|
PROTON STICK V2
Portable USB FLASH Disk
Installation Manual
Version 1.0
Disclaimer
The manufacturer makes no representations or warranties, expressed, statutory or
implied, regarding the fitness or merchantability of this product for any particular
purpose. Further, the manufacturer is not liable for any damages, including but not
limited to, lost profits, lost savings, or other incidental or consequential damages
arising out of the use of this product. The manufacturer also reserves the right to
make any improvements or modifications to the product described in this manual at
any time, without notice of these changes.
Trademark Acknowledgments
All the trademarks and registered trademarks mentioned in this manual are the
property of their respective holders and are hereby acknowledged.
Copyright
This manual may not be copied, photocopied, transmitted, or translated into language
or computer language, in any form, or by any means, in whole or in part, without the
prior written consent by the Manufacturer.
(c) Copyright 2003. All rights reserved.
Manual Version 1.0
Information in this manual is subject to change without notice.
User’s Manual
Proton Stick V2 Portable USB Flash Disk
Driver Installation
A. Installation Procedure for Win 98 / 98se
1. Do NOT plug in the Proton Stick V2.
2. Insert CD driver disc and run “X:\driver\Setup.exe”. (Letter “X” refers to the
CDROM drive location.)
3. Click “Start” button.
4. Plug in Proton Stick V2 into the computer USB port and Windows will install the
driver automatically.
5. Afterwards, in “MY COMPUTER” you will find a new icon “REMOVABLE
DISK”. This is the location of Proton Stick V2.
6. Now, you are able to access all features that provided by Proton Stick V2.
** Please also read “UTILITIES” in this installation quick reference.
B. Installation Procedure for Win Me / Win 2000 / Win XP
There is Proton Stick V2 driver support in Win Me / Win 2000 / Win XP. After you
plug in Proton Stick V2 Windows will automatically install the driver. Just follow
the simple installation procedure, and finally, in “MY COMPUTER” you will find a
new icon “REMOVABLE DISK”.
For using security and partition functions, etc, ‘Manager’ application should be
installed. Insert CD driver disc and run “X:\manager.exe”. (Letter “X” refers to the
CDROM drive location.)
** Please also read “UTILITIES” in this installation quick reference.
** To “Uninstall” Proton Stick V2, plug off from the USB port.
C. Linux
For Linux, you can use the following instructions to mount the USB disk on.
1. Execute cd /etc/sysconfig (cat /etc/sysconfig/hwconf |more)
2. Check the device information in hwconf and write down the mount point (e.g.
/dev/sda)
3. Make a directory in /mnt (e.g. mkdir /mnt/flashdisk)
4. Mount the device on (e.g. mount /dev/sda/mnt/flashdisk if mount point is
/dev/sda)
3
User’s Manual
Proton Stick V2 Portable USB Flash Disk
Utilities
MANAGER
- Format
- Enable Password Secure Protection feature
- Make Disk Bootable
l
l
To execute MANAGER, simply click the shortcut.
Application MANAGER allows you to enable or disable the SECURE Protection
and BOOTABLE features (Only for Win98).
l
To enable the password security feature, format the Proton Stick V2 with security
partition option. To disable the password security feature, format the Proton Stick
V2 with the “Public partition only” option. (For Windows 2000, you need to
install service pack 3 or above to recognize both disks)
l
l
If “Password Feature” is enabled, you are able to modify the password in
“MANAGER”. During login process, if the password is correct, security partition
can be accessed.
If “Make Bootable Disk” is selected, Proton Stick V2 will copy some system files
for USB booting after formatting. This USB booting function is required
mainboard BIOS support. Not all mainboard BIOS has this support. Please
check your mainboard supplier for details.
*** The default password is “00000”
*** The USB Disk can be hot unplugged if no write action is performed to it.
However, if data has been moved to the USB Disk, then Eject or Safe removal action
is needed to prevent the data loss. Eject can be used to ensure the data integrity. Under
Windows, select the disk icon and click the right button of the mouse then select
“eject”. This will empty the write cache.
4
|