you can see a list of optCions:
3
Enter your reply and press Select to send the
message.
r
Reply, Delete, Chat, Read Next (if applicable), Lock,
fo
Forward Msg., and Call (if applicable).
t
o
Forwarding Messages
1
2
3
Select Forward in the list of options, press Select.
You can now edit the message. Press OK.
Enter the recipient’s phone number, or tilt the joystick
to the left to retrieve the number from the phonebook
or the call list. Press Select to send.
N
Text Messaging
55
Calling the Message Sender
Starting a Chat Session
Select Call in the list of options and press Select.
1
2
Messages, Select, SMS, Select, Chat, Select.
Enter the recipient’s phone number or tilt the joystick
left to select a contact.
To call a phone number found in a message,
press Select when the number is highlighted
and then press Select again.
Note!
3
Write your message, Send.
Note!
The Chat icon (
standby screen when you are in an active Chat
) will appear on your
s
e
SMS Chat
SMS Chat works in the same way as Chat on the Internet.
You can initiate a Chat session or you may be invited to
participate in a Chat session.
U
session.l
a
i
Receiving a Chat Session Invitation
When yocu receive a Chat session invitation, the phone
r
appears.
This feature is operator dependent.
Note!
e
beeps and the message Chat Message, Chat Now?
m
•
Before Chatting
Before you participate in a Chat session, you may want to
change your nickname from the default.
m
To read the Chat message, press Yes.
o
•
•
•
To reply, press Yes.
C
1
Messages, Select, SMS, Select, Options, Select,
To suspend a Chat session, press No.
r
Nickname, Select.
To resume a Chat session, scroll to Messages, Select,
fo
Press and hold C to deletetyour default nickname.
Enter your new nickname. For information on
o
SMS, Select, Chat, Select, Resume.
2
3
•
•
To end a Chat session, scroll to Messages, Select,
SMS, Select, Chat, Select, End (phone number).
entering letters and symbols, see “Inputting Text” on
N
page 63.
To reject a Chat message, press No. The rejected Chat
message is saved in Inbox in the Messages menu.
56
Text Messaging
•
•
If you receive a new Chat message while another Chat
session is ongoing, press Yes to end the ongoing
session and start the new one.
Add a nickname to your Chat messages (and
SMS messages). Scroll to Messages, Select,
SMS, Select, Options, Select, Nickname, store a
nickname that will appear with every Chat message
you send.
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
Text Messaging
57
Using Voice Commands
With your phone, you can:
Recording Voice Tags
1
Scroll to Settings, Select, Voice Control, Select,
VoiceCommand, Select, Contacts, Select, Add
Voice Tag, OK.
•
•
•
•
voice dial - call someone by saying the name and
number type
answer and reject calls with your voice when using a
handsfree kit
2
3
Select a contact and press Select.
e
Follow the instructions in the display.
s
record or listen to voice memos by using voice
commands
U
whicah have a voice command.
Note!
An iconl(
i
) appears next to the contact names
activate the voice control by saying a “magic word”
c
r
You can save up to 10 voice commands (such as call,
busy, or answer) and 18 voice tags (names). When
recording voice commands, make sure you are in a quiet
EditingVoice Tags
e
1
m
2
You can edit Voice Tags for each phonebook entry by
choosing Phonebook, Select, Edit Contact.
Choose a contact using your joystick or side volume
key, then press Edit, Select, Edit Voice Tags.
Instructions appear. Press Yes.
environment. See “Tips” on page 62.
m
o
C
Before Voice Dialing
Before you can start voice dialing, you need to turn on the
voice dialing function and record your voice commands.
3
4
r
Lift the phone to your ear, wait for the tone and say
the number type that you want to record. The voice
command is played back to you.
Press Yes to save the voice command. If the recording
is not OK, press No and repeat step 5.
fo
t
o
Turning Voice Dialing On
1
5
Scroll to SettingsN
, Select, Voice Control, Select,
VoiceSettings, Select, Voice Dialing, Select,
You must record a voice tag for each contact you want the
phone to recognize during voice dial.
2
Select On and press Select.
58
Using Voice Commands
Recording Number Types
From standby, you can also initiate voice dialing and
voice control of voice memos by:
1
2
3
Scroll to Settings, Select, Voice Control, Select,
VoiceCommand, Select, Voice Dialing, Select.
Scroll to Home, Work, Mobile, or Other and press
Select.
•
pressing and holding either the upper or lower side
volume key.
•
•
•
pressing and holding the joystick.
pressing and holding the left soeftkey.
You will be prompted to record the number type.
Voice Dialing
s
pressing and holding the handsfree button (when using
U
saying the Magic Word. See “Magic Word” on
a portable handsfree or a Bluetooth™ headset).
Voice Activated Dialing
l
•
a
i
1
From standby, press and hold either the upper or lower
page 61.
side volume key until you hear a tone.
c
r
2
Release the upper or lower side volume key, lift the
phone to your ear and say a name, for example “John”
after the tone. The name is played back to you.
e
Voice Answering
You can answer or reject incoming calls by using your
m
voice when using a portable handsfree or car handsfree
accessory.
m
3
If you have saved several numbers for that contact.
o
After a second tone, say a number type that you have
recorded earlier, for example “home”. The number
C
1
Scroll to Settings, Select, Voice Control, Select,
VoiceSettings, Select, Voice Answer, Select.
Check or uncheck the accessories you want to be able
to use with voice answering by pressing the center
push key or by pressing the left softkey.
Press Yes to exit.
r
type is played back to you, and the call is connected.
fo
2
t
Only the number types available for that
Note!
o
contact are playNed to you. Fax number types are
not available for voice dialing.
3
4
Follow the prompts.
Using Voice Commands
59
5
6
Lift the phone to your ear, wait for the tone and say a
word such as “Answer” and press Yes. If the
recording was not OK, press the right softkey and
repeat step 4.
Say “Busy”, or another word. Press Yes to save your
recordings.
2
3
4
Select On and press Select.
Instructions appear. Press OK.
Lift the phone to your ear, wait for the tone and say
“Record”.
Say “Play” and press Yes to save your recordings.
5
Starting a Voice Memo Recording
e
Answering Incoming Calls
When the phone rings, say “Answer”.
1
From standby, press and hold either the upper or lower
s
side volume key until you hear a tone.
U
2
Release the upper or lower side volume key, lift the
phone to your ear and say “Record”. The voice
command is played back to you and a tone indicates
that the recording has begun.
l
a
You can use any word to “tell” your phone to
Note!
i
pick up an incoming call.
c
r
e
Rejecting Incoming Calls
When the phone rings, say “Busy”. The ringer will be
3
mTo end the recording, press Select.
muted. Your phone will go through the normal ring cycle Listening to Voice Memo Recordings
m
o
1
From standby, do one of the following until you hear a
(although silent) and then the call will go toCvoicemail (if
enabled).
tone:
r
•
•
•
•
2
Press and hold the left softkey
Recording Voice Memos
fo
Press and hold the joystick
t
You can record voice comomands (totalling approximately
Press and hold the upper or lower side volume key
Press and hold the portable handsfree button
120 seconds), start a Nvoice memo recording, or listen to
voice memos.
Release the key, lift the phone to your ear and say
“Play”. The voice command is played back to you.
1
Scroll to Settings, Select, Voice Control, Select,
VoiceSettings, Select, Voice Memo, Select.
60
Using Voice Commands
3
Listen to your last voice memo recording. Press the
right softkey to stop.
Using Magic Word can substantially reduce
standby and talk time.
Note!
To play all of your memos, scroll to the Extras
menu, Select, Voice Memo, Select, and
choose the voice memo you want to hear from
the Memo List.
Note!
1
2
Scroll to Settings, Select, Voice Control, Select,
VoiceSettings, Select, Magic Word, Select.
Select the accessories you want to be able to use with
the Magic Word by pressing the center push key or by
e
s
pressing the left softkeUy.
Magic Word
3
4
5
6
Press Exit.
Press Yes to save. l
You can record a Magic Word that will activate voice
recognition. You can use it as a voice command to allow
totally handsfree access to voice control. Instead of
pressing and holding the upper or lower side volume key,
you say the Magic Word and then one of your recorded
voice commands. The Magic Word is especially suitable
a
i
Follow the prompts.
c
Lift the phone to your ear, wait for the tone, and say
r
the Magic Word.
e
Turn off the Magic Word when you no longer need totally
handsfree access, in order to save battery power.
m
m
when driving a car with a car handsfree kit installed,o
because you use external power instead of the battery
power of your phone. You can also use the Magic Word
when the phone is connected to a portable hrandsfree.
Editing Your Voice Commands
C
Use the VoiceCommands submenu to keep your voice
commands up to date by re-recording them or deleting the
ones you do not use.
fo
be distinguished from ordinary background
t
Choose a long, unusoual word which can easily
speech (such asN“abracadabra”).
Note!
Re-recording Commands
1
Scroll to Settings, Select, Voice Control, Select,
VoiceCommand, Select.
2
Select the type of voice command and press Select.
Using Voice Commands
61
3
4
Select a voice command then choose an entry.
Select Replace Voice and press Select.
To listen to a recorded voice command, select
Play Voice.
Lift the phone to your ear, wait for the tone and say
the command.
•
•
•
Shorter tags may cause a lower recognition rate. For
example, the name “Tom” can easily be confused with
“Tim”.
Record your voice using the same tone and inflection
as you would when normally speaking. Try not to
overpronounce or speak too slowly when recording.
5
You can also edit the voice command for a contact name
in Edit Contact in the Phonebook menu.
e
When using Portable handsfree devices, you can easily
s
activate voice dialing by pressing the button near the
U
microphone until you hear a prompt.
Tips
•
l
a
i
Try to record in an area where there is little or no
background noise or other people speaking.
Troubleshooting
If your phone cannot detect speech, one of the following
c
r
•
Try to record your voice with the same equipment that
you normally use with your phone. For example, if you
e
might have happened:
mYou spoke too softly – try speaking more loudly.
•
normally have your phone connected to a portable
handsfree device when using voice commands, remcord
your voice commands when your phone is attached to
•
•
•
•
You held the phone too far away – hold it as you do
during a call.
o
C
If you plan to use voice functions handheld mode, hold
a portable handsfree device.
r
The voice command was too short – it should be
around one second long.
•
fo
the phone up to the ear in the position that would
t
You spoke too late or too soon – speak immediately
after the tone.
normally be used on a call.
o
N
Keep in mind that longer tags provide a higher
recognition rate.
•
•
Begin speaking after the tone ends.
You may want to re-record the voice command.
62
Using Voice Commands
Inputting Text
You can enter letters, for example, when you add names
to the phonebook, write text messages, or enter WAP
addresses.
Before you start entering letters, you need to select the
input languages that you want to use when writing. The
available input methods are:
Apart from the way you normally enter letters in your
phone, using multitap text input, you can use
T9 Text Input for entering text messages and email, for
example, if the input language you select supports this.
T9 Text Input is a predictive input method and is a
quicker way to write texts.
•
•
Multitap
e
T9 Text Input
s
U
Multitap Text Input
l
When saving names in the phonebook or when writing
a
i
input. You rpress each key as many times as needed to
show thee letter you want.
WAP addresses, you enter letters using multitap text
c
You can toggle between Multitap and T9 while
in a text field by pressing then choosing an
input method.
Note!
Inmthe following example, we are going to write a name:
m
1
2
Scroll to Phonebook, Select, Add Contact, Select.
Press Select again.
Press the appropriate key, 1-9, 0, or # repeatedly until
the character you want appears in the display. See the
table of the Latin alphabet below: For example:
To enter an ‘A’, press 2 once.
o
You will only see text input options if you are in
Note!
C
T9 mode. You can get in T9 mode by choosing
r
Settings, Select, Languagef, Soelect, T9
o
Predictive, Select, On. t
N
•
•
•
To enter a ‘B’, quickly press 2 twice.
To shift between capital and lowercase letters,
press
, then enter the letter.
Inputting Text
63
T9 Text Input
You can use T9 Text Input when entering texts such as
text messages. The T9 Text Input method uses a built-in
dictionary to recognize the most commonly used word for
every sequence of key presses. This way, you press each
key only once, even if the letter you want is not the first
Press
for
1
2
3
4
5
6
7
8
9
0
space. @ ? ! - , & : ’ ¡ ¿ 1
a b c 2 à á â ã ç
d e f 3 è é ê ë
g h i 4 í î ï
letter on the key.
When you press the keys, sdifferent words are suggested.
e
U
If the word you wlant is not suggested, you can edit the
j k l 5
word. The word is then added to the dictionary so that it
a
i
m n o 6 ñ ó ô õ
p q r s 7
is suggescted the next time you use T9 Text Input.
r
In the following example, we will start writing a text
meessage:
t u v 8 ù ú û ü
w x y z 9
m
1
Scroll to Messages, Select, SMS, Select, Send New,
Select, scroll to Message Type, Select, enter phone
number, OK.
m
o
+ − = ∗ /< > 0
C
2
For example, if you want to write the word “How”,
press 4 then 6 then 9.
to shift between capital and lowercase
letters
r
fo
The word “How” appears.
# @ ↵ & ~ %t$ ^
o
3
•
If the word shown is the one you want:
press 1 to accept and add a space.
(To accept a word without adding a space, tilt the
joystick to the right.)
N
to delete letters and numbers
C
digit keys
press and hold to enter numbers
64
Inputting Text
If the word shown is not the one you want:
the text you are writing, scroll to a language and press
Yes.
•
press 0 repeatedly to view alternative words
(candidates). Accept a word and add a space by
pressing 1.
•
Input Method
A list of input methods is shown. If you want to change
the input method for the text you are writing, scroll to
an input method and press Yes.
If you do not find the word you want by pressing 0:
•
Press , scroll to Edit Word, Yes, write the new word
using multitap text input, OK.
e
•
•
•
Edit Word – for T9 Text Input only
s
Edit the suggested word by using multitap text input.
U
Accept Word – for T9 Text Input only
l
Note!
Press
to enter a full stop. Accept by
a
i
Accept the suggested word and add a space.
1
pressing
. Press and hold
to select an
c
Candidates – for T9 Text Input only
A list of alternative words is shown. Scroll to a word
r
input method.
e
and press Select.
m
Press * to toggle between capital and lowercase
letters.
Note!
•
m
Help
o
Turning Off the T9 Text Input
Options (available by pressing
•
)
C
If you wish, you can turn off the T9 Text Input. This
setting is valid for all input of texts – not only for the text
you are currently entering.
r
Symbols
Symbols and punctuation marks are shown. Move
fo
between the symbols by using the arrow keys. Press
t
Yes to select a symbol.N
o
1
Scroll to Settings, Select, Language, Select,
T9 Predictive, Select.
Select On or Off.
•
Language
2
A list of the input languages that you selected earlier is
shown. If you want to change the input language for
Inputting Text
65
Using the Calendar
You can use the calendar to keep track of important
meetings that you need to attend, phone calls that you
need to make or tasks that you need to do.
You can fill in different types of information about the
appointments or task.
Adding Appointments
For calendar synchronization software, visit
about calendar synchronozation, see
“Synchronizing Your Phone and PC” on
page 68
1
Scroll to Extras, Select, Calendar, Select, Add
Note!
e
Apptmt., Select.
Choose the type of event or appointment and
s
2
U
press OK.
l
a
3
4
Press Edit and enter a subject.
i
Scroll to Location, press Edit, enter a location, and
c
r
so on.
e
Appointments and Tasks
You can save many appointments and tasks in your
calendar. You can choose to add a new appointment or
•
5
m
6
Once you have entered the type of appointment and
location, scroll to Proceed? and press Edit.
Press Edit and enter a start date. Scroll to Time, press
Select, enter a start time, and so on.
m
task, or use an old appointment or task as a template by
o
copying and editing it.
C
7
8
Scroll to Proceed? and press Edit.
Select the reminder interval you want, for example
5 min before, and press OK.
•
•
Appointments: meetings, dates, travel, vacation,
phone calls, etc.
r
fo
Tasks: make a phone call, send a message, pay bills,
t
You now have the following options:
etc.
o
•
•
Save and Close - Select to save and exit.
N
Use the # key, press the upper or lower side
volume key, or tilt the joystick up or down to
toggle am/pm.
Note!
Recurrent App. - Select if the appointment is
recurrent.
66
Using the Calendar
•
Class - Select if you wish to set the appointment as
public or private.
•
View Today. This shows all the appointments for the
current day and the Tasks that have not been
completed. An icon appears next to those
appointments that cover the whole day.
Adding New Tasks
1
Scroll to Extras, Select, Calendar, Select, Add Task,
Select.
•
•
View All Tasks. This shows all your entered Tasks.
Scroll to the task you want to view and press Select.
2
Choose a task and press OK.
If you choose phone call, enter a number and press
OK.
If you choose message, select a type of message and
press OK.
If you choose miscellaneous, select a type and press
OK.
e
View Month. This shows a whole month, with the
current day in a square.UMove within and among the
s
weeks by using the ljoystick. Press Select to enter a
certain day. Days on which you have appointments are
a
i
marked in bold.
c
r
•
View Week. This shows a whole week. All your
appoeintments and Tasks are shown as grey boxes. You
enter a certain day by pressing Select when that day is
3
Press Edit and enter a subject. Scroll to Descr., press
Edit and enter a description.
m
highlighted.
m
4
5
Scroll to Proceed? and press Edit.
o
If you want to set a reminder, scroll to Set reminder
C
and press Ok. Enter a reminder date andrpress Ok.
Editing
A list of options appears. Confirmfwoith Save And
6
You may wish to edit an appointment or a task, for
example, by changing the date or location.
Close, Select.
t
To view your calendar coNntent, scroll to Extras, Select,
o
Viewing Your Calendar
Calendar, Select and then select one of the following:
Using the Calendar
67
Editing or Deleting Appointments
Calendar Settings
1
In the calendar, scroll to the day of the appointment
you want to edit and press Select.
To view your calendar options, scroll to Extras, Select,
Calendar, Select, Options, Select, and then select one
of the following:
You can quickly delete the entry by pressing C.
Delete? appears, press Select.
Note!
•
Status. Use this to check when you last synchronized
your calendar, how much sepace is left for new
private calendar enUtries, only the public ones, or both.
appointments and Tasks.
Class View. You can chsoose whether to see only the
2
3
4
Press
to Edit, Delete, Reschedule, or Copy.
Choose Edit and press Select.
Proceed as described in “Adding Appointments” on
page 66.
When you have finished, scroll to Save And Close,
Select.
•
•
•
l
a
Delete all. Deletes all appointments and Tasks in the
i
5
c
calerndar.
e
Reminders. You can choose to be reminded of
calendar events Always or If Power On.
m
Editing or Deleting Tasks
•
Profile Switch. You can change profiles when you are,
for example, in a meeting.
Scroll to Extras, Select, Calendar, Select, Viewmall
C
1
o
tasks, Select.
Choose a task.
2
3
r
Synchronizing Your Phone and PC
Press to view the list of options. Options include:
To enhance use of your Calendar features, you may want
to purchase XTNDConnect PC or download a free
abbreviated version of XTNDConnect PC (does not
include email capabilities). XTNDConnect PC is a
software application that allows you to synchronize your
contacts, calendar, and tasks between your mobile phone
and popular PC applications on your computer.
Mark “Done”, Edit, Delete, Co
f
py, and Call.
o
t
When you have finished, scroll to Save And Close,
o
Select.
N
68
Using the Calendar
To use your mobile phone with the XTNDConnect PC
program, you will need the following:
•
•
•
A functional serial port on your computer
Microsoft Windows 95/98 SE/Me/NT4/2000
A serial interface cable (RS232 Cable DRS-11) (sold
seperately)
e
s
•
•
Mobile Phone Monitor (a software interface between
your mobile phone and the XTNDConnect PC
software)
U
l
a
i
Purchase XTNDConnect PC (http://
c
r
free version of XTNDConnect PC for Sony Ericsson or
Ericsson phones only (www.SonyEricsson.com).
e
m
m
o
C
r
fo
t
o
N
Using the Calendar
69
Troubleshooting
Error Messages
Battery low
Recharge or replace the battery.
My phone
does not
turn On.
The battery power is low. When the
phone shuts itself off, replace the
battery with a fully charged one, or
My phone
Check for Ringer Off ( ) or Silent
Mode ( ) icons on the standby
screen.
use an alternate power source, such
e
does not ring
when a call
is received.
s
asUa travel charger.
lYour text message memory is full.
Erase some stored messages before
you can receive more messages.
No memory
a
Delete
i
This is a common occurrence.
Transmitters are set in geographic
areas, and coverage is not 100% all
My signal
strength
varies.
c
r
e
m
Accessibility and Internet
of the time. Signal strength variems
as you travel between cells. o
Technical Assistance/Customer Service
•
•
•
•
United States - 1-800-374-2776
Latin America - +1-305-755-6789
Canada - +1-800-668-2101
C
Reduce the volume of your speaker
Speech
sounds
garbled or
distorted.
r
by pressing the lower side volume
key until the speech sounds clearer.
fo
t
Other countries - +1-919-472-7908
o
N
70
Troubleshooting
Accessible Solutions/Special Needs
For information on Accessible Solutions for individuals
with special needs call the Sony Ericsson Special Needs
Center at 877-878-1996 (TTY) or 877-207-2056 (voice),
or visit the Ericsson Special Needs Center at:
e
Internet
s
Visit Sony Ericsson on the internet at:
U
l
a
i
Mobile Internet
c
r
Visit the Sony Ericsson Mobile Internet at:
synchronization software, customer services, user’s
e
m
m
guides, and other useful information.
o
C
r
fo
t
o
N
Troubleshooting
71
Index
Customer Service 70
A
C
Accessing Menus 20
Alarm Clock 38
Analog Indicator 10
Appointments 66
Assistance 70
Auto
Calendar
D
Adding Appointments 66
Adding Tasks 67
Editing 67
Settings 68
Using 66
Digital Indicator 10
e
s
E
U
lEarpiece Volume 19
a
Error 70
i
c
Area Code 32
Keylock 35
Prefix 32
Viewing 67
Error Message 70
Low Battery 70
No Memory 70
Extras Menu 38
r
Call Info Menu 25
Call List 25
e
m
Call Timers 26
m
CallingoCards 22
B
Battery
C
Calls
I
r
Attaching 14
First-time Use 17
Making 18
Receiving 18
Restrict 32
Icons 10
fo
Call List 25
Standby Screen 10
Internet 34, 42, 71
t
o
N
Charging 14, 17, 18
Chat 56
Contacts 46
72
Index
Muting Microphone 19
My Shortcuts Menu 43
Problem
Low Battery Power 70
K
Keys 11, 12, 13
Speech Sounds Garbled. 70
Varying Signal Strength 70
Will Not Power On 70
M
O
Magic Word 61
Making
Calling Card Calls 22
Calls 18
Menu
Ongoing Call Menu 27
Options Key 11
Will Not Ring 70
e
Profiles 3s0
Rl
U
i Receiving Calls 18
P
Pause
Dialing 44
Phone Silent 28
Phone Views 9
a
Call Info 25
Extras 38
c
r
Restrict Calls 32
e
Messages 24
My Shortcuts 43
Ongoing Call 27
Phonebook 21
Settings 28
m
S
m
Adding Contacts 44
C
Phonebook
Settings Menu 28
SMS
o
rCalling Contacts 46
Chat 56
Editing Messages 52
Message Types 52
Receiving 54
Sending 52
Editing 47
fo
Menus
t
Menu 21
Accessing 20
Using 20
o
Using 44
Pictures 39
N
Messages Menu 24
Missed Calls 25
Templates 53
Index
73
Softkeys 11
TTY 10, 40
Sort Order 46
Sounds 28
Special Needs 71
Speed Dialing 46
Stop
Character 44
Dialing 44
Super Speed Dialing 46
Synchronizing
Calendar 68
TTY Phone Number 71
V
Vibrating Alert 28
Voice
e
Answering 59
Dialing 58, 59
Memos 60
s
U
l
a
i
Voice Memo 38
c
r
e
W
Phonebook 49
m
Web site 4m2
C
T
o
Tasks 67
r
Technical Assistance 70
Text Input
Multitap 63
fo
t
o
Options 65
T9 64
N
Timer 39
74
Index
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
76
Index
T61LX Quick Card
No service is available.
You have a new message. The
number next to the envelope
indicates how many messages
you have.
Your phone is in Analog mode.
Your phone is in Digital mode.
Magic Word is active.
You have missed a call.
Meeting profile is active.
Car profile is active.
Indicates an incoming call in
Call list.
e
s
Indicates an outgoing call in
Call list.
Auto Keylock is active. Unloack
U
Home profile is active.
l
i
followed by
Work profile is active.
cC
by pressing
and the left softkey.
r
e
Outdoors profile is active.
Portable profile is active.
Ringer is off. Turn On by
.m
Call screening is activated.
pressing
m
Silent mode is On.
o
Shows current battery status.
C
r
Shows current signal strength. fo
Alarm is set.
t
o
N
Emergency Calls
Enter your local emergency number
and press the left softkey.
Turn Phone On/Off
Press and hold the power key.
Call Number Shown in Display
Enter the Menus
Press the left softkey.
Tilt the joystick left or right or press
Menu.
Change Ear Volume (During Call)
Press upper or lower side key
Select a Menu or Save a Setting
e
Microphone Mute (During Call)
Press left softkey.
s
Press and hold C.
U
Cancel Action or Move Back in Menus
Auto Keylock
l
Press right softkey.
Press and hold , then select Lock
a
Keypad or Unlock Keypaid.
r
Speed Dial
c
Enter position number (2-9) and press Call.
Silent Mode
Press , select Turn on Silent.
e
Redial Last Dialed Number
m
Press left softkey from standby
Website
m
C
Technical Support
Answer Call
o
Press the left softkey.
End Call
r
North America - 1-800-374-2776
Press the right softkey.
Call Voicemail
Press and hold 1.
Latin America - 1-305-755-6789
Canada - 1-800-668-2101
Other Countries - +1-919-472-7908
fo
t
o
N
You can quickly access several commonly used menus by tilting the joystick left or right. The menus are organized in a circle.
Quickly access menus and settings using the numbers that appear next to each menu and setting. For example, access your
Calendar by pressing left or right then 3 to access the Call Info menu. Then press 2 to access the Call list submenu.
e
s
U
l
a
i
c
1.Call Contact 1.Call
1.Missed Calls
2.Call List
3.Usage Tracker 3.Call Options
1.Sounds & Alerts 1.Voice Memo Edit shortcuts
r
Voicemail
2.Add Contact
3.Edit Contact
4.My Numbers
5.Groups
2.Profiles
2.Calendar
e
2.SMS
3.Options
3.Time
4.Games
m
4.Options
4.Display
m
5.Language
5.Calculator
6.Time and Date 6.Code Memo
o
1.Turn off
Tones *
6.Calling Cards
7.Options
8.Memory
Status
C
7.Locks
8.Voice Control
9.Networks
7.Headset Jack
8. Accessories
r
2.Hold call *
3.Switch calls *
fo
t
4.Release active *
5.Retrieve Call *
0.Reset settings
o
N
* Depending on whether a call is
ongoing or not, either the Call
info or the Ongoing call menu is
shown.
|
