NEC NEAX 2000 and 2400 System
LinkPlus Interface Guide
SpectraLink 6000 System
SpectraLink 8000 System
July 2008 Edition
1725-36138-001
Version E
About this Guide
Polycom is the market leader in multi-cellular wireless telephone
systems for the workplace. We manufacture a range of products to
suit any size installation. All Polycom products use our LinkPlus
digital integration technology to integrate with various digital switch
platforms. Using LinkPlus technology, Wireless Telephones
(handsets) emulate digital telephone sets to deliver advanced
capabilities such as multiple line appearances and LCD display
features. This document explains the programming or administration
required to use the host digital switch with the following Polycom
products:
SpectraLink 6000 System - SpectraLink 6300 MCU
The SpectraLink 6300 MCU supports up to 3,200 handsets and up to
1,000 Base Stations. Up to 25 shelves can be interconnected for
maximum system capacity.
SpectraLink 6000 System – SpectraLink 6100 MCU
Designed for smaller installations supporting up to 64 handsets and
up to 16 Base Stations. Up to four MCU controllers can be
interconnected for maximum system capacity.
SpectraLink 8000 Telephony Gateway
The SpectraLink 8000 Telephony Gateway is a wireless telephony
product that provides high quality packetized voice communications
using the Internet Protocol (IP).
Different models of SpectraLink Wireless Telephones vary in
functional capabilities. This document covers the basic operational
features of all handsets. However, certain handset or PBX features
may not be supported by your emulation.
PN: 1725-36138-001_E.doc
3
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System
Related Documents
SpectraLink 6300 MCU : Operator’s Console (1725-36125-001)
SpectraLink 6100 MCU: Installation and Operation (1725-36097-001)
SpectraLink 6020 Wireless Telephone and Accessories User Guide
(1725-36092-001)
Available at
SpectraLink 8000 Telephony Gateway: Administration Guide for SRP
(1725-36028-001)
SpectraLink 8020/8030 Wireless Telephone and Accessories User Guide
(1725-36023-001)
SpectraLink e340/h340/i640 Wireless Telephone: Configuration and
Administration (SRP) (72-1065-09)
Available at
Telephone Switch Interface Matrix (1725-36128-001)
Available at
Customer Support
Polycom wants you to have a successful installation. If you have
questions please contact the Customer Support Hotline at
(800) 775-5330. The hotline is open Monday through Friday,
6 a.m. to 6 p.m. Mountain time.
For Technical Support: [email protected]
For Knowledge Base:
4
PN: 1725-36138-001_E.doc
About this Guide
Icons and Conventions
This manual uses the following icons and conventions.
Caution! Follow these instructions carefully to avoid danger.
Note these instructions carefully.
Label
This typeface indicates a key, label, or key on SpectraLink
hardware.
PN: 1725-36138-001_E.doc
5
1
Plan the Interface
The system administrator programs the telephone system for use with
the Wireless Telephone System using the normal administration
terminal or procedures. Programming can be done after the handsets
are registered.
Recommended programming includes assigning extension numbers
to the handsets and programming features on the telephone system so
they are easily accessible from the handsets.
For analog interfaces, macro codes are in the document relating to
configuring the system. See SpectraLink 6300 MCU: Operator’s Console,
SpectraLink 6100 MCU: Installation and Operation, or SpectraLink 8000
Telephony Gateway: Administration Guide for SRP.
The following information will help the system administrator set up
the SpectraLink Wireless Telephones to operate in a way that feels
familiar and comfortable to users.
Plan Programming
Digital Interface programming for the Wireless Telephone System will
be faster if it is planned in advance by verifying the parameters and
features on the current telephone system and wired phones. The
system administrator must assign extension numbers to the handsets
and plan the functions (trunk access, toll restrictions, system features,
ringing options etc.) to be programmed for the handsets.
One of these scenarios concerning how the handsets are programmed
should apply to this site:
•
All handsets are programmed alike: All handsets will be
programmed exactly the same. Depending on the capabilities of
the switch, the system administrator can often program one
handset and use it as a model for all other handsets.
•
Groups of handsets are programmed alike: Handsets are grouped
into classes that are programmed alike. Depending on the
capabilities of the switch, the system administrator can program
PN: 1725-36138-001_E.doc
7
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System
“model” handsets then use the model as a template to program
the other handsets.
•
All handsets are different: All handsets are programmed differently,
so each handset will be programmed individually.
Before installation, the parameters of the wired phones should be
verified to plan the parameters required for the handsets.
Line assignment
The handset supports up to nine line resources. Which lines should
ring at this handset and which lines will be selected when the user
goes off-hook?
Line appearances
Should this extension number appear on any other telephone? On
which sets should it ring?
Coverage
Where is this handset forwarded on busy/no answer? Does it belong
to a pickup group?
Toll restrictions
Should any special restrictions be assigned for incoming or outgoing
calls?
Programmable keys
Determine which features, if any, should be programmed on the
handsets. These assignments may emulate assignments on the user's
wired set.
If possible, identify a wired set that is programmed exactly or close to
the way the handsets should be programmed. This set can be used to
copy the programming to the new handsets.
8
PN: 1725-36138-001_E.doc
Plan the Interface
Assign Extension Numbers
The wire contractor should inform the system administrator which
port numbers have been designated for the handsets.
The system administrator may use the Extension Assignments
Worksheet at the end of this document to track the port numbers,
extensions, users, and features assigned to handsets.
The Wireless Telephone Display
The SpectraLink Wireless Telephone will display the telephone
number as it is dialed.
The NEAX ETJ-16DC-2 has a two-line by 20 character display. The
handset display is 2 lines by 16 characters; therefore, some NEAX
messages will be truncated when displayed on the handset. The first
two and last two characters will be truncated.
Certain characters may be used by the system that are not
implemented in the handset. Flashing characters are not implemented
on the handset, nor is rolling or scrolling of text.
Handset indicators
Line indicators are associated with line access keys. Status indicators
or icons are associated with voicemail, low battery function, other
functions, and service interruption. A left or right arrow is displayed
when the screen can be toggled either left or right to display more
characters.
When lines are programmed as shown on the key-map diagrams, the
numeral icons on the handset display will be mapped to any deskset
LEDs associated with the corresponding feature keys. The line icons
will be displayed as follows:
Line State
Handset Line Status Icon State
On-hook
Off
Off-hook
Ringing
On hold
On
Fast flash
Slow flash
PN: 1725-36138-001_E.doc
9
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System
Feature Programming Requirements
When planning the interface, the following information must be taken
into account:
Line sequences
The handset uses two types of key sequences to access PBX features
and multiple lines. Line sequences are those where the user presses
the LINE key and then a number key. The key-map design designates
“line” keys that should be programmed for line appearance so that
they correspond to line sequences on the handset.
The LINE icon on the handset will reflect activity on the corresponding
deskset key. For this reason, it is recommended that line appearance
keys be used only for line access. If only one line is assigned to a
particular handset, leave the other designated line keys identified on
the key maps unassigned. The corresponding handset LINE + key
sequences will then have no function.
Function sequences
Function sequences are those where the handset user presses the FCN
key and then a number key. Designated “function” deskset keys
programmed to system features such as Transfer and Conference may
have their corresponding menu items display on the handset function
menu. See the key-map diagram for the function keys that are
available for feature programming.
Function Menu Programming
SpectraLink 6300 MCU
The function menu text defaults for the handsets associated with the
SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s
Console.
10
PN: 1725-36138-001_E.doc
Plan the Interface
SpectraLink 6100 MCU
For the SpectraLink 6100 MCU, the handset function menu text can
only be changed via remote configuration through the services of
Polycom’s Customer Support.
SpectraLink 8000 Telephony Gateways
Function menu text options can be changed in the Administration
Console of the SpectraLink 8000 Telephony Gateways.
Hold
The Hold feature should be programmed to the Hold key as shown
on the key-map diagrams so that when the Hold key or softkey is
pressed on the handset, the call is placed on hold.
Mute
The handset Mute function is hard-coded to FCN +1 on the PTB4xx
handset. This function sequence is recommended, but the system
administrator can assign the Mute function to any available function
key sequence or leave the function unassigned. The SpectraLink 6000
and SpectraLink 8020/8030 Wireless Telephones use a Mute softkey.
Speakerphone
If a handset such as the PTB 4xx has no speaker, the SPKR and ANS
keys on the ETJ-16DC-2 are not mapped to keys on the handset.
Ring types
Handset ring types (soft, normal, vibrate, etc.) are programmed by the
handset user and are not accessible or changeable by the system
switch. Whenever possible the audible ringer on the handset will
follow the cadence provided by the system switch. Call progress tones
provided by the host system will be passed through to the handset.
PN: 1725-36138-001_E.doc
11
2
NEC NEAX 2000 and 2400
This section describes the recommended programming to use the
Wireless Telephone System with an NEC NEAX 2000 or NEAX 2400
telephone system. The procedures assume:
•
The NEAX is installed and operational in an approved
configuration. See Telephone Switch Interface Matrix for tested
configurations.
•
•
A trained NEAX technician or system administrator will be on site
with the Installer to program the system.
The SpectraLink 6000 System or SpectraLink 8000 Telephony
Gateway is installed and the handsets are available for
programming.
Set the Switch Interface Type
SpectraLink 6100 MCU
The SpectraLink 6100 Master Control Unit requires the switch
interface type to be configured using the front panel keys. The
configuration procedures are detailed in SpectraLink 6100 MCU:
Installation and Operation.
SpectraLink 6300 MCU
When configuring the SpectraLink 6300 MCU, the PBX interfaces are
available as sub-menu selections when defining the Interface Module
type using the SpectraLink 6300 MCU Operator’s Console. Refer to
SpectraLink 6300 MCU: Operator’s Console for details on configuring
the Interface Modules.
SpectraLink 8000 Telephony Gateways
Connect to the SpectraLink 8000 Telephony Gateway using the serial
or modem interface. From the Main Menu, choose Gateway
PN: 1725-36138-001_E.doc
13
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System
Configuration. Scroll to Telephone Switch Type and press enter to
change this field, from the Submenu of PBX types, select NEC NEAX.
Refer to SpectraLink 8000 Telephony Gateway: Administration Guide for
SRP for details on configuring the Telephone Switch Type.
Key-mapping the Handset to Emulate ETJ-16DC-
2 Functionality
LINE + 1
LINE + 2
LINE + 6
LINE + 3
LINE + 7
LINE + 4
LINE + 8
LINE + 5
LINE + 9
FCN + 6
FCN + 7
FCN + 8
FCN + 9
FCN + 5
FCN + 0
FCN + 3
FCN + 4
N / A
HOLD
FCN + 2
N / A
NEAX ETJ-16DC-2 Key-mapping
The FCN [number] and LINE [number] labels represent the key
sequence on the handset mapped to the corresponding key on the
desk set.
14
PN: 1725-36138-001_E.doc
NEC NEAX 2000 and 2400
The handset function menu default settings are shown in the table
below; these may be changed as described above in Function Menu
Programming. Some of these functions (Mute, Redial, Forward, etc.)
are activated by softkeys or FCN menu options on the SpectraLink
6000 and SpectraLink 8020/8030 Wireless Telephones.
FCN + 0
FCN + 2
FCN + 4
FCN + *
FCN + 1
FCN + 3
FCN + 5
FNC
MUTE
CNF
TRF
LNR/SPD
EXIT MENUS
RECALL
Program NEC NEAX
The System Administrator programs the NEAX for use with the
SpectraLink 6000 System or SpectraLink handsets using the NEC
Maintenance and Administration Terminal.
Copy settings from a wired set
If possible, copy the settings from a wired telephone with similar
settings and restrictions to a handset. Once this is done, you can
program the options on one handset, then copy the programming to
other handsets or groups of handsets. If your NEC systems are
networked, you may prefer to build each set individually rather than
use the Copy feature.
Program features for handset
Program the following features for the handsets:
•
•
•
Prime Line: Selects the line that users get when they go off hook. To
give users inside dial tone when they go off-hook, assign Intercom
as Prime Line.
Ringing Line Preference: Controls the way a station answers a
ringing line. To assign outside lines to display at all handsets, but
not ring at all handsets, Disable Direct Ring.
Toll Restrictions: Control which lines are allowed to make or receive
outside calls. They are programmed through a series of toll tables,
which are then assigned to lines and stations. If you copied an
existing wired set, Toll Restrictions will be set correctly for the
handset.
PN: 1725-36138-001_E.doc
15
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System
•
Class of Service: Assign the handsets to the Class of Service with
the appropriate features or functions. [delete dash to make this
one sentence, or is it more correct to have a colon then a new
sentence, imperative?]
•
•
Coverage and Pickup Groups: Assign the handsets to a coverage
and/or pickup group so unanswered calls will be appropriately
covered.
Unused features: Disable any speakerphone or loudspeaker
features (such as voice announce) as these are not supported on
the handset.
Copy settings to other SpectraLink Wireless Telephones
After the handsets have been programmed, copy the programming to
all “like” handsets.
The installer can now test the handsets.
16
PN: 1725-36138-001_E.doc
3
Extension Assignments Worksheet
Shelf: _______ Interface Module: _______
Interface
Module
Circuit #
Handset
Serial #
Handset #
Ext. #
Name
Comment
Handset 1
Handset 2
Handset 3
Handset 4
Handset 5
Handset 6
Handset 7
Handset 8
Handset 9
Handset 10
Handset 11
Handset 12
Handset 13
Handset 14
Handset 15
Handset 16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PN: 1725-36138-001_E.doc
17
|