* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
SAMSUNG ELECTRONICS
Printed in Korea
Code No.:GH68-07155A
English. 05/2005. Rev. 1.0
World Wide Web
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Important
safety
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
precautions
Switch off the phone near all medical
equipment
Failure to comply with the following
precautions may be dangerous or illegal.
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Only qualified service personnel may repair your
phone.
Emergency call
For more detailed safety information, see "Health and
safety information" on page 60.
Key in the emergency number for your present
location, then press
.
1
About this Guide
•
Simple, compact design with Intenna
Samsung’s powerful intenna technology allows
the best call quality without an annoying
external antenna.
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to
“Get started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Special
features of your phone
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
•
Camera
Use the camera module on your
phone to take a photo.
Indicates that you can get more
information on the referenced page.
ꢀ
→
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
•
WAP browser
Access the wireless web and
access various services and up-
to-the-minute information.
[
]
Indicates a key on the phone. For
example, [ ]
<
>
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Menu
>
2
•
Voice clarity
•
•
Calendar and To do list
Keep track of your daily and
monthly schedules and tasks.
Use the voice clarity feature to increase the
volume and clarity of an incoming call, even in
the midst of a crowd.
Voice recorder
Record memos or sounds.
•
Phonebook
Store up to 1000 contact
numbers.
•
•
Java
•
Get personal with photo
caller ID
See who’s calling you when their
very own photo displays.
Enjoy Java™-based embedded
games and download new
games.
Timer and stopwatch
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, and sounds.
Count down to a specific event
or measure the time it takes to
do your exercise or work.
3
Use Phonebook .................................................... 15
Send messages.................................................... 15
View messages .................................................... 16
Manage schedule.................................................. 17
Contents
Unpack
6
6
7
Enter text
18
20
25
Make sure you have each item
Your phone
ABC, Arabic, T9, Number, and Symbol mode
Call functions
Buttons, features, and locations
Get started
Advanced calling features
Menu functions
First steps to operate your phone
All menu options listed
Solve problems
Install and charge the phone ................................... 7
Power on or off...................................................... 8
Keys and display.................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/answer calls................................................ 13
58
60
67
Health and safety information
Index
Step outside the phone
14
Begin with your camera, WAP, messages, and other special
features
Use camera......................................................... 14
Browse WAP........................................................ 14
4
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
Press <Phonebook> in Idle mode.
1 SIM-AT*
2
ꢀ
p.28
Sound settings
Organiser
1 Phonebook
ꢀp.25
1 Find name
2 Add entry
3 Speed-dial list
4 Copy all to phone
5 Delete all
ꢀp.25
ꢀp.26
ꢀp.27
ꢀp.27
ꢀp.27
8 Conversion
9 Timer
10 Stopwatch
ꢀp.50
ꢀp.50
ꢀp.51
7 Quiet mode
8 Alerts on call
ꢀp.34
ꢀp.34
2 Call records
ꢀp.29
5 Messages
ꢀp.34
1 Missed calls
2 Received calls
3 Dialled calls
4 Delete all
5 Call time
6 Call costs*
ꢀp.29
ꢀp.29
ꢀp.29
ꢀp.29
ꢀp.29
ꢀp.30
8 Camera
ꢀp.51
1 Short messages
2 Multimedia messages ꢀp.36
3 Push messages
4 Preset messages
5 Voice mail
6 Answering machine
7 Broadcast
ꢀp.34
1 Take photos
2 My photos
3 My albums
4 Delete all
5 Settings
6 Memory status
ꢀp.51
ꢀp.53
ꢀp.54
ꢀp.54
ꢀp.54
ꢀp.54
2 Management
ꢀp.28
ꢀp.38
ꢀp.39
ꢀp.39
ꢀp.39
ꢀp.40
ꢀp.40
ꢀp.42
1 Own number
2 Group setting
3 Memory status
ꢀp.28
ꢀp.28
ꢀp.28
3 Network services
ꢀp.30
3 Services
ꢀp.28
1 Call diverting
2 Call barring
3 Call waiting
4 Network selection
5 Caller ID
6 Band selection
7 Active line*
ꢀp.30
ꢀp.31
ꢀp.31
ꢀp.32
ꢀp.32
ꢀp.32
ꢀp.32
8 Settings
9 Memory status
9 Phone settings
ꢀp.55
1 Service directory
ꢀp.28
1 Display
2 Greeting message
3 Language
ꢀp.55
ꢀp.55
ꢀp.55
ꢀp.56
ꢀp.57
ꢀp.57
ꢀp.57
ꢀp.57
ꢀp.57
ꢀp.58
ꢀp.58
6 Fun box
ꢀp.42
1 WWW Services
2 Media box
3 JAVA world
ꢀp.42
ꢀp.44
ꢀp.45
4 Security
5 Auto redial
6 Voiceclarity
7 Active folder
8 Side key
9 Any key answer
10 Date system
11 Reset settings
4 Sound settings
ꢀp.33
7 Organiser
ꢀp.46
1 Incoming calls
2 Messages
3 Power on/off
4 Connection tone
5 Key tone
ꢀp.33
ꢀp.33
ꢀp.33
ꢀp.33
ꢀp.33
ꢀp.34
1 New memo
2 Calendar
3 To do list
4 Clock
5 Alarm
6 Voice recorder
7 Calculator
ꢀp.46
ꢀp.47
ꢀp.48
ꢀp.48
ꢀp.48
ꢀp.49
ꢀp.50
6 Minute minder
*Shows only if supported by your SIM
card.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Display
Camera lens
Phone
Travel adapter
Navigation keys
(Up/Down/Left/
Right)
Camera
Key
WAP access key
Right soft key
Mirror
Headset jack
Left soft key
Battery
User’s manual
Power on/off/
Menu exit key
Service
LED
Volume keys
Dial key
You can obtain various accessories from
your local Samsung dealer.
Cancel/Correct
key
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
Alphanumeric
keys
Microphone
Special
function keys
6
Get started
First steps to operate your phone
Install the battery.
Plug the travel adapter
into the phone.
3
4
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Plug the adapter into a standard AC wall outlet.
Remove the battery.
Insert the SIM card.
5
6
1
2
When the phone is completely charged (the
battery icon stops blinking), unplug the adapter
from the power outlet.
Make sure that the gold-
coloured contacts on the
card face down into the
phone.
If the phone is already
on, first turn it off by
holding [
].
7
Get started
Power on or off
Remove the adapter from the phone.
7
Power on
1. Open the phone.
2. Press and hold [
on the phone.
] to turn
Do not turn on
the phone when
mobile phone
3. If necessary, enter the PIN and
press <OK>.
use is prohibited.
Low battery indicator
When the battery is low:
Power off
1. Open the phone.
•
•
•
a warning tone sounds,
the battery low message displays, and
2. Press and hold [
].
the empty battery icon [
] blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
Keys and display
Key(s)
Description
Key(s)
Description
End a call.
Hold down to switch the phone on and off.
In Menu mode, cancels input and returns the
phone to Idle mode.
Perform the function indicated on the bottom
line of the display.
In Idle mode, access the following menus
respectively.
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access your
•
•
•
•
Up: Camera
Down: Calendar
Left: Create in Short messages
Right: Incoming calls
voicemail.
Enter special characters.
In Idle mode, hold
[
]
down to activate or
In Menu mode, scroll through the menu
options.
deactivate Quiet mode.
Adjusts the phone volume.
In Idle mode, adjusts the keypad tone
volume.
In Idle mode, launches the Wireless
Application Protocol (WAP) browser.
(on the left)
Sends or answers a call.
In Idle mode, retrieves the last number
dialled, missed, or received.
In Idle mode, hold down to turn on the
camera.
In Camera mode, takes a photo.
Deletes characters from the display.
In Menu mode, returns to the previous menu
level.
(on the right)
In Idle mode, hold down to make a new
memo.
9
Get started
Display
Layout
Alarm set
Icons
(continued)
The display has the three areas.
Call diverting feature is active
ꢀp. 30
Icons
displays various icons.
GPRS network
Home zone, if you have registered
for the appropriate service
Text and graphics
displays messages,
instructions, and
information you enter.
Office zone, if you have registered
for the appropriate service
Soft key function
Menu Phonebook
indicators
Quiet mode is activeꢀp. 12
shows the current
functions assigned to the
two soft keys.
Call ringer set to vibrateꢀp. 33
Battery power level
Received signal strength
Call in progress
Icons
Out of your service area; you
cannot send or receive calls
New text message
New voicemail message
New multimedia message
10
Access menu functions
Select an
option
1. Press the appropriate soft key.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
2. Press the Navigation keys to
move to the next or previous
option.
display indicates their current role.
3. Press <Select> to confirm the
function displayed or option
highlighted.
Menu
Phonebook
4. To exit, choose either of the
following methods:
•
Press < > or [
up one level.
C] to move
•
Press [
mode.
] to return to Idle
Press the left soft
key to access
Menu mode.
Press the right soft
key to access the
Phonebook menu.
Use shortcuts Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
3. Scroll to an image and press
View>.
<
1. In Idle mode, press <Menu
and select Phone settings
Language
>
→
Display
language
4. Scroll to the image you want.
→
Text language.
5. Press <Select>.
2. Select a language.
You can change the colour for the
display components, such as title
bars and highlight bars.
Menu mode
Skin colour
1. In Idle mode, press <Menu
>
→
Call ringer
melody
and select Sound settings
Incoming calls
.
1. In Idle mode press <Menu
and select Phone settings
Display Skin
2. Select a colour pattern.
>
→
2. Select a sound category.
3. Select a ringer melody.
→
.
You can set a wallpaper for the idle
screen.
Idle mode
wallpaper
You can switch the phone to Quiet
mode to avoid disturbing other
people with your phone sounds.
Quiet mode
1. In Idle mode, press <Menu
>
→
and select Phone settings
Press and hold [ ] in Idle mode.
Display
→
Wallpaper
.
2. Select a image category.
12
Make/answer calls
You can protect the phone against
unauthorised use with a phone
password.
Phone lock
1. Enter an area code and phone
Make a call
number.
1. In Idle mode, press <Menu
>
→
2. Press [ ].
and select Phone settings
3. To end the call, press [
].
Security
password
2. Enter the default password,
→
Change
.
1. When the phone is ringing,
press [ ].
Answer a call
“00000000” and press <OK>.
2. To end the call, press [
].
3. Enter a new 4- to 8- digit
password and press <OK>.
Press [ / ].
Adjust the
volume during
a call
4. Enter the new password again
and press <OK>.
5. Select Phone lock
6. Select Enable
7. Enter the password and press
OK>.
.
.
<
13
Browse WAP
Step outside the phone
Using a built-in WAP (Wireless Access Protocol)
browser, you can get easy access to the wireless web
to receive a variety of latest services and information
and to enjoy download of web contents.
Begin with your camera, WAP, messages, and other
special features
Use camera
In Idle mode, press [ ].
1. Open the phone.
Launch the
browser
Take a photo
2. In Idle mode, press and hold
[
] to turn on the camera.
3. Aim the lens at the subject and
adjust the image.
•
To scroll through browser items,
press [Up] or [Down].
Navigate the
web
4. Press [ ] to take a photo. The
photo is saved automatically.
•
•
To select an item, press < >.
To return to the previous page,
press [C].
5. Press [C] to take another
photo.
•
•
To access the browser menus,
press <Menu> and select
1. In Idle mode, press [Up].
2. Select My photos
Browser Menu
.
View a photo
.
To access the WAP page
options, press [ ].
3. Scroll to the photo you want.
4. Press <View>.
14
Use Phonebook
1. In Idle mode, press
Phonebook> and select Find
name
Find an entry
<
To the phone’s memory
Add an entry
.
1. In Idle mode, enter a phone
2. Select an entry.
number and press <Save>.
3. Select a number, if necessary.
2. Select Phone
.
4. Press [ ] to dial or
3. Select a number type.
4. Enter a name and press <OK>.
To the SIM card
<Options> to access options.
Send messages
1. In Idle mode, enter a phone
1. In Idle mode, press [Left], or
number and press <Save>.
Send a text
message (SMS)
press <Menu> and select
2. Select SIM
.
Messages
Create
→
Short messages
3. Enter a name and press <OK>.
4. Enter a location number.
→
.
2. Enter the message text.
5. Press <OK> to save the entry.
3. Press <Options> and select
Send
.
4. Enter a destination number.
5. Press <OK> to send the
message.
15
Step outside the phone
1. In Idle mode, press <Menu
and select Messages
Multimedia messages
Create
>
11.Press <Opt.> and select Send
12.Select an empty location.
13.Enter a destination.
.
Send a
→
multimedia
message
(MMS)
→
.
14.Press <Send> to send the
2. Press <Add> on the Subject
message.
line.
3. Enter the message subject and
View messages
press <OK>.
4. Press <Add> on the Picture
When a notification appears:
View a text
message
line.
Press <View>. The message
displays.
5. Add an image file.
6. Scroll to the Sound line and
From the Inbox:
press <Add>.
1. In Idle mode, press <Menu
>
Short
7. Add a sound file.
and select Messages
messages Inbox
2. Select a message.
→
8. Scroll to the Message line and
→
.
press <Add>.
9. Enter the message text.
10.Press <Opt.> and select Done
.
16
Manage schedule
When a notification appears:
View a
multimedia
message
1. Press <View>.
1. In Idle mode, press and hold
].
Create a new
memo
[C
2. Press <Options> and select
Retrieve. The message
displays.
2. Enter the memo content and
press <OK>.
From the Inbox:
3. Select a memo type.
4. Select a date.
1. In Idle mode, press <Menu
and select Messages
Multimedia messages
Inbox
2. Select a message.
>
→
5. Enter the time for the memo
→
and press <OK>.
.
6. Press <Yes> to set an alarm.
7. Enter the time for the alarm to
ring and press <OK>.
1. Press and hold [
1] in Idle
Access a
8. Select an alarm tone.
mode.
voicemail
2. Follow the instructions from the
system.
1. In Idle mode, press <Down>.
2. Select a date.
Access your
schedule
3. Press <Left> or <Right> to
view the schedule for that day.
17
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Enter text
ABC, Arabic, T9, Number, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol mode.
Characters in order displayed
Key
Upper case
Lower case
1
2
3
4
5
6
7
8
9
0
.
,
-
?
!
’
@
:
1
A
D
G
J
B
C
F
I
2
3
4
5
a
d
g
j
b
e
h
k
c
f
i
2
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
E
H
K
N
Q
U
3
4
5
L
l
To change the text input mode, press the right soft
key and select a text input mode.
M
P
T
O
6
m
p
t
n
o
6
R
V
Y
S
8
7
9
q
r
s
7
Example: Entering a name in Phonebook
u
v
8
W X
0
Z
w
x
y
z
9
Tips for using ABC mode
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Text input mode
indicator
•
Press [ ] to insert a space.
18
•
Press [ ] to change case. Capital lock ( ), Lower
case (No indicator), and Initial capital ( ) are
available.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
•
•
Press [Left] or [Right] to move the cursor.
Otherwise, press [
choices. For example, Of and Me use [
Depending on your country, [ ] may be not
0
] to display alternative word
6] and [3].
Press [
C
] to delete characters one by one. Press
and hold [
C] to clear the display.
0
available for scrolling alternative word choice.
Using Arabic mode
You can use the Arabic writing mode. This mode has
the same properties as the English writing mode which
is explained above.
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
•
Press [
automatically.
Press [ ] to change case in T9 mode. Capital lock
1] to enter periods or apostrophes
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
•
(
(
), Lower case (No indicator), and Initial capital
) are available.
Entering a word in T9 mode
•
•
Press [Left] or [Right] to move the cursor.
Press [ ] to delete characters one by one. Press
and hold [ ] to clear the display.
1. Press [2] to [9] to start entering a word. Press
C
each key once for each letter.
C
For example, press [4], [3], [5], [5], and [6] to
enter Hello.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
T9 predicts the word that you are typing, and it
may change with each key that you press.
19
2. Press [0] to display alternative words for your key
Call functions
Advanced calling features
presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press <Spell>.
Making a call
1. In Idle mode, enter the area code and phone
number.
4. Enter the word you want using ABC mode and
press <OK>.
Using Number mode
2. Press [ ].
Number mode enables you to enter numbers.
Press [C]
to clear the last digit or press and hold
[
C
] to clear the whole display. You can move the
Press the keys corresponding to the digits you want.
cursor to edit an incorrect digit.
Using Symbol mode
Making an international call
Symbol mode enables you to insert symbols.
1. In Idle mode, press and hold [
appears.
0
]. The
+
character
To
Press
2. Enter the country code, area code, and phone
number, then press [ ].
display more symbols
select a symbol
[Up] or [Down].
the corresponding
number key.
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
clear the symbol(s)
insert the symbol(s)
[
C
].
2. Scroll to the number you want and press [ ].
<
OK>.
20
Making a call from Phonebook
Tips for answering a call
•
When Anykey answer is active, you can press
any key to answer a call, except for [ p. 57
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
]ꢀ
Phonebook.ꢀp. 25
•
When Active folder is active, you can just open
the phone to answer a call.
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
•
•
Press [
] to reject a call.
keys.
ꢀp. 27
Depending on the Side key setting, you can press
and hold [ / ] to mute the ringer or reject a
Dialling a number from the SIM card
call.
ꢀp. 57
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
Viewing missed calls
2. Scroll through other numbers.
3. Press <Dial> or [ ] to dial the number you want.
If you have missed calls, the screen displays how
many calls you have missed.
Ending a call
1. Press <Missed>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Close the phone or press [
].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press [ ] or <Accept> to answer the call.
21
Call functions
Recording your call conversation.
Press <Options> and select Conv. record to record
your conversation during a call.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Access your recorded conversation in the Voices
menu.
Connect the headset to the jack on the right side of
the phone.
The buttons on the headset work as listed below:
Placing a call on hold/Retrieving
Press <Hold> or <Retrie.> to place the call on hold
or retrieve the call.
To
Press
redial the last call
answer a call
end a call
the button twice.
and hold the button.
and hold the button.
Making a second call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
Options during a call
You can access a number of functions during a call.
4. Press <Options> and select End held call to end
the call on hold.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
5. To end the current call, press [
].
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
22
Answering a second call
Using the voice clarity feature
You can answer an incoming call, if your network
supports it and you have activated the call waiting
This feature removes extraneous noise and increases
call quality so that the person with whom you are
speaking can hear you clearly even if you are in a
noisy place.
feature.ꢀp. 31
1. Press [ ] to answer the call. The first call is
automatically put on hold.
Press <Options> and select Voiceclarity on or
Voiceclarity off
.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
Switching off the microphone (Mute mode)
the call on hold.
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
4. To end the current call, press [
].
Transferring a call
You can transfer the current call to the call on hold so
the callers can talk to each other.
Press <Options> and select Mute or Unmute
.
Muting or sending key tones
You can turn the key tones off or on.
Press <Options> and select Transfer
.
Press <Options> and select Mute keys or Send
keys
Using the loudspeaker
You can talk and listen to the phone a short distance
away.
.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
Press <Options> and select Loud spk. on or Loud
spk. off
.
23
Call functions
Sending a sequence of DTMF tones
Using the SIM service
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
1. When connected with a teleservice system, press
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
<
Options> and select Send DTMF
2. Enter the number you need to send and press
OK>.
.
<
Your service provider must support multi-party calls
for you to use this feature.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.
Setting up a multi-party call
1. Call the first participant.
ꢀp. 25
2. Call the second participant. The first call is
automatically put on hold.
Press <Options> and select Phonebook
.
3. Press <Options> and select Join. The first
Using the message service
participant is added to the multi-party call.
You can access the Messages menu to read an
incoming message and send a new message.
Press <Options> and select Message
4. If desired, call another person or answer an
incoming call.
ꢀp. 34
.
24
5. Press <Options> and select Join
.
Menu functions
6. Repeat steps 4 and 5 as desired.
All menu options listed
Having a private conversation with one
participant
Phonebook
1. Press <Options> and select Split
.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press <Options
>
You can manage your Phonebook entries and access
the service directory in the Phonebook menu
and select Join
.
Dropping one participant
To access this menu, press <Phonebook> in Idle
mode.
1. Press <Options> and select Remove
.
2. Select a name or number from the participant list.
Find name (Phonebook 1.1)
The participant is dropped from the call, but the
call continues with the other parties.
Use this menu to search for numbers in Phonebook.
3. Close the phone or press [
multi-party call.
] to end the
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
25
Menu functions
3. If you selected an entry in the phone’s memory,
scroll to the number or information item you want.
3. Select a number type.
4. Enter a name and press <OK>.
4. Press [ ] to dial the number, or <Options> or
5. Press [Right] and change the settings or enter
information about the contact.
<Edit> to change the information.
•
Mobile
number in any category.
Email: assign an e-mail address.
Note: add a memo about the person.
Group: assign the number to a caller group.
Graphic: assign an image as a caller ID image
to alert you to a call from the number.
Alert: assign a ringer melody to alert you to a
call from the number.
/Home/Office/Fax/Other: add a
Using Phonebook options
While viewing a contact in Phonebook, press
•
•
•
•
<Options> to access the following options:
•
Edit number: change the currently selected
number.
•
•
•
Change name: change the contact’s name.
Send message: send an SMS message.
•
Copy: copy the number to the phone’s memory or
SIM card.
Storing a number on the SIM card
1. Enter a number and press <Save>.
1. Select SIM
•
Delete entry: delete the entry.
Add entry (Phonebook 1.2)
2. Enter a name and press <OK>.
Use this menu to add a new contact to Phonebook.
3. If necessary, change the location number and
Storing a number in the phone’s memory
1. Enter a number and press <Save>.
press <OK>.
2. Select Phone
.
26
Dialling speed dial entries
Speed-dial list (Phonebook 1.3)
Press and hold the appropriate key in Idle mode.
Use this menu to assign speed dial numbers (2 to 9)
for eight of your most frequently called numbers.
Copy all to phone (Phonebook 1.4)
Assigning speed dial entries
Use this menu to copy all of the entries on the SIM
card to the phone’s memory.
1. Select a key location from
for your voice mail server.
2
to
9. Key
1
is reserved
The numbers will be copied, labelled with Mobile by
default.
2. Select Edit number
.
3. Enter a phone number, or press <Phonebook
>
and select the contact you want from the contact
list.
Delete all (Phonebook 1.5)
Use this menu to delete all entries in each memory
location.
4. Press <OK>.
Managing speed dial entries
1. Press <Select> to check the memory locations to
After setting speed dial entries, select it to access the
following options:
be cleared.
2. Press <OK>.
•
•
•
Edit number: assign a different number to an
assigned key.
3. Press <Yes> to confirm the deletion.
4. Press the phone password and press <OK>.
Change name: assign a name to the entry or
change the name.
The password is preset to 00000000. You can
change this password.ꢀp. 56
Delete: clear all speed dial settings.
27
Menu functions
Own number (Phonebook 2.1)
Service directory (Phonebook 3.1)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers.
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
Changes made here do not affect the actual subscriber
numbers on your SIM card.
Group setting (Phonebook 2.2)
Scroll to the number you want and press <Dial> or
[
].
Use this menu to change the properties of caller
groups.
SIM-AT (Menu 1)
•
Melody: select a melody to sound when a call
comes in from a member of the group.
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans.
•
•
Change name: change the group name.
View image: view an image to display when a call
comes in from a member of the group.
For details, see your SIM card instructions or contact
your service provider.
Memory status (Phonebook 2.3)
Use this menu to check the number of entries you
have saved and the total number of entries you can
save in the phone’s memory and on the SIM card.
28
Dialled calls (Menu 2.3)
Call records (Menu 2)
This menu displays the most recent calls you have
dialled.
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
Delete all (Menu 2.4)
To access this menu, press <Menu> in Idle mode and
select Call records
.
Use this menu to delete all of the records in each call
type.
Missed calls (Menu 2.1)
1. Press <Select> to check the call type(s) to be
cleared.
This menu displays the most recently received calls
that you did not answer.
2. Press <OK>.
While viewing a call record, press <Options> to
3. Press <Yes> to confirm the deletion.
access the following options:
Call time (Menu 2.5)
•
•
•
Delete: delete the call record.
Delete all: delete all call records.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
Paste: paste the number of the call into the
dialling mode screen.
•
•
Last call time: check the length of your last call.
Received calls (Menu 2.2)
Total sent: check the total length of all the calls
you have dialled.
This menu displays the most recent calls you have
received.
•
Total received: check the total length of all the
calls you have received.
29
Menu functions
•
Reset timers: reset the call timers. You need to
enter the phone password.
•
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
The password is preset to 00000000. You can
change this password.ꢀp. 56
Network services (Menu 3)
Call costs (Menu 2.6)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
To access this menu, press <Menu> in Idle mode and
select Network services
.
•
•
Last call cost: check the cost of your last call.
Call diverting (Menu 3.1)
Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
•
•
•
Max cost: check the maximum cost limit set in
•
•
•
Divert always: divert all calls.
Set max cost
.
Busy: diver calls when you are on another call.
No reply: divert calls when you do not answer
the phone.
Reset counters: reset the cost counters. You
need to enter your PIN2.
Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
•
Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
30
•
Cancel all: cancel all call diverting options.
•
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be diverted.
3. To activate call diverting, select Activate
.
•
•
Otherwise, select Remove
.
4. Enter the number to which calls are to be diverted
and press <OK>.
5. If you selected No reply, select the length of time
the network delays before diverting a call and
press <Select>.
2. Select the type of calls to be barred.
3. Press <Activate>. To deactivate call barring,
press <Deactivate>.
Call barring (Menu 3.2)
4. Enter the call barring password supplied by your
This network service allows you to restrict your calls.
1. Select a call barring option:
service provider and press <OK>.
Call waiting (Menu 3.3)
•
•
•
All outgoing: prohibit all outgoing calls.
International: prohibit international calls.
International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country, defined as where your home network
provider is located.
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Activate>. To deactivate call waiting,
press <Deactivate>.
•
All incoming: prohibit incoming calls.
31
Menu functions
Network selection (Menu 3.4)
Band selection (Menu 3.6)
This network service allows you to either automatically
or manually select the network used when roaming
outside of your home area.
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900, Combined GSM 900/1800 and Combined
GSM 900/1800/1900.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
•
Automatic: connect to the first available network
when roaming.
•
Manual: select the network you want.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
Caller ID (Menu 3.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
Active line (Menu 3.7)
•
•
•
Default: use the default setting provided by the
network.
Some SIM cards may be used with two subscriber
numbers. Use this menu to select the line to be used
to make calls, if your SIM card supports two numbers.
Hide number: ensure your number does not
display on the other person’s phone.
Calls come in on both lines, regardless of the
selected line.
Send number: send your number each time you
make a call.
32
Messages (Menu 4.2)
Sound settings (Menu 4)
Use this menu to set up the ringer for incoming SMS
messages and MMS messages.
Use this menu to customise various sound settings.
Incoming calls (Menu 4.1)
•
•
Tone: select one of several message tones.
Alert type: specify how you are informed of any
incoming messages.
Use this menu to set up the ringer for incoming calls.
•
Default melodies: select one of the preset
melodies.
•
Repetition: specify how often the phone informs
you of a new message.
•
My sounds: select one of sounds downloaded
from the wireless web or Samsung PC Studio
programme, or received by MMS.
Power on/off (Menu 4.3)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
•
•
Ring volume: adjust the ringer volume.
Alert type: specify how you are to be informed of
incoming calls.
Connection tone (Menu 4.4)
Melody: the phone rings using the selected ring
tone.
Use this menu to set the phone to beep when it is
connected to the system.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.
Key tone (Menu 4.5)
Use this menu to select the tone that the phone
sounds when you press a key.
Light only: the phone flashes the service light.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
33
Menu functions
To access this menu, press <Menu> in Idle mode and
select Messages
Minute minder (Menu 4.6)
.
Use this menu to set the phone to beep every minute
during an outgoing call to keep you informed of the
length of your call.
Short messages (Menu 5.1)
Short Message Service (SMS) allows you to send or
receive text messages including pictures, audio clips,
and animated images.
Quiet mode (Menu 4.7)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
The maximum number of characters allowed in a
short message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
•
•
Vibration: set the phone to vibrate.
Mute: mute all sound settings.
Create (Menu 5.1.1)
You can create and send a text message.
1. Enter your message.
Alerts on call (Menu 4.8)
Use this menu to select whether or not the phone
informs you when you receive a new message or when
the time for an alarm comes during a call.
You can enter up to 160 standard characters, or
approximately 70 Unicode characters, such as ‘â’.
2. Press <Options> to access the following options:
•
•
•
Add media: add a picture, an animated image,
or a melody to the message.
Add phonebook: add a phone number from
the phonebook.
Messages (Menu 5)
Use the Messages menu to send and receive short
messages and multimedia messages. You can also use
WAP push message, Voice mail, and Cell broadcast
message features.
Preset messages: retrieve a text template.
34
•
Save message: save the message to Outbox
so that you can send it later.
•
Transfer: move the message between the SIM
card and the phone’s memory.
3. Press <Options> and select Send
.
Outbox (Menu 5.1.3)
4. Enter a destination number.
You can view sent or saved text messages.
To send the message to more than one
destinations, press <Add> and repeat this step.
While viewing a message, press <Options> to access
the following options:
5. When you have finished, press <OK> to send the
•
•
Delete: delete the message.
message.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Inbox (Menu 5.1.2)
You can view received text messages in this menu.
•
•
•
Send: forward the message.
While viewing a message, press <Options> to access
the following options:
Edit: edit the message.
Transfer: move the message between the SIM
•
•
•
•
Delete: delete the message.
Message reply: reply to the sender.
Call back: call the sender.
card and the phone’s memory.
Delete all (Menu 5.1.4)
Use this menu to delete all of your messages in each
message box.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
1. Press <Select> to check the message boxes to be
•
•
•
Send: forward the message.
cleared.
Edit: edit the message.
2. Press <OK>.
Extract media: save images or sounds from the
message into your phone.
3. Press <Yes> to confirm the deletion.
35
Menu functions
•
•
Add page: add a new page.
Page timing: set the length of time the
current page displays.
Multimedia messages (Menu 5.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, picture, and sound,
from phone to phone or from phone to e-mail.
•
•
Text effect: change the text attributes.
Clear subject
clear the added item.
Delete page: delete the current page.
Save message: save the message to Draft or
My folder
11.When you have finished, press <Opt.> and select
Send
12.Select an empty location.
13.Select Number E-mail, or Phonebook
/picture/sound/message:
Create (Menu 5.2.1)
You can create and send an MMS message.
1. Press <Add> on the Subject line.
2. Enter a message subject and press <OK>.
3. Move to the Picture line and press <Add>.
•
•
.
.
4. Select Create New and take a new photo, or
select an image category and select an image
item.
,
.
5. Move to the Sound line and press <Add>.
14.Enter a destination number or an e-mail address,
or select a number from Phonebook.
6. Select Record new and record a new sound, or
select a sound category and select a sound clip.
To enter additional destinations, repeat from step
12.
7. Move to the Message line and press <Add>.
15.When you have finished, press <Send>.
8. Enter the message text.
9. Press <Opt.> and select Done
10.Press <Opt.> to access the following options:
Preview: check the message you created.
.
•
36
•
Move to My folder: move the message to My
folder
Inbox (Menu 5.2.2)
.
This menu displays MMS messages that you have
received. The following icons tell you the message
status:
When you select a notification, you can access
Retrieve to retrieve the message from the MMS
server.
•
•
•
•
•
has been read
has not been read
Outbox (Menu 5.2.3)
is being retrieved from the server
Notification that you have not read
Notification that you have read
This menu displays MMS messages that you have
sent. The following icons tell you the message status:
•
•
•
•
currently being sent
sent
While viewing a message, press <Opt.> to access the
following message options:
your phone couldn’t send
opened by the recipient
•
•
•
•
•
•
Delete: delete the message.
Replay: replay the message.
While viewing a message, press <Opt.> to access the
following options:
Reply: reply to the sender.
Forward: forward the message to another person.
Call back: call the sender.
•
•
•
•
•
Delete: delete the message.
Replay: replay the message.
Cut media: extract media items from the
message.
Send: send or resends the message.
Properties: view the message properties.
Move to My folder: move the message to My
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
folder
.
Properties: view the message properties.
37
Menu functions
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Draft (Menu 5.2.4)
After creating a multimedia message, you can store it
in this message box for sending later. Messages
interrupted while created are also saved in this
message box.
Properties: view the message properties.
Delete all (Menu 5.2.6)
Use this menu to delete all of the messages in each
message box.
While viewing a message, press <Opt.> to access the
following options:
1. Press <Select> to check the message boxes to be
•
•
•
•
Send: send the message.
cleared.
Replay: replay the message.
Delete: delete the message.
Properties: view the message properties.
2. Press <OK>.
3. Press <Yes> to confirm the deletion.
Push messages (Menu 5.3)
My folder (Menu 5.2.5)
Use this menu to access messages from the WAP
server.
In this menu, you access messages you have moved
from Inbox or Outbox, or you have saved while
creating. While viewing a message, press <Opt.> to
access the following options:
•
•
Inbox: display push messages you have received.
Setting: determine whether or not your phone
•
•
•
•
Delete: delete the message.
Replay: replay the message.
Send: send the message.
receives push messages.
Always: the phone receives all push messages.
Never: the phone rejects push messages.
Cut media: extract media items from the
Optional: the phone receives only push messages
message.
from the service centre set in this option.
38
•
Delete all: delete all push messages.
You can take the call by pressing <Accept> while
this feature is activated.
Preset messages (Menu 5.4)
Use this menu to preset message templates to retrieve
them when composing a new message.
•
•
Inbox: listen to or delete the message that a
caller leave.
Voice mail (Menu 5.5)
Settings
Activate: turn on or off this feature.
Use this menu to store the number of the voice mail
server and access your voice mails.
Time setting: set the time interval from receiving
a call signal till activating the answer phone
feature.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
Screen setting: when this feature is enabled, you
can listen to the caller’s recording voice while the
caller is recording the message.
•
•
Connect to voice mail: connect to the voice
server to allow you to listen to your messages. You
can also connect to the voice mail server by
Record my greeting: record the message to
guide.
pressing and holding [1] in Idle mode.
Select the greeting: The phone offers two
default messages, and one message of your own.
You can select User recording only when you have
recorded your own message.
Voice server number: change the voice mail
server name or number.
Answering Machine (Menu 5.6)
•
Delete all: delete the recorded message.
Use this menu to inform callers of your current
situation and to guide them to leaving messages.
39
Menu functions
Broadcast (Menu 5.7)
Settings (Menu 5.8)
The Cell Broadcast service delivers short messages on
various topics such as the weather or traffic.
Use this menu to customise the settings required for
sending and receiving messages.
Use this menu to change the settings for the service
and access broadcast messages.
Short messages (Menu 5.8.1)
Use this menu to customise the SMS settings.
•
Read: open received messages.
The setting options available in this menu may vary
depending on your service provider.
The Temporary box saves network messages until
the phone is switched off.
•
•
Service centre: store or changes the number of
your message centre.
The Archive box saves network messages
indefinitely. Press <Options> and select Save
when a text notification appears. The message is
saved in the Archive box.
Validity period: set the length of time your
messages are stored in the message centre while
the network attempts to deliver them.
•
•
•
Receive: enable or disable the reception of
broadcast messages.
•
•
Message type: set the default message type.
Reply path: allow the recipient to reply to you
through your message centre.
Channel: specify the channels from which you
receive broadcast messages.
•
Delivery report: set the network to inform you
when your message has been delivered.
Language: select the language in which broadcast
messages display.
Please contact your service provider for details.
Multimedia messages (Menu 5.8.2)
Use this menu to customise MMS settings.
40
Send settings
•
Anonymous reject: reject messages from
anonymous senders.
•
•
Priority: set the priority level of your messages.
•
•
Adverts reject: reject advertisements.
Validity period: set the length of time your
messages are stored in the message centre.
Report allowed: send a delivery report from the
network to the sender.
•
•
•
•
Delivery after: set the time delay before
messages are sent.
MMS profiles
Address hiding: hide your phone number on the
recipient’s phone.
You can configure required network settings for MMS.
The last profile accessed is automatically activated for
sending or receiving subsequent messages.
Delivery report: set the network inform to you
when your message has been delivered.
Check with your service provider before you change
any MMS settings on your phone.
Read reply: request a reply from the recipient.
Receive settings
•
•
Current profile: select a profile.
•
Msg. reception: determine if your phone
retrieves new messages automatically:
Profile setting: customise the following options
for each profile:
Manual: the phone displays notifications. Use the
Retrieve option to manually download new
messages.
Profile name: assign a name to the MMS profile.
Server URL: enter the address of your MMS
server.
Automatic: the phone automatically retrieves
messages from the server.
GPRS setting: customise the settings required for
connecting to the GPRS network.
Reject: the phone rejects all messages.
-
Gateway: enter the IP address and port number.
41
Menu functions
-
APN: enter the access point name used for the
information and a wide variety of media content, such
as wallpapers and ring tones.
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
-
-
Home (Menu 6.1.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
Memory status (Menu 5.9)
Use this menu to view the total number of messages
you can store and the number of messages you have
stored on the SIM card and in the phone’s memory.
Navigating with the WAP browser
To
Press
scroll through browser items
select a browser item
return to the previous page
return to the homepage
[Up] or [Down].
Fun box (Menu 6)
The Fun box menu allows you to use the WAP
browser, play Java games, and access images and
sounds stored in the phone’s memory.
<
>.
[C].
[
] and select
Home
.
To access this menu, press <Menu> in Idle mode and
select Fun box
.
Selecting and using browser menu options
WWW services (Menu 6.1)
1. Press <Menu> and Browser menu. Or select the
on the top of the screen.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access updated
2. Select one of the following browser options:
•
•
Back: go back to the previous page.
Home: go back to the homepage.
42
•
•
•
Exit: exit the WAP browser.
Adding a bookmark
Reload: reload the current page.
Show URL: display the URL address of the
current web page. You can also set the current
page as the homepage for the WAP browser.
About...: view version information for your
WAP browser.
1. Select an empty location.
2. Enter a URL address and press <OK>.
3. Enter a name for the bookmark and press <OK>.
Using bookmark options
•
After saving an item, select it to access the following
options:
Using WAP page options
•
•
•
Go: access the website.
From any WAP pages, press [ ] to access the following
options:
Edit: edit the address and name of the bookmark.
Delete: delete the bookmark.
•
•
Goto URL: enter a URL address manually.
Bookmark: switch to the Bookmark menu.
ꢀ
Go to URL (Menu 6.1.3)
Menu 6.1.2
Use this menu to manually enter the URL address of a
website and access the website.
•
•
Messages: check the Inbox and Outbox boxes in
the Short messages menu. You can also create
and send a new SMS message.
Clear cache (Menu 6.1.4)
ꢀp. 34
Use this menu to clear the cache, which is the
temporary memory that stores the web pages you
have recently accessed.
Media box: switch to the Media box menu.
44
ꢀp.
Bookmark (Menu 6.1.2)
Use this menu to save URL addresses to quickly access
a website.
43
Menu functions
•
•
Home URL: set the address of your homepage.
Proxy settings (Menu 6.1.5)
Bearer: select the bearer to be used for each type
of network address accessed.
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
settings options.
Current proxy (Menu 6.1.6)
For each server, the following options are available:
Use this menu to activate one of the proxy servers you
have set up.
•
•
Proxy name: assign a name to the server profile.
GSM setting: customise the following GSM
network settings:
Media box (Menu 6.2)
Gateway: enter the IP address and port number.
Data call type: select a data call type.
Dial number: enter the PPP sever phone number.
Login ID: enter the user ID.
Use this menu to access media items stored in the
phone’s memory.
Photos (Menu 6.2.1)
Use this menu to access photos you have taken using
your camera.ꢀp. 53
Password: enter the password.
•
GPRS setting: customise the following GPRS
network settings:
Images (Menu 6.2.2)
This menu displays images downloaded from the
wireless web or received in messages.
Gateway: enter the IP address and port number.
APN: enter the access point name of the GPRS
network gateway.
While accessing an image, press <Options> to access
the following options:
Login ID: enter the user ID.
•
•
Send: send the image by MMS.
Password: enter the password.
Rename: change the name of the image.
44
•
•
Delete: delete the image.
3. Press <OK>.
Set as wallpaper: set the image as your
wallpaper for the idle screen.
4. Press <Yes> to confirm the deletion.
Memory status (Menu 6.2.5)
•
Properties: view the properties of the image.
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
Sounds (Menu 6.2.3)
This menu displays sounds recorded, downloaded from
the wireless web, or received in messages.
JAVA world (Menu 6.3)
While accessing a sound, press <Options> to access
the following options:
Use this menu to access and play Java games and to
change the network settings for accessing Java
services.
•
•
•
•
•
Send: send the sound by MMS.
Rename: change the name of the sound.
Delete: delete the sound.
Downloads (Menu 6.3.1)
Use this menu to play a Java game.
Set as ringtone: set the sound as your ring tone.
Properties: view the properties of the sound.
Playing a game
1. Scroll the game you want on the game list and
Delete all (Menu 6.2.4)
press Launch
.
You can delete all of the downloaded items in the
2. For SnowBallFight, press any key twice to go to
Photos Images, and Sounds folders.
,
the startup screen and press [ ] to start a game.
1. Select a media type.
For BubbleSmile, select START GAME
.
2. Press <Select> to check the folder(s) to be
Viewing game information
cleared.
45
Menu functions
Scroll to the game you want and press <Options>.
To access this menu, press <Menu> in Idle mode and
select Organiser
And then select Properties
.
.
Internet settings (Menu 6.3.2)
New memo (Menu 7.1)
Use this menu to set up the network settings required
for accessing the Java server.
Use this menu create a new memo.
You can quickly access this menu by holding down
•
•
•
•
APN: enter the access point name.
Login ID: enter the user ID.
[C] in Idle mode.
Creating a new memo
1. Enter the memo text and press <OK>.
2. Select a memo type.
Password: enter the password.
DNS settings: enter the primary and second DNS
addresses.
3. Select a date from the calendar.
Memory status (Menu 6.3.3)
4. If you selected Call in step 2, enter a phone
Use this menu to check the amount of memory
currently being used and memory available for Java
games.
number and press <OK>.
5. Enter the time for the memo and press <OK>.
Your phone is preset to a 24-hour format. You
Organiser (Menu 7)
can change the time format.ꢀp. 48
The Organiser feature enables you to keep track of
your schedule and tasks and to make a voice memo.
You can also set the time and date and use convenient
features, such as alarms, calculator, converter, and
stopwatch.
6. Select AM or PM in 12-hour time format.
7. Press <Yes> to set an alarm for the memo.
8. Enter the time for the alarm to ring and press
<OK>.
46
9. Select AM or PM in 12-hour time format.
Selecting a date in the calendar
•
•
•
Press [Left] or [Right] to move to another day.
Press [Up] or [Down] to move to another week.
10.Select an alarm melody. The memo is saved.
Using memo options
Press and hold [Up] or [Down] to move to another
month.
After the memo is saved, press <Options> to access
the following options:
•
Press and hold [Left] or [Right] to move to another
year.
•
•
•
•
•
Add: add a new memo.
Delete: delete the current memo.
Edit: edit the memo.
Using the calendar options
From the calendar, press <Options> to access the
following options:
Move: change the date of the memo.
Copy: copy the memo to another date.
•
Add memo: add a new memo to the selected
date.
Calendar (Menu 7.2)
•
•
•
Go to date: enter the date you want to access.
Use this menu to keep track of your monthly schedule.
View all: access all memos.
When you access this menu, the calendar displays
with today’s date is highlighted and selected. On the
bottom, the number of memos of each type appears.
The following icons indicate the type of memo:
Delete day: delete the memos stored for the
currently selected date.
•
Delete all: delete all memos.
Creating memos and using memo options
•
•
Scheduler
To do list
•
•
Call
You can create memos and access memo options as
you would in the New memo menu.
Anniversary
47
Menu functions
•
•
Set date: enter the current date.
To do list (Menu 7.3)
Set world time: set your local time zone and find
out what time it is in another part of the world.
Scroll to the time zone you want and press <Set
to access the following options:
This menu displays the list of To do list memos. The
following icons tell you the status of memos.
>
•
•
Done
Undone
Set local: set the time zone as your local time
zone.
While viewing a memo, press <Options> to access
the following options:
Set DST: apply the Daylight Savings Time to the
•
•
•
•
•
•
•
Add: add a new To do list memo.
Mark: change the status mark.
Edit: edit the memo.
time zone.
•
Set format: set the time format and date format.
Alarm (Menu 7.5)
Move: change the date of the memo.
Copy: copy the memo to another date.
Delete: delete the memo.
Use this menu to set alarms to ring at a specific time.
Setting an alarm
1. Select the type of alarm.
Delete all: delete all To do list memo.
2. Press <Options> to access the following options
Clock (Menu 7.4)
for setting the alarm:
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
•
•
•
Alarm day: select the days of the week.
Alarm time: enter the time for the alarm.
Alarm tone: select an alarm melody.
specify your time zone in Set world time
.
•
Set time: enter the current time.
3. Set each alarm options.
48
During recording,
Stopping an alarm
•
•
When the alarm sounds, press any key.
•
•
Select
Select
to pause recording.
to resume.
When the morning call alarm sounds, press
<
Confirm>.
To snooze the alarm. press any key, except for
Confirm>. The alarm will sound again after five
3. When you have finished, select
saved.
. The memo is
<
Voices (Menu 7.6.2)
minutes.
Use this menu to access the list of voice memos you
have recorded. Select a voice memo to listen.
•
To remove an alarm set, access it, press
<Options> and select Remove alarm.
During playback,
Setting the alarm to ring even if the phone is
off
•
•
•
•
•
•
Select
Select
Select
Select
Select
to pause.
to resume.
From the Alarm screen, select Autopower
→
On.
to move forward.
to move backward.
to stop.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
Voice recorder (Menu 7.6)
Press [ / ] to adjust the volume.
While viewing the voice memo list, press <Options
to access the following options:
>
Use this menu to record and play voice memos.
Record (Menu 7.6.1)
1. Press <Select> to start recording.
2. Speak into the microphone.
•
•
•
Send: send the voice memo by MMS.
Rename: change the name of the voice memo.
Delete: delete the voice memo.
49
Menu functions
•
Properties: view the properties of the voice
memo.
4. Press <Equal> to view the result.
Conversion (Menu 7.8)
Delete all (Menu 7.6.3)
Use this menu for common conversions, such as
temperature.
Use this menu to delete all of the voice memos you
have recorded at one time.
1. Select the converter type you want.
Settings (Menu 7.6.4)
2. Enter the value to be converted and press [Down].
Use this menu to change the recording time, volume
and default name.
•
•
Press [ ] to insert a decimal point.
Press [ ] to change the temperature to above
zero (+) or below zero (-).
Memory status (Menu 7.6.5)
You can check the total amount of memory and the
amount of memory currently in use for voice memos.
3. Press [Left] or [Right] to select the original unit
and press [Down].
4. Press [Left] or [Right] to select the unit you want
to convert to.
Calculator (Menu 7.7)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
5. Press <OK> to view the result.
Timer (Menu 7.9)
1. Enter the first number.
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Press [ ] to insert a decimal point.
2. Press [ ] to access the math function you want.
3. Enter the second number.
50
Starting the timer
1. Press <Set>.
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos.
2. Enter the length of time you want to count down
and press <OK>.
To access this menu, press <Menu> in Idle mode and
select Camera, or press [Up].
3. Press <Start> to start counting down.
Stopping the timer
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
•
•
Press any key to stop the timer when it rings.
Press <Stop> on the Timer screen to stop the
timer before it rings.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Stopwatch (Menu 7.10)
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
Take photos (Menu 8.1)
The camera produces JPEG photos.
1. Press <OK> to start the stopwatch.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
2. Press <OK> to check an interval. You can repeat
this step for a total of 4 intervals.
Taking a photo with the open phone
1. Open the phone.
2. Press and hold [ ]. The image to be captured
appears on the display.
51
Menu functions
3. Adjust the image by aiming the camera lens at the
subject.
Night mode: take a high quality photo in low
lighting conditions.
•
Press <
p. 52
Use the keypad to change the camera settings
or switch to other modes. p. 53
> to use the camera options.
Capture only: set the phone to automatically
return to Capture mode after saving a photo.
ꢀ
•
•
•
Frame: apply a decorative frame.
ꢀ
Effects: change the colour tone or apply a special
effect to the photo.
4. Press [ ] to take a photo. The photo is saved in
the My photos folder.
•
•
•
Rotation: flip the image vertically or view its
mirror image.
5. To
use photo options
Press
Timer: set a time delay before the camera takes a
photo.
<Options>.ꢀp. 54
Settings: change the default settings for taking a
photo.
delete the photo
<Delete>.
return to Capture mode
[C].
Photo size: select an image size.
Photo quality: select an image quality.
Using camera options in Capture mode
Shutter sound: select the sound that you hear
when you press the shutter, [ ].
In Capture mode, press <
options:
> to access the following
Default name: change the default prefix of the
photo name.
•
Mode: take a photo in the following modes:
Normal shot: take a photo in the normal mode.
•
Help: view the functions of the keys you can use.
Multi-shot: take a series of action stills. Select
the number of photos the camera will take.
52
Using the keypad in Capture mode
Key
7
Function
You can use the keypad to customise your camera
settings in Capture mode.
Selects a decorative frame.
Sets the timer.
8
Key
Function
9
Shows the photos stored in the My Photos
folder.
Flips the image vertically.
Shows the mirror image.
Adjusts the brightness of the image.
Taking a photo with the closed phone
1. Close the phone.
Left/
Right
2. Press and hold [ ]. The service LED is turned on.
Up/
Down
Zooms in or out.
3. Press [ ] to take a photo. The photo is saved in
the My photos folder.
1
2
3
4
5
Changes the size of the preview screen.
Changes the image size.
To review the photo, open the phone.
My photos (Menu 8.2)
Changes the image quality.
Changes the camera mode.
Use this menu to access a list of photos you have
taken.
Changes the colour tone or applies a special
effect to the photo.
Viewing the photos
1. Scroll to a photo and press <View>.
2. To go back to the photo list, press <Multi>.
6
Reduces the distortion on the image to
maximise detail and sharpness.
53
Menu functions
Using photos options
Delete all (Menu 8.4)
Press <Options> to access the following options:
Use this menu to delete all photos at one time.
Available options vary depending on whether you
are looking at the photo list or viewing a photo.
1. Press <Select> to check the photo categories to
be cleared.
2. Press <OK>.
•
•
•
•
Send: send the photo via MMS.
Rename: change the name of the photo.
Delete: delete the photo.
3. Press <Yes> to confirm the deletion.
Settings (Menu 8.5)
Move to album: move the photo to another photo
folder.
Use this menu to change the default settings for the
camera.
•
Set as: set the photo as your wallpaper or as a
caller ID image for a Phonebook entry.
•
•
•
Photo size: select an image size.
Photo quality: select an image quality.
•
•
Protection: protect the photo from being deleted.
Shutter sound: select the sound that you hear
when you press the shutter, [ ].
Properties: view the properties of the photo.
•
Default name: change the default prefix of the
photo name.
My albums (Menu 8.3)
Use this folder to save your photos in separate photo
albums.
Memory status (Menu 8.6)
You can view photos and use options the same way in
the My photos menu.
Use this menu to check the amount of memory
currently being used and memory available for the
camera.
54
Skin (Menu 9.1.2)
Phone settings (Menu 9)
The Phone settings menu allows you to customise
various settings for your phone. You can also reset the
settings to their default values.
You can select a skin colour pattern for Menu mode.
Back light (Menu 9.1.3)
You can select the length of time the backlight stays
on.
To access this menu, press <Menu> in Idle mode and
select Phone settings
.
LCD contrast (Menu 9.1.4)
You can adjust the brightness of the display for
varying lighting conditions.
Display (Menu 9.1)
Use this menu to change settings for the display and
light.
Dialing font color (Menu 9.1.5)
You can select whether or not the dialing font color is
used.
Wallpaper (Menu 9.1.1)
You can change the background image and the
settings for the text of Idle mode.
Service light (Menu 9.1.6)
You can select whether or not the service light is used.
•
•
•
Animations: select one of animated images.
Photos: select one of photos you have taken.
Greeting message (Menu 9.2)
Images: select one of images downloaded from
the wireless web or Samsung PC Studio, or
received by MMS.
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Language (Menu 9.3)
•
•
Text position: select a position of the text
displayed on the Idle screen.
Use this menu to select one of several languages for
the display text and input mode, separately.
Text style: select a text style.
55
Menu functions
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
Security (Menu 9.4)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
The password is preset to 00000000. To change the
password, use the Change password menu.
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
Change Password (Menu 9.4.4)
Use this menu to change your phone password. The
password is preset to 00000000
.
Privacy (Menu 9.4.5)
PIN check (Menu 9.4.1)
Use this menu to lock your media contents, including
MMS messages, voice memos, images, and sounds.
The 4-to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
1. Press <Select> to check the item(s) to be locked.
2. Press <OK> to lock the marked items.
3. Enter the phone password and press <OK>.
Change PIN (Menu 9.4.2)
To access a locked item, you need to enter the phone
password.
Use this menu to change your PIN. The PIN Check
feature must be enabled to use this feature.
SIM lock (Menu 9.4.6)
Phone lock (Menu 9.4.3)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
The Phone lock feature locks the phone from
unauthorised use.
56
must enter the SIM lock code to use a different SIM
card.
phone can hear you clearly even if you are in a noisy
place.
FDN mode (Menu 9.4.7)
Active folder (Menu 9.7)
If supported by your SIM card, Fixed Dialing Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
Phonebook. To use this feature, you must enter your
PIN2.
Use this menu to set whether to answer incoming calls
by opening the phone.
Side key (Menu 9.8)
Use this menu to set how the Volume keys act when a
call comes in.
Change PIN2 (Menu 9.4.8)
•
Reject: you can reject calls by holding down the
keys.
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
•
Silence: you can mute the ringer by holding down
the keys.
Auto redial (Menu 9.5)
Use this menu to set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
Anykey answer (Menu 9.9)
Use this menu to set whether to answer incoming calls
by pressing any keys, except [
].
Voiceclarity (Menu 9.6)
Use this menu to remove extraneous noise and
increase call quality to allow the other person on the
57
Date system (Menu 9.10)
Solve problems
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
Use this menu to select a date system. This change is
applied into the calendar, memo’s date and etc.
Reset settings (Menu 9.11)
When you switch on your phone, the following
messages may appear:
Use this menu to reset the phone to its default
settings.
“Insert SIM”
1. Select a setting category.
•
Be sure that the SIM card is correctly installed.
2. Press <Yes> to confirm the reset.
“Phone lock Enter password”
3. Enter the 4- to 8-digit phone password and press
<
OK>.
The password is preset to 00000000. You can
change this password. p. 56
•
The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
ꢀ
“Enter PIN”
•
You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
•
The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
58
“Enter PUK”
The PIN code has been entered incorrectly three
Your correspondent cannot reach you
•
•
•
•
Be sure your phone is switched on. ([
for more than one second.)
] pressed
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
Be sure you are accessing the correct cellular
network.
“No service,” “Network failure,” or “Not done”
displays
Be sure that you have not set an outgoing call
barring option.
•
The network connection has been lost. You may be
in a weak signal area. Move and try again.
Your correspondent cannot hear you speaking
•
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
•
•
Be sure you have switched off the microphone.
Be sure you are holding the phone close enough to
your mouth. The microphone is located at the
bottom of the phone.
You have entered a number but it was not
dialled
The phone starts beeping and “Battery low”
flashes on the display
•
•
Be sure that you have pressed [ ].
Be sure you have accessed the right cellular
network.
•
Your battery is insufficiently charged. Recharge the
battery.
•
Be sure that you have not set an outgoing call
barring option.
The audio quality of the call is poor
Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
•
(
59
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
Health and safety information
SAR certification information
No number is dialled when you re-call a
Phonebook entry
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
•
Use the Phonebook Search feature to ensure the
number has been stored correctly.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
•
Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
The highest SAR value for this model phone was
0.795W/kg.
60
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Precautions when using batteries
•
Never use a charger or battery that is damaged in any
way.
•
•
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
•
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
•
•
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
*
The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tis-
sue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the network
band.
61
Health and safety information
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Li-
ion batteries are particularly affected by temperatures
below 0°C (32°F).
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
•
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow local
regulations in the country or region you are in.
•
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
•
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
62
Other medical devices
Electronic devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Your physician may be able to assist you in obtaining this
information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Hearing aids
Posted facilities
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Switch off your phone in any facility where posted notices
require you to do so.
63
Health and safety information
Potentially explosive environments
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
communications like medical emergencies.
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
64
Other important safety information
Care and maintenance
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
Keep the phone and all its parts and accessories out of
the reach of small children.
•
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
•
•
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
•
•
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
•
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
65
Health and safety information
•
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
•
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
•
•
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
•
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
66
dialled • 29
missed • 29
received • 29
Delivery reports, message •
40, 41
Dialled calls • 29
Display
layout • 10
settings • 55
DTMF tones, send • 24
Internet • 42
Index
A
ABC mode, text input • 18
Active folder • 57
Alarm • 48
Alet on call • 34
Answering
J
Java world • 45
Call time • 29
Caller ID • 32
Calls
K
Key tones
sending • 23
setting • 33
Keys • 9
answering • 21
barring • 31
diverting • 30
holding • 22
making • 20
redialling • 20
rejecting • 21
waiting • 31
E
call • 21
Emergency calls • 64
second call • 23
Any key answer • 57
Auto redial • 57
L
F
Language, select • 55
Last number, redial • 20
Locking
FDN (Fixed Dial Number) mode
• 57
Fun box • 42
B
Backlight time, set • 55
Band selection • 32
Barring, calls • 30, 31
Battery
SIM card • 56
Loudspeaker • 23
Low battery indicator • 8
Camera • 51
CB (Cell Broadcast) messages •
40
Characters, enter • 18
Connection tone • 33
Conversion • 50
G
Games • 45
Greeting message • 55
M
charging • 7
H
Media box • 44
Memory status
camera • 54
low indicator • 8
precautions • 61
Broadcast messages • 40
Browser, WAP • 42
Holding, call • 22
D
I
downloaded items • 45
messages • 42
phonebook 28
Message tone • 33
Messages
Deleting
Icons, description • 10
Images, downloaded • 44
Inbox, messages
MMS • 37
call records • 29
memos • 47
MMS messages • 38
phonebook • 26, 27
photos • 54
C
Calculator • 50
Call costs • 30
Call records
delete • 29
SMS • 35
International calls • 20
cell broadcast • 40
greeting • 55
SMS messages • 35
67
Index
MMS • 36
SMS • 34
voice • 39
SMS • 35
Own number • 28
locking • 56
PIN2, change • 57
Power on/off tone • 33
Privacy • 56
MMS • 37
SMS • 35
SIM card
inserting • 7
locking • 56
SMS messages
P
web • 38
Password
Minute minder • 34
Missed calls • 29
MMS messages
Push messages • 38
call barring • 31
phone • 56
Phone
Q
creating/sending • 34
deleting • 35
viewing • 35
Quiet mode • 12, 34
creating/sending • 36
deleting • 37
viewing • 37
care and maintenance •
65
display • 10
icons • 10
R
Sound settings • 33
Received calls • 29
Received messages
MMS • 37
Multi-party calls • 24
Muting
Sounds, downloaded • 45
Speed-dial • 27
Stopwatch • 51
Switching on/off
microphone • 23
phone • 8
keys • 9
key tones • 23
microphone • 23
SMS • 35
Recording
resetting • 58
switching on/off • 8
unpacking • 6
call conversation • 22
voice memos • 49
Redialling
automatically • 57
manually • 20
Resetting phone • 58
Road safety • 62
N
Names
Phonebook
T
entering • 18
searching • 25
Network selection • 32
Network services • 30
Number
copying • 26
deleting • 27
editing • 26
options • 26
speed-dialling • 27
T9 mode, text input • 19
Text input mode, change • 18
Text, enter • 18
Timer • 50
searching/dialling • 25
storing • 26
Photos
Tone
S
deleting • 54
taking • 51
viewing • 53
call ringer • 33
connection • 33
keypad • 33
message • 33
power on/off • 33
Safety
information • 60
precautions • 1
Security, calls • 56
Sent messages
O
Organiser • 46
Outbox, messages
MMS • 37
PIN
changing • 56
68
V
Voice clarity • 23, 57
Voice mail • 39
Voice memos
playing • 49
recording • 49
Voicemail server • 39
W
Waiting call • 31
WAP browser
access • 42
bookmarks • 43
cache, clear • 43
World time • 48
69
|
