Audio CD Recorder
CDR770/771
Instructions for use
Mode d'emploi
•
•
•
•
•
•
•
•
•
•
•
•
Instrucciones de manejo
Bedienungsanleitung
Gebruiksaanwijzing
Istruzioni per l'uso
Brugsanvisning
Bruksanvisning
Käyttöohje
Manual de utilização
O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
OPEN / CLOSE
REC
PLAY
/
P
AUSE
STOP
RECORD
TYPE
FINALIZE
ERASE
SOURCE
DISPLA
Y
PROGRAM
PROGRAM
SCROLL
SCROLL
STORE/
STORE/
EASY JOG
EASY JOG
CANCEL/
DELETE
MENU
MENU
REM
RECORD
TIME
6
TRACK
TEXT
LEVEL
TOTAL
REM
16
TRACK
TIME
STEP
1
2
3
4
5
7
8
9
10
11
1
2
13
14
1
5
17
1
8
19
20
SYNC
MANUAL
SHUFFLE
REPEA
T
AUDIO CD RECORDABLE/REWRIT
ABLE
Recordable
PROGRAM
SHUFFLE
REPEAT
DIGITAL
OPTICAL
CD
RW
1
1
ALL
ANALOG
SCAN
TRACK
ENTER
INFRA RED
ON / OFF
PHONES
CDR77X AUDIO CD RECORDER
INSTALLATION
Connections general
Analog connections
For recording the following inputs are present:
- Digital optical input.
- Digital coaxial input.
Analog connection is required for playback of CDs (use cable
2) and for recording from external analog sources
(use cable 1).
- Analog input.
For playback the following outputs are present:
- Digital coaxial output.
- Analog output.
We advise you to connect these to the CD input on your
amplifier.
L
L
R
RECEIVER
R
IN
OUT
TAPE
2
The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.
1
CD RECORDER
L
L
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
R
R
IN
OUT
ANALOG
IN
DIGITAL
OUT
IN
OPTICAL
(The digital optical connection is less sensitive to external
disturbances).
If your equipment does not offer digital connections, the high
quality Analog-Digital-Convertor of your CD recorder will
ensure very good audio performance when recordings are
made from the analog input.
Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.
1 For recording, connect cable 1 between the ANALOG IN-
sockets on the CD recorder and the CDR LINE- or TAPE OUT-
sockets of an amplifier.
Playback via the digital coaxial output of the CD recorder
gives the best audio performance.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Convertor of the CD recorder ensures a
very good sound quality via the analog output.
Note: For recording directly from a CD player, the analog
input of the CD recorder should be connected to the
analog output of the CD player.
We advise you to always establish both digital and analog
connections. In this way you can always make analog
recordings when digital recording is not possible.
2 For playback, connect cable 2 between the ANALOG OUT-
sockets on the CD recorder and the input sockets of an
amplifier e.g. TAPE IN, CDR or AUX.
We have described the most common ways of connecting the
CD recorder. If you still have difficulties with the connections
you can always contact the Philips Consumer Service desk in
your country.
Note: Never use the PHONO input.
11
INSTALLATION
Digital coaxial connections
Digital optical connections
Digital coaxial connection is only required in case you wish to
record from a CD player with a digital coaxial output.
Digital optical connection is only required in case you wish to
record from a CD player with a digital optical output.
L
RECEIVER
L
RECEIVER
L
L
R
R
R
R
IN
IN
OUT
OUT
2
TAPE
2
TAPE
1
1
L
L
L
L
CD RECORDER
CD RECORDER
R
R
R
R
IN
IN
OUT
OUT
ANALOG
IN
ANALOG
IN
OUT
OUT
DIGITAL
GITAL
I
IN
OPTAL
OPTICAL
3
4
L
L
CD PLA
CD PLA
R
YER
OUT
R
YER
OUT
ANALOG
OUT
ANALOG
OUT
DIGITAL
OUT
DIGITAL
OUT
OPTICAL
OPTICAL
Use the digital coaxial cable supplied.
When connecting the Digital
Optical cable, make sure it
is fully inserted until
1 For recording, connect the cable 3 between the DIGITAL
IN-socket on the CD recorder and the DIGITAL OUT-socket of
a CD player.
there is a click.
Note: Your CD recorder is equipped with a digital coaxial
output. This output can be used for digital playback.
1 Remove the dust caps from the digital optical connection.
(We recommend you save the cap).
2 For recording, connect a fibre-optic cable 4 between the
digital optical input of the CD recorder and the digital-
optical output of a CD player.
Note: For playback, the digital coaxial output or analog output
should be connected to an amplifier.
12
INSTALLATION
Power supply
Inserting batteries in the remote control
1 Plug the power cord supplied into the MAINS connector on
the CD recorder, then into a mains socket.
2 Press ON/OFF.
➜The CD recorder will switch on.
1 Open the battery compartment cover.
Note:
2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as
shown.
- If the CD recorder is in Standby mode (red led on), press any
key to activate the recorder.
- The CD recorder will automatically adjust to the local mains
voltage.
- When the CD recorder is in the ‘OFF’ position, it is still
consuming some power. If you wish to disconnect your
player completely from the mains, withdraw the plug from
the AC outlet.
3 Replace the cover.
Note: We recommend you use 2 batteries of the same type
and condition.
Batteries contain chemical substances, so they should
be disposed of properly.
Setup recommendations
- Place the CD recorder on a solid, vibration free surface.
- Do not place the CD recorder near a source of heat or in
direct sunlight.
- Do not use the CD recorder under extremely damp
conditions.
- If the CD recorder is placed in a cabinet, make sure that a
2.5 cm space remains free on all sides of the CD recorder
for proper ventilation.
Important:
- Do not put the CD recorder on top of other equipement that
heats up the CD recorder (e.g. receiver or amplifier).
13
|