Nokia 7360 User Manual

Nokia 7360 User Guide

9243654

Issue 1

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and

noncommercial use in connection with information which has been encoded in compliance with the

MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use

in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be

implied for any other use. Additional information, including that related to promotional, internal, and

commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

This device may contain commodities, technology or software subject to export laws and regulations from

the US and other countries. Diversion contrary to law is prohibited.

9243654/Issue 1

Contents

For your safety ..................................................................................................... 9

General information.......................................................................................... 13

Overview of functions............................................................................................................................. 13

Access codes.............................................................................................................................................. 14

Configuration settings service.............................................................................................................. 15

Download content and applications................................................................................................... 16

Nokia support and contact information............................................................................................ 16

1.Get started..................................................................................................... 17

Install the SIM card and battery.......................................................................................................... 17

Charge the battery................................................................................................................................... 19

Switch the phone on and off................................................................................................................ 20

Antenna....................................................................................................................................................... 21

Wrist strap.................................................................................................................................................. 21

2.Your phone..................................................................................................... 22

Keys and parts........................................................................................................................................... 22

Standby mode............................................................................................................................................ 23

Keypad lock (keyguard)........................................................................................................................... 26

3.Call functions ................................................................................................ 27

Make a call................................................................................................................................................. 27

Answer or reject a call............................................................................................................................ 28

Options during a call............................................................................................................................... 28

4.Write text....................................................................................................... 30

Settings ....................................................................................................................................................... 30

Predictive text input................................................................................................................................ 31

Traditional text input .............................................................................................................................. 32

5.Navigate the menus ...................................................................................... 33

6.Messages........................................................................................................ 34

Text messages (SMS)............................................................................................................................... 34

Multimedia messages (MMS)................................................................................................................ 37

Memory full................................................................................................................................................ 40

Folders.......................................................................................................................................................... 40

Flash messages.......................................................................................................................................... 41

Nokia Xpress audio messaging............................................................................................................. 42

Instant messaging (IM)........................................................................................................................... 43

E-mail application.................................................................................................................................... 49

Voice messages......................................................................................................................................... 52

Info messages............................................................................................................................................ 52

Service commands.................................................................................................................................... 53

Delete messages........................................................................................................................................ 53

Message settings...................................................................................................................................... 53

Message counter....................................................................................................................................... 56

7.Contacts ......................................................................................................... 57

Search for a contact................................................................................................................................ 57

Save names and phone numbers ......................................................................................................... 57

Save numbers, items, or an image....................................................................................................... 57

Copy contacts............................................................................................................................................ 58

Edit contact details.................................................................................................................................. 59

Delete contacts or contact details ...................................................................................................... 59

Business cards........................................................................................................................................... 60

My presence............................................................................................................................................... 60

Subscribed names..................................................................................................................................... 61

Settings ....................................................................................................................................................... 63

Groups.......................................................................................................................................................... 63

Voice dialing .............................................................................................................................................. 64

Speed dials.................................................................................................................................................. 65

Info, service, and my numbers.............................................................................................................. 66

8.Call register.................................................................................................... 67

Recent calls lists....................................................................................................................................... 67

Counters and timers ................................................................................................................................ 67

9. Settings......................................................................................................... 68

Profiles......................................................................................................................................................... 68

Themes......................................................................................................................................................... 68

Tones............................................................................................................................................................ 69

My shortcuts.............................................................................................................................................. 69

Display......................................................................................................................................................... 70

Time and date............................................................................................................................................ 71

Call................................................................................................................................................................ 71

Phone........................................................................................................................................................... 72

Connectivity............................................................................................................................................... 74

Enhancements........................................................................................................................................... 76

Configuration............................................................................................................................................. 77

Security........................................................................................................................................................ 78

Restore factory settings.......................................................................................................................... 79

10. Operator menu............................................................................................ 80

11. Gallery ......................................................................................................... 81

12. Media........................................................................................................... 82

Camera......................................................................................................................................................... 82

Radio............................................................................................................................................................ 83

Recorder...................................................................................................................................................... 85

13. Organiser..................................................................................................... 86

Alarm clock................................................................................................................................................. 86

Calendar...................................................................................................................................................... 87

To-do list..................................................................................................................................................... 88

Notes............................................................................................................................................................ 88

Synchronization........................................................................................................................................ 89

Calculator ................................................................................................................................................... 91

Stopwatch................................................................................................................................................... 92

Countdown timer...................................................................................................................................... 93

14. Applications ................................................................................................ 94

Games.......................................................................................................................................................... 94

Collection.................................................................................................................................................... 95

15. Push to talk................................................................................................. 97

Push to talk menu .................................................................................................................................... 98

Connect to and disconnect PTT............................................................................................................ 98

Make and receive a PTT call .................................................................................................................. 99

Callback requests................................................................................................................................... 101

Add a one-to-one contact.................................................................................................................. 103

Create and set up groups.................................................................................................................... 103

PTT settings............................................................................................................................................. 106

16. Web............................................................................................................ 108

Set up browsing..................................................................................................................................... 108

Connect to a service............................................................................................................................. 108

Browse pages.......................................................................................................................................... 109

Appearance settings............................................................................................................................. 111

Cookies ..................................................................................................................................................... 112

Scripts over secure connection.......................................................................................................... 112

Bookmarks............................................................................................................................................... 112

Download files........................................................................................................................................ 113

Service inbox........................................................................................................................................... 114

Cache memory........................................................................................................................................ 115

Browser security .................................................................................................................................... 115

Positioning information....................................................................................................................... 118

17. SIM services .............................................................................................. 120

18. PC connectivity......................................................................................... 121

Nokia PC Suite........................................................................................................................................ 121

Packet data, HSCSD, and CSD............................................................................................................ 121

Data communication applications.................................................................................................... 122

19. Battery information.................................................................................. 123

Charging and discharging................................................................................................................... 123

Nokia battery authentication guidelines........................................................................................ 124

Care and maintenance.................................................................................... 127

Additional safety information........................................................................ 129

Index................................................................................................................. 134

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do

not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times

as needed to clear the display and return to the start screen. Enter the

emergency number, then press the call key. Give your location. Do not end the

call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900 and GSM

1800 and 1900 networks. Contact your service provider for more information about

networks.

When using the features in this device, obey all laws and respect the privacy and legitimate

rights of others.

Warning: To use any features in this device, other than the alarm clock, the device

must be switched on. Do not switch the device on when wireless device use may

cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

network services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize network services. Your

service provider may need to give you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that affect how you can use

network services. For instance, some networks may not support all language-dependent

characters and services.

Your service provider may have requested that certain features be disabled or not activated

in your device. If so, they will not appear on your device menu. Your device may also have

been specially configured for your network provider. This configuration may include changes

in menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some

features of this device, such as text messages, multimedia messages, audio messages,

instant messaging service, e-mail, presence enhanced contacts, mobile Internet services,

content and application download, and synchronization with a remote Internet server,

require network support for these technologies.

■ Shared memory

The phone has two memories. The following features may share the first memory: contacts,

text messages, multimedia messages (but no attachments), audio messages, instant

messaging, groups, voice commands, calendar, and to-do notes. The second shared memory

is used by files stored in Gallery, attachments of multimedia messages, e-mail, and Java^TM

applications. Use of one or more of these features may reduce the memory available for the

remaining features sharing memory. For example, saving many Java applications may use all

of the available memory. Your device may display a message that the memory is full when

you try to use a shared memory feature. In this case, delete some of the information or

entries stored in the shared memory features before continuing. Some of the features, such

as text messages, may have a certain amount of memory specially allotted to them in

addition to the memory shared with other features.

■ Enhancements

A few practical rules about accessories and enhancements:

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp and pull

the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and are operating

properly.

Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Overview of functions

Your phone provides many functions that are practical for daily use, such as a

calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also

supports the following functions:

• Enhanced data rates for GSM evolution (EDGE). See Packet data (EGPRS) p. 75.

• Extensible hypertext markup language (XHTML). See Web p. 108.

• Audio messaging. See Nokia Xpress audio messaging p. 42.

• Instant messaging. See Instant messaging (IM) p. 43.

• E-mail application. See E-mail application p. 49.

• Push to talk. See Push to talk p. 97.

• Presence-enhanced contacts. See My presence p. 60.

• Java 2 Platform, Micro Edition (J2ME^TM). See Applications p. 94.

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against

unauthorized use. The preset code is 12345. To change the code, and to set the

phone to request the code, see Security p. 78.

PIN codes

The personal identification number (PIN) code and the universal personal

identification number (UPIN) code (4 to 8 digits) help to protect your SIM card

against unauthorized use. See Security p. 78.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for

some functions.

The module PIN is required to access the information in the security module. See

Security module p. 116.

The signing PIN is required for the digital signature. See Digital signature p. 118.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key

(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,

respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If

the codes are not supplied with the SIM card, contact your local service provider

for the codes.

Barring password

The barring password (4 digits) is required when using the Call barring service. See

Security p. 78.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, MMS, Nokia

Xpress audio messaging, or remote Internet server synchronization, your phone

needs the correct configuration settings. You may be able to receive the settings

directly as a configuration message. After receiving the settings you need to save

them on your phone. The service provider may provide a PIN that is needed to save

the settings. For more information on availability, contact your network operator,

service provider, nearest authorized Nokia dealer, or visit the support area on the

Nokia Web site, <www.nokia.com/support>.

When you have received a configuration message Configuration sett. received is

displayed.

To save the settings, select Show > Save. If the phone requests Enter settings'

PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code,

contact the service provider that supplies the settings. If no settings are saved yet,

these settings are saved and set as default configuration settings. Otherwise, the

phone asks Activate saved configuration settings?.

To discard the received settings, select Exit or Show > Discard.

To edit the settings, see Configuration p. 77.

■ Download content and applications

You may be able to download new content (for example, themes) to the phone

(network service). Select the download function (for example, in the Gallery

menu). To access the download function, see the respective menu descriptions. For

the availability of different services, pricing, and tariffs, contact your service

provider.

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

■ Nokia support and contact information

Check www.nokia.com/support or your local Nokia Web site for the latest version

of this guide, additional information, downloads, and services related to your

Nokia product.

On the Web site, you can get information on the use of Nokia products and

services. If you need to contact customer service, check the list of local Nokia

contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center at

www.nokia.com/repair.

1. Get started

■ Install the SIM card and battery

Always switch the device off and disconnect the charger before removing the battery.

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM card vendor.

This may be the service provider, network operator, or other vendor.

This device is intended for use with the BL-5B battery.

The SIM card and its contacts can easily be damaged by scratches or bending, so

be careful when handling, inserting, or removing the card.

To remove the back cover of the phone, press the

release button (1), and lift the back cover (2).

Ensure, that the golden contact area on the SIM card

is facing downwards, and insert the SIM card into

the SIM card holder until it snaps into position (3).

Insert the battery (4). Observe the battery contacts.

Always use original Nokia batteries. See Nokia

battery authentication guidelines p. 124.

Align the top of the back cover with the top of the

phone (5), and press the bottom of the back cover to

lock it (6).

To remove the battery, lift the lower end of the

battery out of the compartment (7).

To remove the SIM card, press the SIM card release

(8), and slide the SIM card towards the top of the

phone (9).

■ Charge the battery

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from an AC-3, AC-4, and DC-4 charger, and from an AC-1,

ACP-7, ACP-12, and LCH-12 charger when used with the CA-44 charger adapter.

For availability of approved enhancements, please check with your dealer.

When you disconnect the power cord of any enhancement, grasp and pull the plug, not the

cord.

1. Connect the charger to a wall socket.

2. Connect the lead from the charger to the socket on

the bottom of your phone.

If the battery is completely discharged, it may take a

few minutes before the charging indicator appears on the display or before any

calls can be made.

The charging time depends on the charger and the battery used. For example,

charging a BL-5B battery with the AC-3 charger takes about 1 hour and 10

minutes while the phone is in the standby mode.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

To switch the phone on, press and hold the power key.

If the phone asks for a PIN or a UPIN code, enter the code

(displayed as ****), and select OK.

To switch the phone off, press and hold the power key.

Plug and play service

When you switch on your phone for the first time, and the phone is in the standby

mode, you are asked to get the configuration settings from your service provider

(network service). Confirm or decline the query. See "Connect to service provider

support ," p. 78 and Configuration settings service p. 15.

■ Antenna

Your device has an internal antenna.

Note: As with any other radio transmitting

device, do not touch the antenna unnecessarily

when the device is switched on. Contact with

the antenna affects call quality and may cause

the device to operate at a higher power level

than otherwise needed. Avoiding contact with

the antenna area when operating the device

optimizes the antenna performance and the

battery life.

■ Wrist strap

To attach the wrist strap at the upper right edge of the

phone, thread the strap through the eyelet as shown in

the picture, and tighten it.

2. Your phone

■ Keys and parts

•

Power key (1)

Earpiece (2)

Loudspeaker (3)

Display (4)

Volume up and Push to talk (PTT) key (5)

Volume down and voice command key (6)

Infrared (IR) port (7)

Middle selection key (8)

4-way navigation key (9)

Left selection key (10)

Right selection key (11)

Call key (12)

End key (13)

Keypad, may vary by region (14)

Charger connector (15)

Microphone (16)

Pop-Port^TMconnector (17)

Camera lens (18)

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the

phone is in the standby mode.

1 Name of the network or operator logo

2 Signal strength of the cellular network

3 Battery charge level

4 Left selection key (Go to)

5 Middle selection key (Menu)

6 Right selection key (Names)

The right selection key may be another shortcut to a

function that you selected. See My shortcuts p. 69.

Operator variants may have an operator-specific name to access an operator-

specific Web site.

Personal shortcut list

The left selection key is Go to. To view the functions in the personal shortcut list,

select Go to. To activate a function, select it.

To view a list with available functions, select Go to > Options > Select options. To

add a function to the shortcut list, select Mark. To remove a function from the list,

select Unmark.

To rearrange the functions on your personal shortcut list, select Go to >

Options > Organise. Select the desired function, Move, and the place where you

want to move the function.

Shortcuts in standby mode

• To access the list of dialed numbers, press the call key once. Scroll to a number

or name; to call the number, press the call key.

• To open the Web browser, press and hold 0.

• To call your voice mailbox, press and hold 1.

• Use the navigation key as a shortcut. See My shortcuts p. 69.

Power saving

A digital clock view overwrites the display when no function of

the phone has been used for a certain period of time. To

activate the power saver, see Power saver in Display p. 70. To

deactivate the screen saver, press any key.

Indicators

You received one or several text or picture messages. See Read and reply

to a SMS message p. 35.

You received one or several multimedia messages. See Read and reply to a

MMS message p. 39.

For e-mail and voice messages different icons may appear.

The phone registered a missed call. See Call register p. 67.

The keypad is locked. See Keypad lock (keyguard) p. 26.

The phone does not ring for an incoming call or text message when

Incoming call alert and Message alert tone are set to Off. See Tones p. 69

The alarm clock is set to On. See Alarm clock p. 86.

he packet data connection mode Always online is selected, and the packet

data service is available. See Packet data (EGPRS) p. 75.

A packet data connection is established. See Packet data (EGPRS) p. 75

and Browse pages p. 109.

The packet data connection is suspended (on hold), for example, if there is

an incoming or outgoing call during a packet data dial-up connection.

When the infrared connection is activated, the indicator is shown

continuously.

Push to talk connection is active or suspended. See Push to talk p. 97.

■ Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and press *

within 3.5 seconds to lock the keypad.

To unlock the keypad, select Unlock, and press * within 1.5 seconds. If the Security

keyguard is set On, enter the security code if requested.

To answer a call when the keyguard is on, press the call key. When you end or

reject the call, the keypad automatically locks.

For Automatic keyguard and Security keyguard. See Phone p. 72.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device.

3. Call functions

■ Make a call

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the +

character replaces the international access code) and then enter the country

code, the area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key.

To make a call using names, search for a name or phone number in Contacts, see

Search for a contact p. 57. Press the call key to call the number.

To access the list of up to 20 dialed numbers, press the call key once in the standby

mode. To call the number, select a number or name, and press the call key.

Speed dialing

Assign a phone number to one of the speed-dialing keys, 2 to 9. See Speed dials

p. 65. Call the number in either of the following ways:

• Press a speed-dialing key, and then press the call key.

• If Speed dialling is set to On, press and hold a speed-dialing key until the call

begins. See Speed dialling in Call p. 71.

■ Answer or reject a call

To answer an incoming call, press the call key. To end the call, press the end key.

To reject an incoming call, press the end key.

To mute the ringing tone select Silence.

Tip: If the Divert if busy function is activated to divert the calls (for

example, to your voice mailbox) rejecting an incoming call also diverts the

call. See Call p. 71.

If a compatible headset supplied with the headset key is connected to the phone,

to answer and end a call, press the headset key.

Call waiting

To answer the waiting call during an active call, press the call key. The first call is

put on hold. To end the active call, press the end key.

To activate the Call waiting function, see Call p. 71.

■ Options during a call

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

Many of the options that you can use during a call are network services. For

availability, contact your network operator or service provider.

During a call, select Options and from the following options:

Call options are Mute or Unmute, Contacts, Menu, Auto volume on or Auto volume

off, Record, Lock keypad, Audio enhancing, Loudspeaker, or Handset.

Network services options are Answer and Reject, Hold or Unhold, New call, Add to

conference, End call, End all calls, and the following:

Send DTMF — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer — to connect a call on hold to an active call and disconnect yourself

Conference — to make a conference call that allows up to five persons to take part

in a conference call

Private call — to discuss privately in a conference call

4. Write text

You can enter text (for example, when writing messages) using traditional or

predictive text input. When using traditional text input, press a number key, 1 to

9, repeatedly until the desired character appears. In predictive text input you can

enter a letter with a single keypress.

When you are writing text, predictive text input is indicated by

traditional text input by at the top left of the display.

and

, or

appear next to the text input indicator, indicating the character case.

To change the character case and the text input mode, press #.

indicates number mode. To change from the letter to number mode, press

and hold #, and select Number mode. To insert a special character, press and hold

■ Settings

To set the writing language, select Options > Writing language. Predictive text

input is only available for the languages listed.

Select Options > Dictionary on to set the predictive text input or Dictionary off to

set traditional text input.

■ Predictive text input

Predictive text input is based on a built-in dictionary to which you can add new

words.

1. Start writing a word using the 2 to 9 keys. Press each key only once for a single

letter. The word changes after each keypress.

2. When you have finished writing the word and it is correct, to confirm it, press 0

to add a space, or press any of the navigation keys. Press a navigation key to

move the cursor.

If the word is not correct, press * repeatedly, or select Options > Matches.

When the word that you want appears, confirm it.

If ? is displayed after the word, the word you intended to write is not in the

dictionary. To add the word to the dictionary, select Spell. Enter the word

(traditional text input is used), and select Save.

To enter a full stop, press 1.

3. Start writing the next word.

Write compound words

Enter the first part of the word, and press the navigation key right to confirm it.

Write the last part of the word, and confirm the word.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all

characters available under a number key are printed on the key. The characters

available depend on the writing language. See Settings p. 30.

If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press any of the navigation keys and enter the letter.

The most common punctuation marks and special characters are available under

the 1 key.

5. Navigate the menus

The phone offers you an extensive range of functions, which are grouped into

menus.

1. To access the menu, select Menu. To change the menu view, select Options >

Main menu view > List or Grid.

2. Scroll through the menu, and select a submenu (for example, Settings).

3. If the menu contains submenus, select the one that you want (for example,

Call).

4. If the selected menu contains further submenus, select the one that you want

(for example, Anykey answer).

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select Exit.

6. Messages

The message services can only be used if they are supported by your

network or your service provider.

Note: When sending messages, your phone may display Message sent. This is an

indication that the message has been sent by your device to the message centre

number programmed into your device. This is not an indication that the message

has been received at the intended destination. For more details about messaging

services, check with your service provider.

Important: Exercise caution when opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

Only devices that have compatible features can receive and display messages. The

appearance of a message may vary depending on the receiving device.

■ Text messages (SMS)

Using the short message service (SMS) you can send and receive multipart

messages made of several ordinary text messages (network service) that can

contain pictures.

Before you can send any text, picture, or e-mail message, you must save your

message center number. See Message settings p. 53.

To check SMS e-mail service availability and to subscribe to the service, contact

your service provider.

Your device supports the sending of text messages beyond the character limit for a single

message. Longer messages will be sent as a series of two or more messages. Your service

provider may charge accordingly. Characters that use accents or other marks, and characters

from some language options like Chinese, take up more space limiting the number of

characters that can be sent in a single message.

Write and send a SMS message

1. Select Menu > Messages > Create message > Text message.

2. Enter a message. See Write text p. 30.

At the top of the display, you can see the message length indicator that tracks

the number of characters available. For example, 10/2 means that you can still

add 10 characters for the text to be sent as two message.

To insert text templates or a picture into the message, see Templates p. 36.

Each picture message comprises several text messages. Sending one picture or

multipart message may cost more than sending one text message.

3. To send the message, select Send > Recently used, To phone number, To many,

or To e-mail address. To send a message using a predefined message profile,

select Via sending profile. For the message profile, see Text and SMS e-mail

p. 53. Select or enter a phone number or e-mail address, or select a profile.

Read and reply to a SMS message

is shown when you received an SMS message or an SMS e-mail. The blinking

indicates that the message memory is full. Before you can receive new

messages, delete some of your old messages in the Inbox folder.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. If more than one

message is received, select the message that you want to read.

indicates

an unread message.

2. While reading a message, select Options and delete or forward the message;

edit the message as a text message or an SMS e-mail; rename the message you

are reading or move it to another folder; or view or extract message details.

You can also copy text from the beginning of the message to your phone

calendar as a reminder note. To save the picture in the Templates folder when

reading a picture message, select Save picture.

3. To reply as a message, select Reply > Text message, Multimedia msg., Flash

message, or Audio message. Enter the reply message. When replying to an

e-mail, first confirm or edit the e-mail address and subject.

4. To send the message to the displayed number, select Send > OK.

Templates

Your phone has text templates

and picture templates

that you can use in

text, picture, or SMS e-mail messages.

To access the template list, select Menu > Messages > Saved items > Text

messages > Templates.

■ Multimedia messages (MMS)

A multimedia message can contain text, sound, a picture, a calendar note, a

business card, or a video clip. If the message is too large, the phone may not be

able to receive it. Some networks allow text messages that include an Internet

address where you can view the multimedia message.

You cannot receive multimedia messages during a call, a game, another Java

application, or an active browsing session over GSM data. Because delivery of

multimedia messages can fail for various reasons, do not rely solely upon them for

essential communications.

Write and send a MMS message

To set the settings for multimedia messaging, see Multimedia p. 54. To check

availability and to subscribe to the multimedia messaging service, contact your

service provider.

content from being copied, modified, transferred or forwarded.

1. Select Menu > Messages > Create message > Multimedia msg..

2. Enter a message. See Write text p. 30.

To insert a file, select Options > Insert and from the following options:

Image, Sound clip, or Video clip — to insert a file from Gallery

New image — to take a new image to be added to the message

New sound clip — to make a new recording to be added to the message

Business card or Calendar note — to insert a business card or a calendar note in

the message

Slide — to insert a slide to the message. Your phone supports multimedia

messages that contain several pages (slides). Each slide can contain text, one

image, a calendar note, a business card, and one sound clip. To open a desired

slide if the message contains several slides, select Options > Previous slide,

Next slide, or Slide list. To set the interval between the slides, select Options >

Slide timing. To move the text component to the top or bottom of the message,

select Options > Place text first or Place text last.

The following options may also be available: Delete to delete an image, slide, or

sound clip from the message, Clear text, Preview, or Save message. In More

options the following options may be available: Insert contact, Insert number,

Message details, and Edit subject.

3. To send the message, select Send > Recently used, To phone number, To e-mail

address, or To many.

4. Select the contact from the list, or enter the recipient’s phone number or e-

mail address, or search for it in Contacts. Select OK. The message is moved to

the Outbox folder for sending.

While the multimedia message is being sent, the animated indicator

displayed and you can use other functions on the phone. If the sending fails,

the phone tries to resend it a few times. If this fails, the message remains in the

Outbox folder, and you can try to resend it later.

If you select Save sent messages > Yes, the sent message is saved in the Sent

items folder. See Multimedia p. 54. When the message is sent, it is not an

indication that the message has been received at the intended destination.

Read and reply to a MMS message

Important: Exercise caution when opening messages. Multimedia message

objects may contain malicious software or otherwise be harmful to your device or

PC.

When your phone receives a multimedia message, the animated

is displayed.

When the message has been received,

and the text Multimedia message

received are shown.

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. In the list of

messages,

indicates an unread message. Select the message that you want

to view.

2. The function of the middle selection key changes according to the currently

displayed attachment in the message.

To view the whole message if the received message contains a presentation, a

sound clip, or a video clip, select Play.

Select Options to access Attachments (for example a business card), and

Objects (for example images).

3. To reply to the message, select Options > Reply > Text message, Multimedia

msg., Flash message, or Audio message. Enter the reply message, and select

Send.

Select Options to access available options.

■ Memory full

When you have received a new text message and the message memory is full,

blinks and Text msgs. memory full. Delete msgs. is shown. Select No, and delete

some messages from a folder. To discard the waiting message, select Exit > Yes.

When you have a new multimedia message waiting and the memory for the

messages is full,

blinks and Multimedia memory full. View waiting msg. is

shown. To view the waiting message, select Show. Before you can save the

waiting message, delete old messages to free memory space. To save the message,

select Save.

To discard the waiting message, select Exit > Yes. If you select No, you can view

the message.

■ Folders

The phone saves received text and multimedia messages in the Inbox folder.

Multimedia messages that have not yet been sent are moved to the Outbox folder.

If you have selected Message settings > Text messages > Save sent messages >

Yes, and Message settings > Multimedia msgs. > Save sent messages > Yes, the

sent messages are saved in the Sent items folder.

To save the text message that you are writing and wish to send later in the Saved

items folder, select Options > Save message > Saved text msgs.. For multimedia

messages, select the option Save message.

indicates unsent messages.

To organize your text messages, you can move some of them to My folders or add

new folders for your messages. Select Messages > Saved items > Text messages >

My folders.

To add a folder, select Options > Add folder. If you have not saved any folders,

select Add.

To delete or rename a folder, scroll to the desired folder, and select Options >

Delete folder or Rename folder.

■ Flash messages

Flash messages are text messages that are instantly displayed upon reception.

Write a flash message

Select Menu > Messages > Create message > Flash message. Write your message.

The maximum length of a flash message is 70 characters. To insert a blinking text

into the message, select Insert blink char. from the options list to set a marker. The

text after the marker blinks until a second marker is inserted.

Receive a flash message

A received flash message is not automatically saved. To read the message, select

Read. To extract phone numbers, e-mail addresses, and Web site addresses from

the current message, select Options > Use detail. To save the message, select Save

and the folder in which you want to save the message.

■ Nokia Xpress audio messaging

With this menu, use the multimedia message service to create and send a voice

message in a convenient way. Multimedia messaging service must be activated

before this service can be used.

Create and send an audio message

1. Select Menu > Messages > Create message > Audio message. The recorder

opens. To use the recorder, see Recorder p. 85.

2. When the message is ready to send, select Options > Play to check the

message before sending, Replace sound clip to repeat the recording, Save

message, Save sound clip to save the recording in Gallery, Edit subject to insert

a subject to the message, Message details to view the message details, or

Loudspeaker or Handset.

3. To send the message, select Send > Recently used, To phone number, To e-mail

address, or To many. Depending on your operator, more options may be

available.

4. Select the contact from the list, enter the recipient’s phone number or e-mail

address, or search for it in Contacts. Select OK, and the message is moved to

the Outbox folder for sending.

Receive an audio message

When your phone is receiving an audio message, 1 audio message received is

shown. Select Show to open the message or select Show > Play if there is more

than one message received. Select Options to see the available options. To listen

to the message later, select Exit.

To save the message, select Options > Save sound clip and the folder in which you

want to save the message.

■ Instant messaging (IM)

Instant messaging (network service) is a way to send short, simple text messages

to online users.

Before you can use instant messaging, you must subscribe to the service. To check

the availability and costs, and to subscribe to the service, contact your network

operator or service provider, from whom you also receive your unique ID,

password, and settings.

To set the required settings for the instant messaging service, see Connect.

settings in Access the IM menu p. 44. The icons and texts on the display may vary,

depending on the instant messaging service.

Depending on the network, the active instant messaging conversation may

consume the phone battery faster, and you may need to connect the phone to a

charger.

Access the IM menu

To access the menu while still offline, select Menu > Messages > Instant

messages. If more than one set of connection settings for the instant messaging

service is available, select the desired one. If there is only one set defined, it is

selected automatically.

The following options are shown:

Saved convers. — to view, erase or, rename the instant messaging conversations

that you have saved during the instant messaging session

Connect. settings — to edit the settings needed for messaging and presence

connection

Connect to the IM service

To connect to the instant messaging service, open the Instant messages menu,

activate an instant messaging service, and select Login. When the phone has

successfully connected, Logged in is displayed.

To disconnect from the instant messaging service, select Logout.

Start an IM session

Open the Instant messages menu, and connect to the service. Start the service in

different ways.

• Select Conversations to view the list of new and read instant messages or

invitations for instant messaging during the active instant messaging session.

Scroll to the message or invitation that you want, and select Open to read the

message.

indicates the new and

read group messages.

indicates the new and

the read instant messages.

indicates the invitations.

The icons and texts on the display may vary, depending on the instant

messaging service.

• Select IM contacts to view the contacts that you have added. Scroll to the

contact with whom you would like to chat, and select Chat or Open if a new

contact is shown in the list. To add contacts, see Contacts for IM p. 47.

indicates the online and

memory. indicates a blocked contact.

been sent a new message.

the offline contacts in the phone contacts

indicates a contact that has

• Select Groups > Public groups to display the list of bookmarks to public groups

provided by the network operator or service provider. To start an instant

messaging session with a group, scroll to a group, and select Join. Enter your

screen name that you want to use in the conversation. When you have

successfully joined the group conversation, you can start a group conversation.

To create a private group, see Groups p. 48.

• Select Search > Users or Groups to search for other instant messaging users or

public groups on the network by phone number, screen name, e-mail address,

or name. If you select Groups, you can search for a group by a member in the

group or by group name, topic, or ID.

To start the conversation when you have found the user or the group that you

want, select Options > Chat or Join group.

To start a conversation from Contacts, see View the subscribed names p. 62.

Accept or reject an invitation

In the standby mode, when you are connected to the instant messaging service

and you receive a new invitation, New invitation received is displayed. To read it,

select Read. If more than one invitation is received, scroll to the invitation you

want, and select Open. To join the private group conversation, select Accept, and

enter the screen name; or to reject or delete the invitation, select Options >

Reject or Delete.

Read a received instant message

In the standby mode, when you are connected to the instant messaging service,

and you receive a new message that is not a message associated with an active

conversation, New instant message is displayed. To read it, select Read. If you

receive more than one message, scroll to the message, and select Open.

New messages received during an active conversation are held in Instant

messages > Conversations. If you receive a message from someone who is not in

IM contacts, the sender ID is displayed. To save a new contact that is not in the

phone memory, select Options > Save contact.

Participate in a conversation

To join or start an instant messaging session, select Write. Write your message,

and select Send or press the call key to send it.

Select Options to access available options: View conversation, Save contact,

Group members, Block contact, and End conversation.

Edit your availability status

1. Open the Instant messages menu, and connect to the instant messaging

service.

2. To view and edit your own availability information or screen name, select My

settings.

3. To allow all the other instant messaging users to see you when you are online,

select Availability > Available for all.

To allow only the contacts on your instant messaging contact list to see you

when you are online, select Availability > Avail. for contacts.

To appear as being offline, select Availability > Appear offline.

When you are connected to the instant messaging service,

are online, and indicates that you are not visible to others.

indicates that you

Contacts for IM

To add contacts to the instant messaging contacts list, connect to the instant

messaging service, and select IM contacts. To add a contact to the list, select

Options > Add contact, or if you have no contacts added, select Add. Select Enter

ID manually, Search from serv., Copy from server, or By mobile number.

Scroll to a contact, and to start a conversation, select Chat or Options > Contact

info, Block contact or Unblock contact, Add contact, Remove contact, Change list,

Copy to server, or Availability alerts.

Block and unblock messages

To block messages, connect to the instant messaging service, and select

Conversations > IM contacts; or join or start a conversation. Scroll to the contact

from whom you want to block incoming messages, and select Options > Block

contact > OK.

To unblock the messages, connect to the instant messaging service, and select

Blocked list. Scroll to the contact from whom you want to unblock the messages,

and select Unblock.

Groups

You can create your own private groups for an instant messaging conversation, or

use the public groups provided by the service provider. The private groups exist

only during an instant messaging conversation. The groups are saved on the server

of the service provider. If the server you are logged on to does not support group

services, all group-related menus are dimmed.

Public groups

You can bookmark public groups that your service provider may maintain.

Connect to the instant messaging service, and select Public groups. Scroll to a

group with which you want to chat, and select Join. If you are not in the group,

enter your screen name as your nickname for the group. To delete a group from

your group list, select Options > Delete group.

To search for a group, select Groups > Public groups > Search groups. You can

search for a group by a member in the group, group name, topic, or ID.

Private groups

Connect to the instant messaging service, and select Groups > Create group. Enter

the name for the group and the screen name that you want to use. Mark the

private group members in the contacts list, and write an invitation.

■ E-mail application

The e-mail application allows you to access your compatible e-mail account from

your phone when you are not in the office or at home. This e-mail application is

different from the SMS and MMS e-mail function.

Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and

retrieve any e-mail, you may need to do the following:

• Obtain a new e-mail account or use the current one. For availability of your

e-mail account, contact your e-mail service provider.

• For the settings required for e-mail, contact your e-mail service provider. You

may receive the e-mail configuration settings as a configuration message. See

Configuration settings service p. 15. You can also enter the settings manually.

See Configuration p. 77.

To activate the e-mail settings, select Menu > Messages > Message settings >

E-mail messages. See E-mail p. 55.

This application does not support keypad tones.

Write and send an e-mail

1. Select Menu > Messages > E-mail > Create e-mail.

2. Enter the recipient’s e-mail address, a subject, and the e-mail message.

To attach a file to the e-mail, select Options > Attach and the file in Gallery.

3. Select Send > Send now.

Download e-mail

1. To access the e-mail application, select Menu > Messages > E-mail.

2. To download e-mail messages that have been sent to your e-mail account,

select Retrieve.

To download new e-mail messages and to send e-mail that has been saved in

the Outbox folder, select Options > Retrieve and send.

To download first the headings of the new e-mail messages that have been

sent to your e-mail account, select Options > Check new e-mail. Then, to

download the selected e-mail, mark the desired ones, and select Options >

Retrieve.

3. Select the new message in Inbox. To view it later, select Back.

indicates an unread message.

Read and reply to e-mail

Important: Exercise caution when opening messages. E-mail messages may

contain malicious software or otherwise be harmful to your device or PC.

Select Menu > Messages > E-mail > Inbox and the desired message.

While reading the message, select Options to view the available options.

To reply to an e-mail, select Reply > Empty screen or Original text. To reply to

many, select Options > Reply to all. Confirm or edit the e-mail address and

subject; then write your reply. To send the message, select Send > Send now.

Inbox and other folders

Your phone saves e-mail that you have downloaded from your e-mail account in

the Inbox folder. Other folders contains the following folders: Drafts for saving

unfinished e-mail, Archive for organizing and saving your e-mail, Outbox for

saving e-mail that has not been sent, and Sent items for saving e-mail that has

been sent.

To manage the folders and their e-mail content, select Options > Manage folder.

Delete e-mail messages

Select Menu > Messages > E-mail > Options > Manage folder and the desired

folder. Mark the messages that you want to delete. To delete them, select

Options > Delete.

Deleting an e-mail from your phone does not delete it from the e-mail server. To

set the phone to delete the e-mail also from the e-mail server, select Menu >

Messages > E-mail > Options > Extra settings > Leave copy: > Delete retr. msgs.

■ Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

details, contact your service provider.

To call your voice mailbox, select Menu > Messages > Voice messages > Listen to

voice messages. To enter, search for, or edit your voice mailbox number, select

Voice mailbox number.

If supported by the network,

indicates that there are new voice messages.

Select Listen to call your voice mailbox number.

■ Info messages

Select Menu > Messages > Info messages. With the Info messages network

service, you can receive messages on various topics from your service provider. To

check availability, topics, and the relevant topic numbers, contact your service

provider.

■ Service commands

Select Menu > Messages > Service commands. Write and send service requests

(also known as USSD commands) to your service provider, such as activation

commands for network services.

■ Delete messages

To delete all messages from a folder, select Menu > Messages > Delete messages

and the folder from which you want to delete the messages. Select Yes, and if the

folder contains unread messages, the phone asks whether you want to delete

them also. Select Yes again.

■ Message settings

Text and SMS e-mail

The message settings affect the sending, receiving, and viewing of messages.

Select Menu > Messages > Message settings > Text messages and from the

following options:

Sending profile — If more than one message profile set is supported by your SIM

card, select the set you want to change.

The following options may be available: Message centre number (delivered from

your service provider), Messages sent via, Message validity, Default recipient

number (text messages) or E-mail server (e-mail), Delivery reports, Use packet

data, Reply via same centre (network service), and Rename sending profile.

Save sent messages > Yes — Set the phone to save the sent text messages in the

Sent items folder.

Automatic resending > On — The phone automatically attempts to resend a text

message, if the sending has failed.

Multimedia

The message settings affect the sending, receiving, and viewing of multimedia

messages.

Select Menu > Messages > Message settings > Multimedia msgs. and from the

following options:

Save sent messages > Yes — to set the phone to save sent multimedia messages in

the Sent items folder

Delivery reports — to ask the network to send delivery reports about your

messages (network service)

Default slide timing — to define the default time between slides in multimedia

messages

Allow multimedia reception > Yes or No — to receive or to block the multimedia

message. If you select In home network, you cannot receive multimedia messages

when outside your home network.

Incoming multimedia messages > Retrieve, Retrieve manually, or Reject — to

allow the reception of multimedia messages automatically, manually after being

prompted, or to reject the reception

Configuration settings > Configuration — Only the configurations that support

multimedia messaging are shown. Select a service provider, Default, or Personal

config. for multimedia messaging. Select Account and a multimedia messaging

service account contained in the active configuration settings.

Allow adverts — to receive or reject advertisements. This setting is not shown if

Allow multimedia reception is set to No.

E-mail

The settings affect the sending, receiving, and viewing of e-mail.

You may receive the configuration settings for the e-mail application as a

configuration message. See Configuration settings service p. 15. You can also

enter the settings manually. See Configuration p. 77.

To activate the settings for the e-mail application, select Menu > Messages >

Message settings > E-mail messages and from the following options:

Configuration — Select the set that you want to activate.

Account — Select an account provided by the service provider.

My name — Enter your name or nickname.

E-mail address — Enter your e-mail address.

Include signature — You can define a signature that is automatically added to the

end of your e-mail when you write your message.

Reply-to address — Enter the e-mail address to which you want the replies to be

sent.

SMTP user name — Enter the name that you want to use for outgoing mail.

SMTP password — Enter the password that you want to use for outgoing mail.

Display terminal window — Select Yes to perform manual user authentication for

intranet connections.

Incoming server type — Select POP3 or IMAP4, depending on the type of e-mail

system that you use. If both types are supported, select IMAP4.

Incoming mail settings — Select available options for POP3 or IMAP4.

Font size and smileys

Select Menu > Messages > Message settings > Other settings. To change the font

size for reading and writing messages, select Font size. To replace character-based

smileys with graphical ones, select Graphical smileys > Yes.

■ Message counter

Select Menu > Messages > Message counter for approximate information on your

recent communications.

7. Contacts

You can save names and phone numbers (Contacts) in the phone

memory and in the SIM card memory.

The phone memory may save contacts with numbers and text items. You can also

save an image for a certain number of names.

Names and numbers saved in the SIM card memory are indicated by

■ Search for a contact

Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the

first letter of the name for which you are searching.

■ Save names and phone numbers

Names and numbers are saved in the used memory. Select Menu > Contacts >

Names > Options > Add new contact. Enter the name and the phone number.

■ Save numbers, items, or an image

In the phone memory for contacts, you can save different types of phone numbers

and short text items per name.

The first number you save is automatically set as the default number. It is

indicated with a frame around the number type indicator (for example,

When you select a name (for example, to make a call), the default number is used

unless you select another number.

1. Ensure that the memory in use is Phone or Phone and SIM. See Settings p. 63.

2. Scroll to the name to which you want to add a new number or text item, and

select Details > Options > Add detail.

3. To add a number, select Number and a number type.

To add another detail, select a text type or an image from Gallery.

To search for an ID from the server of your service provider if you have

connected to the presence service, select User ID > Search. See My presence

p. 60. If only one ID is found, it is automatically saved. Otherwise, to save the

ID, select Options > Save. To enter the ID, select Enter ID manually.

4. Enter the number or text item; to save it, select OK.

5. To return to the standby mode, select Back > Exit.

■ Copy contacts

Search for the contact you want to copy, and select Options > Copy. You can copy

names and phone numbers from the phone contact memory to the SIM card

memory, or vice versa. The SIM card memory can save names with one phone

number attached to them.

■ Edit contact details

1. Search for the contact you want to edit, select Details, and scroll to the desired

name, number, text item, or image.

2. To edit a name, number, or text item, or to change an image, select Options >

Edit name, Edit number, Edit detail, or Change image.

To change the number type, scroll to the desired number, and select Options >

Change type. To set the selected number as the default number, select Set as

default.

You cannot edit an ID when it is on the IM contacts or Subscribed names list.

■ Delete contacts or contact details

To delete all the contacts and the details attached to them from the phone or SIM

card memory, select Menu > Contacts > Delete all contacts > From phone mem.

or From SIM card. Confirm with the security code.

To delete a contact, search for the desired contact, and select Options > Delete

contact.

To delete a number, text item, or an image attached to the contact, search for the

contact, and select Details. Scroll to the desired detail, and select Options >

Delete > Delete number, Delete detail, or Delete image. Deleting an image from

contacts does not delete it from Gallery.

■ Business cards

You can send and receive a person’s contact information from a compatible device

that supports the vCard standard as a business card.

To send a business card, search for the contact whose information you want to

send, and select Details > Options > Send bus. card > Via multimedia, Via text

message, or Via infrared.

When you have received a business card, select Show > Save to save the business

card in the phone memory. To discard the business card, select Exit > Yes.

■ My presence

With the presence service (network service) you can share your presence status

with other users with compatible devices and access to the service. Presence

status includes your availability, status message, and personal logo. Other users

who have access to the service and who request your information are able to see

your status. The requested information is shown in Subscribed names in the

viewers’ Contacts menu. You can personalize the information that you want to

share with others and control who can see your status.

Before you can use presence, you must subscribe to the service. To check the

availability and costs, and to subscribe to the service, contact your network

operator or service provider, from whom you also receive your unique ID,

password, and the settings for the service. See Configuration p. 77.

While you are connected to the presence service, you can use the other functions

of the phone; the presence service is active in the background. If you disconnect

from the service, your presence status is shown for a certain amount of time to

viewers, depending on the service provider.

Select Menu > Contacts > My presence and from the following options:

Connect to 'My presence' service or Disconnect from service — to connect to or

disconnect from the service

View my presence — to view the status in Private pres. and Public presence

Edit my presence — to change your presence status. Select My availability, My

presence message, My presence logo, or Show to.

My viewers > Current viewers, Private list, or Blocked list

Settings > Show current presence in idle, Synchronise with profiles, Connection

type, or Presence settings

■ Subscribed names

You can create a list of contacts whose presence status information you want to

be aware of. You can view the information if it is allowed by the contacts and the

network. To view these subscribed names, scroll through the contacts or use the

Subscribed names menu.

Ensure that the memory in use is Phone or Phone and SIM. See Settings page 63.

To connect to the Presence service, select Menu > Contacts > My presence >

Connect to 'My presence' service.

Add contacts to the subscribed names

1. Select Menu > Contacts > Subscribed names.

2. If you have no contacts on your list, select Add. Otherwise, select Options >

Subscribe new. The list of your contacts is shown.

3. Select a contact from the list, and if the contact has an user ID saved, the

contact is added to the subscribed names list.

View the subscribed names

To view the presence information, see Search for a contact p. 57.

1. Select Menu > Contacts > Subscribed names.

The status information of the first contact on the subscribed names list is

displayed. The information that the person wants to give to the others may

include text and some of the following icons:

, or indicates that the person is available, not visible to others, or not

available.

indicates that the person’s presence information is not available.

2. Select Details to view the details of the selected contact; or select Options >

Subscribe new, Chat, Send message, Send bus. card, or Unsubscribe.

Unsubscribe a contact

To unsubscribe a contact from the Contacts list, select the contact and Details >

the user ID > Options > Unsubscribe > OK.

To unsubscribe, use the Subscribed names menu. See View the subscribed names

p. 62.

■ Settings

Select Menu > Contacts > Settings and from the following options:

Memory in use — to select SIM card or phone memory for your contacts. Select

Phone and SIM to recall names and number from both memories. In that case,

when you save names and numbers, they are saved in the phone memory.

Contacts view — to select how the names and numbers in contacts are displayed

Memory status — to view the free and used memory capacity

■ Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers

saved in the memory into caller groups with different ringing tones and group

images.

■ Voice dialing

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken words, such as a name, can be a voice tag. The number of

voice tags you can create is limited.

Before using voice tags, note the following:

•

Voice tags are not language-dependent. They are dependent on the speaker's voice.

You must say the name exactly as you said it when you recorded it.

Voice tags are sensitive to background noise. Record voice tags and use them in a quiet

environment.

•

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialling in all circumstances.

Add and manage voice tags

Save or copy the contacts to the phone memory for which you want to add a voice

tag. You can also add voice tags to the names in the SIM card, but if you replace

your SIM card with a new one, you must first delete the old voice tags before you

can add new ones.

1. Search for the contact to which you want to add a voice tag.

2. Select Details, scroll to the desired phone number, and select Options > Add

voice tag.

3. Select Start, and say clearly the words you want to record as a voice tag. After

recording, the phone plays the recorded tag.

appears behind the phone number with a voice tag in Contacts.

To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the

contact with the voice tag that you want, and select an option to listen to, delete,

or change the recorded voice tag.

Make a call with a voice tag

If the phone has an application running that is sending or receiving data using a

packet data connection, you must end the application before voice dialing.

1. In the standby mode, press and hold the volume down key. A short tone is

heard, and Speak now is displayed.

2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials

the phone number of the voice tag after 1.5 seconds.

If you are using a compatible headset with the headset key, press and hold the

headset key to start the voice dialing.

■ Speed dials

To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials,

and scroll to the speed-dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select

Options > Change. Select Search, the name, then the number you want to assign.

If the Speed dialling function is off, the phone asks whether you want to activate

it. See also Speed dialling in Call p. 71.

To make a call using the speed-dialing keys, see Speed dialing p. 27.

■ Info, service, and my numbers

Select Menu > Contacts and from the following functions:

Info numbers — to call the information numbers of your service provider if the

numbers are included on your SIM card (network service)

Service numbers — to call the service numbers of your service provider if the

numbers are included on your SIM card (network service)

My numbers — to view the phone numbers assigned to your SIM card, if the

numbers are included on your SIM card

8. Call register

The phone registers the phone numbers of identified missed,

received, and dialed calls; and the approximate length of your calls. Select

Menu > Call register.

The phone registers if it is switched on and within the networks service area, and

the network supports these functions.

■ Recent calls lists

When you select Options in the Missed calls, Received calls, Dialled numbers, or

Message Recipients menu, you can view the time of the call; edit, view, or call the

registered phone number; add it to the memory; or delete it from the list. You can

also send a text message. To delete the recent calls lists, select Menu > Call

■ Counters and timers

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding off for billing, taxes and so forth.

Some timers, including the life timer, may be reset during service or software

upgrades.

Select Menu > Call register > Call duration, Packet data counter, or

Packet data conn. timer for approximate information on your recent

communications.

9. Settings

■ Profiles

Your phone has various setting groups, called profiles, for which you can

customize the phone tones for different events and environments.

Select Menu > Settings > Profiles. Scroll to a profile, and select it.

To activate the selected profile, select Activate.

To set the profile to be active until a certain time up to 24 hours, select Timed, and

set the time the profile setting shall end. When the time set for the profile expires,

the previous profile that was not timed becomes active.

To personalize the profile, select Personalise. Select the setting you want to

change, and make the changes. To change your presence status information,

select My presence > My availability or My presence message. The My presence

menu is available if you set Synchronise with profiles to On. See My presence

p. 60.

■ Themes

A theme contains many elements for personalizing your phone, such as wallpaper,

screen saver, color scheme, and a ringing tone.

Select Menu > Settings > Themes and from the following options:

Select theme — to set a theme in your phone. A list of folders in Gallery opens.

Open the Themes folder, and select a theme.

Theme downloads — to open a list of links to download more themes. See

Download files p. 113.

■ Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones. Select and change Incoming call alert, Ringing

tone, Ringing volume, Vibrating alert, Push to talk settings, Message alert tone,

Instant message alert tone, Keypad tones, and Warning tones. You can find the

same settings in the Profiles menu. See Profiles p. 68.

To set the phone to ring only for calls from phone numbers that belong to a

selected caller group, select Alert for. Scroll to the caller group you want or All

calls, and select Mark.

■ My shortcuts

With personal shortcuts, you get quick access to often used functions of the

phone. To manage the shortcuts, select Menu > Settings > My shortcuts and from

the following options:

Right selection key — to select a function from the list for the right selection key.

See also Standby mode p. 23. This menu may not be shown, depending on your

service provider.

Navigation key — to select shortcut functions for the navigation key. Scroll to the

desired navigation key, select Change and a function from the list. To remove a

shortcut function from the key, select (empty). To reassign a function for the key,

select Assign. This menu may not be shown, depending on your service provider.

Voice commands — to activate phone functions by saying a voice tag. Select a

folder, scroll to a function to which you want to add a voice tag, and select Add.

indicates a voice tag. To activate a voice command, see Make a call with a

voice tag p. 65.

■ Display

Select Menu > Settings > Display and from the following options:

Wallpaper — to add the background image to the display in the standby mode. To

activate, or deactivate the wallpaper, select On, or Off. Select Select wallpaper to

select an image from the Gallery or Select slide set and a folder in the Gallery to

use the images in the folder as a slide set. To download more images for wallpaper,

select Graphic downloads.

Screen saver > On — to activate the screen saver for the main display. To set the

time after which the screen saver is activated, select Time-out. To select a graphic

for the screen saver, select Image and an image or a graphic from the Gallery.

Select Slide set and a folder in the Gallery to use the images in the folder as a slide

set. To download more images for the screen saver, select Graphic downloads.

Power saver > On — to save some battery power. A digital clock is displayed when

no function of the phone is used for a certain time.

Colour schemes — to change the color of the menu background and the signal and

battery bars

Idle state font colour — to select the color for the texts on the display in the

standby mode

Operator logo — to set your phone to display or hide the operator logo. The menu

is dimmed, if you have not saved the operator logo. For more information on

availability of an operator logo, contact your network operator or service provider.

■ Time and date

Select Menu > Settings > Time and date and from the following options:

Clock — to set the phone to show the clock in the standby mode, adjust the clock,

and select the time zone and the time format

Date — to set the phone to show the date in the standby mode, set the date, and

select the date format and date separator

Auto-update of date & time (network service) — to set the phone to automatically

update the time and date according to the current time zone

■ Call

Select Menu > Settings > Call and from the following options:

Automatic volume control — to set the phone to automatically adjust the output

volume according to the background noise

Call divert (network service) — to divert your incoming calls. You may not be able

to divert your call, if some call barring functions are active. See Call barring service

in Security p. 78.

Anykey answer > On — to answer an incoming call, briefly press any key, except

the end key and the left and right selection keys.

Automatic redial > On — to set your phone to make a maximum of 10 attempts to

connect the call after an unsuccessful call attempt

Speed dialling > On — to activate speed dialling. To set up speed dialling, see

Speed dials p. 65. To dial, press and hold the corresponding number key.

Call waiting > Activate — to set the network to notify you of an incoming call

while you have a call in progress (network service). See Call waiting p. 28.

Summary after call > On — to briefly display the approximate duration and cost

(network service) of the call after each call

Send my caller ID (network service) > Yes, No, or Set by network

Line for outgoing calls (network service) — to select the phone line 1 or 2 to make

calls, if supported by your SIM card

■ Phone

Select Menu > Settings > Phone and from the following options:

Phone language — to set the display and writing language

Memory status — to view the free memory and the used memory in Gallery,

Messages, and Applications

Automatic keyguard — to set the keypad of your phone to lock automatically after

a preset time delay when the phone is in the standby mode and no function of the

phone has been used. Select On, and you can set the time from 5 seconds to 60

minutes.

Security keyguard — to set the phone to ask for the security code when you unlock

the keyguard. Enter the security code, and select On.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device.

Cell info display > On — to receive information from the network operator

depending on the network cell used (network service)

Welcome note — to enter a welcome note to be shown briefly when the phone is

switched on

Operator selection > Automatic — to set the phone automatically to select one of

the cellular networks available in your area. With Manual, you can select a

network that has a roaming agreement with your home network operator.

Confirm SIM service actions — See SIM services p. 120.

Help text activation — to select whether the phone shows help texts

Start-up tone — to select whether the phone plays a start-up tone when the

phone is switched on

■ Connectivity

You can connect your phone to compatible devices using an infrared connection.

You can also define the settings for packet data dial-up connections.

Infrared

You can set up the phone to send and receive data through its infrared (IR) port. To

use an IR connection, the device with which you want to establish a connection

must be IrDA compliant. You can send or receive data to or from a compatible

phone or data device (for example, a computer) through the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eyes or allow it to interfere with other IR

devices. Infrared devices are Class 1 laser products.

When sending or receiving data, ensure that the IR ports of the sending and

receiving devices are pointing at each other and that there are no obstructions

between the devices.

To activate the IR port of your phone to receive data using IR, select Menu >

Settings > Connectivity > Infrared.

To deactivate the IR connection, select Menu > Settings > Connectivity >

Infrared. When the phone displays Deactivate infrared?, select Yes.

If data transfer is not started within 2 minutes after the activation of the IR port,

the connection is canceled and must be started again.

IR connection indicator

When

is shown continuously, the IR connection is activated, and your phone

is ready to send or receive data through its IR port.

When

blinks, your phone is trying to connect to the other device, or a

connection has been lost.

Packet data (EGPRS)

Enhanced general packet radio service (EGPRS), packet data, is a network service

which allows mobile phones to send and receive data over an Internet protocol

(IP)-based network. It enables wireless access to data networks such as the

Internet.

The applications that may use packet data are MMS, browsing sessions, e-mail,

remote SyncML, Java application downloading, push to talk, instant messaging,

and the PC dial-up.

To define how to use the service, select Menu > Settings > Connectivity > Packet

data > Packet data connection.

Select When needed to set the packet data connection to be established when an

application needs it. The connection will be closed when the application is

terminated.

Select Always online to set the phone to automatically connect to an packet data

network when it is switched on.

indicates a packet data connection.

Modem settings

You can connect the phone using an IR or a data cable (CA-42) connection to a

compatible PC, and use the phone as a modem to enable packet data connectivity

from the PC.

To define the settings for connections from the PC, select Menu > Settings >

Connectivity > Packet data > Packet data settings > Active access point, activate

the access point you want to use, and select Edit active access point. Select Alias

for access point, and enter a nick name for the currently selected access point.

Select Packet data access point, and enter the access point name (APN) to

establish a connection to an EGPRS network.

You can also set the dial-up service settings (access point name) on your PC using

the Nokia Modem Options software. See Nokia PC Suite p. 121. If you have set the

settings both on the PC and on your phone, the PC settings are used.

■ Enhancements

This menu is shown only if the phone is or has been connected to a compatible

mobile enhancement.

Select Menu > Settings > Enhancements. You can select an enhancement menu if

the corresponding enhancement is, or has been, connected to the phone.

Depending on the enhancement, select from the following options:

Default profile — to select the profile that you want to be automatically activated

when you connect to the selected enhancement

Automatic answer — to set the phone to answer an incoming call automatically

after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer

is off.

Lights — to set the lights permanently On. Select Automatic to set the lights on for

15 seconds after a keypress.

Text phone > Use text phone > Yes — to use the text phone settings instead of

headset or loopset settings

■ Configuration

You can configure your phone with settings that are required for certain services

to function correctly. The services are browser, multimedia messaging, remote

Internet server synchronization, presence, and e-mail application. Get the settings

from your SIM card, from a service provider as a configuration message, or enter

your personal settings manually. You can store configuration settings from up to

20 service providers in the phone and manage them within this menu.

To save the configuration settings received by a configuration message from a

service provider, see Configuration settings service p. 15.

Select Menu > Settings > Configuration and from the following options:

Default configuration settings — to view the service providers saved in the phone.

Scroll to a service provider, and select Details to view the applications that the

configuration settings of this service provider support. To set the configuration

settings of the service provider as default settings, select Options > Set as default.

To delete configuration settings, select Delete.

Activate default in all applications — to activate the default configuration settings

for supported applications

Preferred access point — to view the saved access points. Scroll to an access point,

and select Options > Details to view the name of the service provider, data bearer,

and packet data access point or GSM dial-up number.

Connect to service provider support — to download the configuration settings

from your service provider

Personal configuration settings — to add new personal accounts for various

services manually, and to activate or delete them. To add a new personal account

if you have not added any, select Add new; otherwise, select Options > Add new.

Select the service type, and select and enter each of the required parameters. The

parameters differ according to the selected service type. To delete or activate a

personal account, scroll to it, and select Options > Delete or Activate.

■ Security

When security features that restrict calls are in use (such as call barring, closed user group

and fixed dialing) calls still may be possible to the official emergency number programmed

into your device.

Select Menu > Settings > Security and from the following options:

PIN code request — to set the phone to ask for your PIN or UPIN code every time

the phone is switched on. Some SIM cards do not allow the code request to be

turned off.

Call barring service (network service) — to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Fixed dialling — to restrict your outgoing calls to selected phone numbers if this

function is supported by your SIM card

Closed user group (network service) — to specify a group of people whom you can

call and who can call you

Security level > Phone — the phone asks for the security code whenever a new SIM

card is inserted into the phone. Select Memory, and the phone asks for the

security code when SIM card memory is selected and you want to change the

memory in use.

Access codes — to change the security code, PIN code, UPIN code, PIN2 code, and

barring password

Code in use — to select whether the PIN code or UPIN code is be active

Pin2 code request — to select whether PIN2 code is required when using a specific

phone feature which is covered by the PIN2 code

■ Restore factory settings

To reset some of the menu settings to their original values, select Menu >

Settings > Restore factory sett.. Enter the security code. The data you have

entered or downloaded are not deleted, for example, the names and phone

numbers saved in Contacts.

10. Operator menu

This menu lets you access a portal to services provided by your network operator.

The name and the icon depend on the operator. For more information contact,

your network operator. If this menu is not shown, the following menu numbers

change accordingly.

The operator can update this menu with a service message. For more information,

see Service inbox p. 114.

11. Gallery

In this menu you can manage graphics, images, recordings, video

clips, themes, and tones. These files are arranged in folders.

Your phone supports an activation key system to protect acquired content. Always

check the delivery terms of any content and activation key before acquiring them,

as they may be subject to a fee.

content from being copied, modified, transferred or forwarded.

The files stored in Gallery use a memory that may have a capacity of about 3 MB.

To see the list of folders, select Menu > Gallery.

To see the available options of a folder, select a folder and Options.

To view the list of files in a folder, select a folder and Open.

To see the available options of a file, select a file and Options.

12. Media

content from being copied, modified, transferred or forwarded.

■ Camera

You can take photos or record video clips with the built-in camera. The camera

produces pictures in JPEG format and video clips in 3GP format.

When taking and using images or video clips, obey all laws and respect local customs as well

as privacy and legitimate rights of others.

The Nokia 7360 device supports an image capture resolution of 640 x 480 pixels. The image

resolution in these materials may appear different.

Take a photo

To take a photo, select Menu > Media > Camera > Capture. The phone saves the

photo in Gallery > Images. To take another photo, select Back; to send the photo

as a multimedia message, select Send. To view the options, select Options.

Record a video clip

Select Menu > Media > Camera. To select the video mode, scroll left or right, or

select Options > Video; to start the recording, select Record. To pause the

recording, select Pause; to resume the recording, select Continue. To stop the

recording, select Stop. The phone saves the recording in Gallery > Video clips. To

view the options, select Options.

■ Radio

The FM radio depends on an antenna other than the wireless device antenna. A compatible

headset or enhancement needs to be attached to the device for the FM radio to function

properly.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be extremely loud.

Select Menu > Media > Radio. To use the graphical keys

on the display, scroll left or right to the desired key, and select it.

To change the volume, press the volume keys.

Save radio channels

1. To start the channel search, select and hold

. To change the radio

frequency in 0.05 MHz steps, briefly press

2. To save the channel to a memory location, 1 to 9, press and hold the

corresponding number key. To save the channel in the memory location from

10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.

3. Enter the name of the channel, and select OK.

Listen to the radio

Select Menu > Media > Radio. To scroll to the desired channel, select

or press the headset key. To select a radio channel location, briefly press the

corresponding number keys.

Select Options and from the following options:

Switch off — to turn off the radio

Save channel — to save a new channel, and enter the channel name

Channels — to select the list of saved channels. To delete or rename a channel,

scroll to the desired channel, and select Options > Delete channel or Rename.

Mono output or Stereo output — to listen to the radio in monophonic sound or in

stereo

Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset.

Keep the headset connected to the phone. The lead of the headset functions as the

radio antenna.

Set frequency — to enter the frequency of the desired radio channel

You can normally make a call or answer an incoming call while listening to the

radio. During the call, the volume of the radio is muted.

When an application using a packet data or HSCSD connection is sending or

receiving data, it may interfere with the radio.

■ Recorder

You can record pieces of speech, sound, or an active call for up to 5 minutes. The

actual recording time depends on the available memory space.

The recorder cannot be used when a data call or packet data connection is active.

Record sound

1. Select Menu > Media > Recorder.

To use the graphical keys,

, or

, on the display, scroll left or right to

the desired key, and select it.

2. To start the recording, select . To start the recording during a call, select

Options > Record. While recording a call, all parties to the call hear a faint

beeping sound about every 5 seconds. When recording a call, hold the phone in

the normal position near to your ear.

3. To end the recording, select

. The recording is saved in Gallery > Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using a multimedia message or IR, select Options >

Send last recorded.

List of recordings

Select Menu > Media > Recorder > Options > Recordings list. The list of folders in

the Gallery is shown. Open Recordings to see the list with recordings. Select

Options to select options for files in the Gallery. See Gallery p. 81.

13. Organiser

■ Alarm clock

You can set the phone to alarm at a desired time. Select Menu > Organiser >

Alarm clock.

To set the alarm, select Alarm time, and enter the alarm time. To change the alarm

time when the alarm time is set, select On. To set the phone to alert you on

selected days of the week, select Repeat alarm.

To select the alarm tone or set a radio channel as the alarm tone, select Alarm

tone. If you select the radio as an alarm tone, connect the headset to the phone.

The phone uses the last channel you listened to as the alarm, and the alarm plays

through the loudspeaker. If you remove the headset or switch off the phone, the

default alarm tone replaces the radio.

To set a snooze time-out, select Snooze time-out.

Stop the alarm

The phone sounds an alert tone, and flashes Alarm! and the current time on the

display, even if the phone was switched off. To stop the alarm, select Stop. If you

let the phone continue to sound the alarm for a minute or select Snooze, the

alarm stops for the selected snooze time-out and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you select Stop, the device asks whether you want to

activate the device for calls. Select No to switch off the device or Yes to make and receive

calls. Do not select Yes when wireless phone use may cause interference or danger.

■ Calendar

Select Menu >Organiser > Calendar.

The current day is indicated by a frame. If there are any notes set for the day, the

day is in bold type. To view the day notes, select View. To view a week, select

Options> Week view. To delete all notes in the calendar, select the month or week

view, and select Options > Delete all notes.

Other options for the day view may be Make a note, Delete, Edit, Move, or Repeat a

note; Copy a note to another day; Send note as text message or multimedia

message, with IR, or to the calendar of another compatible phone. In Settings you

can set the date and time settings. In Auto-delete notes you can set the phone to

delete old notes automatically after a specified time.

Make a calendar note

Select Menu > Organiser > Calendar. Scroll to the date you want, and select

Options > Make a note and one of the following note types:

Meeting,

Call,

Birthday,

Memo, or

Reminder.

Note alarm

The phone displays the note, and if set, sounds a tone. With a call note

on the

display, to call the displayed number, press the call key. To stop the alarm and to

view the note, select View. To stop the alarm for about 10 minutes, select Snooze.

To stop the alarm without viewing the note, select Exit.

■ To-do list

To save notes for tasks that you must do, select Menu > Organiser > To-do list.

To create a note if no note is added, select Add note; otherwise, select Options >

Add. Write the note, and select Save. Select the priority, the deadline, and the

alarm type for the note.

To view a note, scroll to it, and select View.

You can also select an option to delete the selected note and delete all the notes

that you have marked as done. You can sort the notes by priority or deadline; send

a note to another phone using a text message, multimedia message, or infrared;

save a note as a calendar note; or access the calendar. While viewing a note, you

can also select an option to edit the deadline or priority for the note or mark the

note as done.

■ Notes

To use this application for writing and sending notes, select Menu > Organiser >

Notes. To create a note if no note is added, select Add note; otherwise, select

Options > Make a note. Write a note, and select Save.

Other options for notes include deleting, and editing a note. While editing a note,

you can also exit the text editor without saving the changes. You can send the

note to compatible devices using a text message, a multimedia message, or IR. If

the note is too long to send as a text message, the phone asks you to delete the

appropriate number of characters from your note.

■ Synchronization

Synchronization allows you to save your calendar and Contacts data on a remote

Internet server (network service) or on a compatible PC. If you have saved data on

the remote Internet server, to synchronize your phone, start the synchronization

from your phone. To synchronize the data in the phone contacts, calendar, and

notes to correspond with the data of your compatible PC, start the

synchronization from the PC. The contact data in your SIM card is not

synchronized.

Answering an incoming call during synchronization ends the synchronization, and

you must restart it.

Server synchronization

Before synchronizing from your phone, you must do the following:

• Subscribe to a synchronization service. For details, contact your service

provider.

• Retrieve the synchronization settings from your service provider. See

Synchronization settings p. 90.

To start the synchronization from your phone, do the following:

1. Select the configuration settings you need for the synchronization. See

Synchronization settings p. 90.

2. Select Menu > Organiser > Sync > Server sync > Data to be synchronised.

Mark the data to be synchronized.

3. Select Menu > Organiser > Sync > Server sync > Synchronise. The marked

data of the active set is synchronized after confirmation.

Synchronizing for the first time or after an interrupted synchronization may take

up to 30 minutes to complete, if the contacts or calendar are full.

Synchronization settings

You may receive the configuration settings required for synchronization as a

configuration message from the service provider. To manage the configuration

settings, see Configuration p. 77.

1. Select Menu > Organiser > Sync > Server sync > Sync settings and from the

following options:

Configuration — Only the configurations that support the synchronization are

shown. Select a service provider, Default, or Personal config. for

synchronization.

Account — Select a synchronization service account contained in the active

configuration settings.

2. Select PC sync settings to enter the settings for server alerted synchronization.

Set the User name and Password.

The user name and password must be the same in the phone and in the PC.

Synchronize from a compatible PC

To synchronize Contacts, Calendar, and Notes from a compatible PC, use an IR or

data cable connection. You also need Nokia PC Suite software of your phone

installed on the PC. Start the synchronization from the PC using Nokia PC Suite.

■ Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root, and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

Select Menu > Organiser > Calculator. When 0 is displayed on the

screen, enter the first number in the calculation. Press # for a decimal point.

Select Options >Add, Subtract, Multiply, Divide, Square, Square root, or Change

sign. Enter the second number, if needed. For a total, select Equals. Repeat this

sequence as many times as it is necessary. To start a new calculation, select and

hold Clear.

To perform a currency conversion, select Menu > Organiser > Calculator. To save

the exchange rate, select Options > Exchange rate. Select either of the displayed

options. Enter the exchange rate, press the # key for a decimal point, and select

OK. The exchange rate remains in the memory until you replace it with another

one. To perform the currency conversion, enter the amount to be converted, and

select Options > In domestic or In foreign.

Note: When you change base currency, you must enter the new rates because all

previously set exchange rates are set to zero.

■ Stopwatch

To measure time, take intermediate times, or take lap times, use the stopwatch.

During timing, the other functions of the phone can be used. To set the stopwatch

timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Select Menu > Organiser > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation, select

Start. Select Split every time that you want to take an intermediate time. To stop

the time observation, select Stop. To save the measured time, select Save. To start

the time observation again, select Options > Start. The new time is added to the

previous time. To reset the time without saving it, select Reset. To set the

stopwatch timing in the background, press the end key.

Lap timing — to take lap times. To set the stopwatch timing in the background,

press the end key.

Continue — to view the timing that you have set in the background

Show last — to view the most recently measured time if the stopwatch is not reset

View times or Delete times — to view or delete the saved times

■ Countdown timer

Select Menu > Organiser > Timer. Enter the alarm time in hours, minutes, and

seconds, and select OK. If you wish, write your own note text that is displayed

when the time expires. To start the countdown timer, select Start. To change the

countdown time, select Change time. To stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone

sounds a tone and flashes the note text if it is set or Countdown time up. To stop

the alarm, press any key. If no key is pressed, the alarm automatically stops within

60 seconds. To stop the alarm and to delete the note text, select Exit. To restart

the countdown timer, select Restart.

14. Applications

■ Games

Your phone software includes some games.

Launch a game

Select Menu > Applications > Games. Scroll to the desired game, and select Open.

For options related to a game, see Other application options p. 95.

Game downloads

Select Menu > Applications > Options > Downloads > Game downloads. The list

of available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Web menu. See Bookmarks p. 112.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

Game settings

To set sounds, lights, and shakes for games and applications, select Menu >

Applications > Options > App. settings.

■ Collection

Your phone software includes some Java applications specially designed for this

Nokia phone.

Launch an application

Select Menu > Applications > Collection. Scroll to an application, and select

Open.

Other application options

Delete — to delete the application or application set from the phone

Details — to view additional information about the application

Update version — to check if a new version of the application is available for

download from Web (network service)

App. access — to restrict the application from accessing the network. Different

categories are shown. Select in each category, if available, one of the following

permissions: Ask every time to set the phone to always ask for network access, Ask

first time only to set the phone to ask for network access only on the first attempt,

Always allowed to allow the network access, or Not allowed to not allow the

network access.

Web page — to provide further information or additional data for the application

from an Internet page. This feature must be supported by the network. It is only

shown if an Internet address has been provided with the application.

Download an application

Your phone supports J2ME^TMJava applications. Ensure that the application is

compatible with your phone before downloading it.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

You can download new Java applications in different ways.

Select Menu > Applications > Options > Downloads > App. downloads. The list of

available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Web menu. Select the appropriate bookmark to connect to the

desired page. For the availability of different services, pricing, and tariffs, contact

your service provider.

Select Menu > Web > Downloads. Download an appropriate application or game.

See Download files p. 113.

Use the game download function. See Game downloads p. 94.

Use the Nokia Application Installer in PC Suite to download the applications to

your phone.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

15. Push to talk

Push to talk (PTT) over cellular is a two-way radio service available

over a GSM/GPRS cellular network (network service). PTT provides direct voice

communication. To connect, press and hold the volume up (PTT) key.

You can use PTT to have a conversation with one person or with a group of people

having compatible devices. When your call is connected, the person or group you

are calling does not have to answer the phone. The participants should confirm

the reception of any communications where appropriate, as there is no other

confirmation whether the recipients have heard the call.

To check availability and costs, and to subscribe to the service, contact your

service provider. Roaming services may be more limited than for normal calls.

Before you can use the PTT service, you must define the required PTT service

settings. See PTT settings p. 106.

While you are connected to the PTT service, you can use the other functions of the

phone. The PTT over cellular service is not connected to traditional voice

communication, and therefore many of the services available for traditional voice

calls (for example, voice mailbox) are not available for PTT over cellular

communications.

■ Push to talk menu

Select Menu > Push to talk.

To connect to or disconnect from the PTT service, select Switch PTT on or Switch

PTT off.

To view the received callback requests, select Callback inbox.

To view the list of PTT groups, select Group list.

To view the list of contacts to which you have added the PTT address received from

the service provider, select Contacts list.

To add a new PTT group to the phone, select Add group.

To set the PTT settings for use, select PTT settings.

To set the required settings for the PTT connection, select Config. settings.

To open the browser and to connect to the PTT network portal provided by the

service provider, select Web.

■ Connect to and disconnect PTT

To connect to the PTT service, select Menu > Push to talk > Switch PTT on.

indicates the PTT connection.

indicates that the service is temporarily

unavailable. The phone automatically tries to reconnect to the service until you

disconnect from the PTT service. If you have added groups to the phone, you are

automatically joined to the active (Default or Listened) groups, and the name of

the default group is displayed in the standby mode.

To disconnect from the PTT service, select Switch PTT off.

■ Make and receive a PTT call

Select Menu > Settings > Tones > Push to talk settings to set the phone to use the

loudspeaker or headset for PTT communication.

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

When connected to the PTT service, you can make or receive dial-out calls, group

calls, or one-to-one calls. One-to-one calls are calls you make to only one person.

Make a dial-out PTT call

For a dial-out PTT call you can select multiple PTT contacts from the contact list.

The recipients get an incoming call and need to accept the call in order to

participate. A dial-out call creates a temporary group, and the participants join

this group only for the duration of the call. After the call, the temporary dial-out

group is deleted.

Select Menu > Push to talk > Contacts list, and mark the desired contacts for the

dial-out call.

The icon behind the contact in the list denotes current login status:

indicate that the person is available, unavailable, or unknown;

, or

indicates that

the login status is not available. The login status is only available for subscribed

contacts. To change the subscribed contacts, select Options and from the

available contact list options Subscribe contact or Unsubscr. contact; or if one or

more contacts are already marked, Subscribe marked or Unsubscr. marked.

Press and hold the volume up (PTT) key briefly to start the dial-out call. The

marked contacts are called by the PTT service, and the joining contacts are shown

on the display. Press and hold the volume up (PTT) key again to talk to the joined

contacts. Release the volume up (PTT) key to hear the response.

Press the endkey to terminate the dial-out call.

Make a group call

To make a call to the default group, press and hold the volume up (PTT) key. A tone

sounds, indicating that the access is granted, and the phone displays your

nickname and group name.

To make a call to a non-default group, select Group list in the PTT menu, scroll to

the desired group, and press and hold the volume up (PTT) key.

Press and hold the volume up (PTT) key the entire time you are talking, and hold

the phone in front of you so that you can see the display. When you have finished,

release the volume up (PTT) key. Talking is allowed on a first-come, first-served

basis. When someone stops talking, the first person to press the volume up (PTT)

key can talk next.

Make a one-to-one call

To start a one-to-one call from the list of contacts to which you have added the

PTT address, select Contacts list. Scroll to a contact, and press and hold the volume

up (PTT) key.

You can also select the contact from Contacts.

100

To start a one-to-one call from the list of PTT groups, select Group list, and scroll

to the desired group. Select Options > Active members, scroll to the desired

contact, and press and hold the volume up (PTT) key.

To start a one-to-one call from the list of callback requests you have received,

select Callback inbox. Scroll to the desired nickname, and press and hold the

volume up (PTT) key.

Receive a PTT call

A short tone notifies you of an incoming group and one-to-one call. When

receiving a group call, the group name and the nickname of the caller are

displayed. When receiving a one-to-one call from a person whose information you

have saved in Contacts, the saved name is displayed if identified; otherwise, only

the nickname of the caller is displayed.

You can either accept or reject an incoming one-to-one call if you have set the

phone to first notify you of the one-to-one calls.

If you press and hold the volume up (PTT) key to try to respond to a group while

another member is talking, you hear a queuing tone, and Queuing is displayed as

long as you press the volume up (PTT) key. Press and hold the volume up (PTT) key,

and wait for the other person to finish; then you can talk.

■ Callback requests

If you make a one-to-one call and do not get a response, you can send a request

for the person to call you back.

101

When someone sends you a callback request, Callback request received is

displayed in the standby mode. When you receive a callback request from

someone who is not in your contacts list, you can save the name to your Contacts.

Send a callback request

You can send a callback request in the following ways:

• To send a callback request from the contacts list in the Push to talk menu,

select Contacts list. Scroll to a contact, and select Options > Send callback.

• To send a callback request from Contacts, search for the desired contact, select

Options > Contact details, scroll to the PTT address, and select Options > Send

callback.

• To send a callback request from the group list in the PTT menu, select Group

list, and scroll to the desired group. Select Options > Active members, scroll to

the desired contact, and select Options > Send callback.

• To send a callback request from the callback request list in the Push to talk

menu, select Callback inbox. Scroll to a contact, and select Options > Send

callback.

Respond to a callback request

1. To open the Callback inbox, select View. The list of nicknames of the persons

who have sent you callback requests is shown.

2. To make a one-to-one call, press and hold the volume up (PTT) key.

3. To send a call request back to the sender, select Options > Send callback.

To delete the request, select Delete.

102

Save the callback request sender

1. To open the Callback inbox, select View. The list of nicknames of the persons

who have sent you callback requests is shown.

2. To view the sender's PTT address, select Options > View PTT address.

To save a new contact or to add the PTT address to a contact, select Options >

Save as or Add to contact.

■ Add a one-to-one contact

You can save the names of persons to whom you often make one-to-one calls in

the following ways:

• To add a PTT address to a name in Contacts, search for the desired contact, and

select Options > Add detail > PTT address.

• To add a contact to the PTT contacts list, select Menu > Push to talk >

Contacts list > Options > Add contact.

• To add a contact from the group list, connect to the PTT service, select Group

list, and scroll to the desired group. Select Options > Active members. Scroll to

the member whose contact information you want to save, and select Options.

To add a new contact, select Save as. To add a PTT address to a name in

Contacts, select Add to contact.

■ Create and set up groups

When you call a group, all members joined to the group hear the call

simultaneously.

103

Each member in the group is identified by a nickname, which is shown as a caller

identification. Group members can choose a nickname for themselves in each

group.

Groups are registered with a URL address. One user registers the group URL in the

network by joining the group session the first time.

There are three types of PTT groups:

• Provisioned groups are closed groups that allow only selected participants

provisioned by the service provider to join.

• Ad hoc groups are groups that the users can create. You can create your own

group, and invite members to the group.

• Ad hoc pro groups are groups you can create from members in a provisioned

group. For example, a business can have a closed group and separate groups

created for certain business functions.

Add a group

Select Menu > Push to talk > Add group. Select from the following options:

•

Guided — to add a new group. To set the security level for the group, select

Public group or Private group. If you select Private group, the phone

automatically creates a scrambled part to the group address that the members

cannot view when they receive the invitation to the group. Only the person

who creates the private group can invite more members to the group. Enter the

name for the group. Select Default, Listened, or Inactive. The phone indicates

that the group is saved and its status. Default and Listened are active groups.

104

When you press and hold the volume up (PTT) key to make a group call, the

default group is called if you have not scrolled to any other group or contact.

To send an invitation to the group, select Yes when the phone requests it. You

can send the invitation using a text message or IR.

The members you invite to the public groups can also invite more members to

the group.

•

Manual — to join an existing group. Enter the group address. Select Default,

Listened, or Inactive. The phone indicates that the group is saved and its status.

Default and Listened are active groups. When you press and hold the volume

up (PTT) key to make a group call, the default group is called if you have not

scrolled to any other group or contact.

Receive an invitation

1. When you receive a text message invitation to a group, Group invitation

received: is displayed.

2. To view the nickname of the person who sent the invitation and the group

address if the group is not a private group, select View.

3. To add the group to your phone, select Save. To set the status for the group,

select Default, Listened, or Inactive.

To reject the invitation, select Exit > Yes, or select View > Discard > Yes.

105

■ PTT settings

There are two kinds of PTT settings: settings for connecting to the service and

settings for use.

You may receive the settings for connecting to the service from your service

provider. See Configuration settings service p. 15. You can enter the settings

manually. See Configuration p. 77.

To select the settings for connecting to the service, select Menu > Push to talk >

Config. settings and from the following options:

Configuration — to select a service provider, Default, or Personal config. for PTT

service. Only the configurations that support the PTT service are shown.

Account — to select a PTT service account contained in the active configuration

settings

You can also select from the following options: PTT user name, Default nickname,

PTT password, Domain, and Server address

To edit the PTT settings for use, select Menu > Push to talk > PTT settings and from

the following:

1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-

one calls

1 to 1 calls > Off — to make but not receive one-to-one calls. The service provider

may offer some services that override these settings. To set the phone to first

notify you of incoming one-to-one calls with a ringing tone, select Notify.

Listened groups > On — to activate the listened groups

106

PTT status in startup > Yes — to set the phone to automatically connect to the PTT

service when you switch the phone on

Send my PTT address > No — to hide your PTT address from group and one-to-one

calls

107

16. Web

You can access various mobile Internet services with your phone

browser (network service).

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

Check the availability of these services, pricing, tariffs, and instructions with your

service provider.

With the phone browser you can view the services that use wireless markup

language (WML) or extensible hypertext markup language (XHTML) on their

pages. Appearance may vary due to screen size. You may not be able to view all

details of the Internet pages.

■ Set up browsing

You may receive the configuration settings required for browsing as a

configuration message from the service provider that offers the service that you

want to use. See Configuration settings service p. 15. You can also enter all the

configuration settings manually. See Configuration p. 77.

■ Connect to a service

First, verify that the correct configuration settings of the service that you want to

use are activated.

108

1. To select the settings for connecting to the service, select Menu > Web >

Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing service

are shown. Select a service provider, Default, or Personal config. for browsing.

See Set up browsing p. 108.

Select Account and a browsing service account contained in the active

configuration settings.

Select Display terminal window > Yes to perform manual user authentication

for intranet connections.

Secondly, make a connection to the service in one of the following ways:

• Select Menu > Web > Home; or in the standby mode, press and hold 0.

• To select a bookmark of the service, select Menu > Web > Bookmarks.

• To select the last URL, select Menu > Web > Last web address.

• To enter the address of the service, select Menu > Web > Go to address, enter

the address of the service, and select OK.

■ Browse pages

After you make a connection to the service, you can start browsing its pages. The

function of the phone keys may vary in different services. Follow the text guides

on the phone display. For more information, contact your service provider.

If packet data is selected as the data bearer,

is shown on the top left of the

display during browsing. If you receive a call or a text message, or make a call

109

during a packet data connection, is shown on the top of the display to indicate

that the packet data connection is suspended (on hold). After a call the phone

tries to reconnect the packet data connection.

Browse with phone keys

Use the navigation keys to browse through the page.

To select a highlighted item, press the call key, or select Select.

To enter letters and numbers, press the keys, 0 to 9. To enter special characters,

press *.

Options while browsing

Nokia.com, Home, Add bookmark, Bookmarks, Page options, History, Downloads,

Other options, Reload, and Quit may be available. The service provider may also

offer other options.

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache.

To empty the cache, see Cache memory p. 115.

Direct calling

The browser supports functions that you can access while browsing. You can make

a phone call, save a name and a phone number from a page.

110

■ Appearance settings

While browsing, select Options > Other options > Appear. settings; or in the

standby mode, select Menu > Web > Settings > Appearance settings and from

the following options:

Text wrapping > On — to set the text to continue on the next line on the display. If

you select Off, the text is abbreviated.

Font size > Extra small, Small, or Medium — to set the font size

Show images > No — to hide pictures on the page. This can speed up the browsing

of pages that contain a lot of pictures.

Alerts > Alert for unsecure connection > Yes — to set the phone to alert when an

encrypted connection changes to unencrypted during browsing.

Alerts > Alert for unsecure items > Yes — to set the phone to alert when an

encrypted page contains an unsecure item. These alerts do not guarantee a secure

connection. For more information, see Browser security p. 115.

Character encoding > Content encoding — to select the encoding for the browser

page content

Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to

send a URL as a UTF-8 encoding. You may need this setting when you access a

Web page created in foreign language.

Screen size > Full or Small — to set the screen size

111

■ Cookies

A cookie is data that a site saves in the cache memory of your phone. Cookies are

saved until you clear the cache memory. See Cache memory p. 115.

While browsing, select Options > Other options > Security > Cookie settings; or in

the standby mode, select Menu > Web > Settings > Security settings > Cookies.

To allow or prevent the phone from receiving cookies, select Allow or Reject.

■ Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The

phone supports WML scripts.

1. While browsing, select Options > Other options > Security > Script settings; or

in the standby mode, select Menu > Web > Settings > Security settings >

Scripts over secure connection.

2. To allow the scripts, select Allow.

■ Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select

Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it; or press the call key to make a connection

to the page associated with the bookmark.

112

3. Select Options to view, edit, delete, or send the bookmark; create a new

bookmark; or save the bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

Receive a bookmark

When you have received a bookmark that is sent as a bookmark,

1 bookmark received is displayed. To save the bookmark, select Show > Save. To

view or delete the bookmark, select Options > View or Delete. To discard the

bookmark directly after you have received the bookmark, select Exit > OK.

■ Download files

To download more tones, images, games, or applications to your phone (network

service), select Menu > Web > Downloads > Tone downloads, Graphic downloads,

Game downloads, Video downloads, Theme downloads, or App. downloads.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

To save all downloaded files automatically in the appropriate folder in

Gallery or in Applications, select Menu > Web > Settings > Downloading

settings > Automatic saving > On.

113

■ Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider (network service). Service messages are notifications of, for

example, news headlines, and they may contain a text message or an address of a

service.

To access the Service inbox in the standby mode, when you have received a service

message, select Show. If you select Exit, the message is moved to the Service

inbox. To access the Service inbox later, select Menu > Web > Service inbox.

To access the Service inbox while browsing, select Options > Other options >

Service inbox. Scroll to the message you want, and to activate the browser and

download the marked content, select Retrieve. To display detailed information on

the service notification or to delete the message, select Options > Details or

Delete.

114

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service messages, select Service messages >

On or Off.

To set the phone to receive service messages only from content authors approved

by the service provider, select Message filter > On. To view the list of the approved

content authors, select Trusted channels.

To set the phone to automatically activate the browser from the standby mode

when the phone has received a service message, select Automatic connection >

On. If you select Off, the phone activates the browser only after you select

Retrieve when the phone has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache.

To empty the cache, while browsing, select Options > Other options > Clear the

cache; in the standby mode, select Menu > Web > Clear the cache.

■ Browser security

Security features may be required for some services, such as online banking or

shopping. For such connections you need security certificates and possibly a

security module, which may be available on your SIM card. For more information,

contact your service provider.

115

Security module

The security module improves security services for applications requiring a

browser connection, and allows you to use a digital signature. The security module

may contain certificates as well as private and public keys. The certificates are

saved in the security module by the service provider.

Select Menu > Web > Settings > Security settings > Security module settings and

from the following options:

Security module details — to show the security module title, status, manufacturer,

and serial number

Module PIN request — to set the phone to ask for the module PIN when using

services provided by the security module. Enter the code, and select On. To disable

the module PIN request, select Off.

Change module PIN — to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then enter the new code twice.

Change signing PIN — to change the signing PIN code for the digital signature.

Select the signing PIN you want to change. Enter the current PIN code, then enter

the new code twice.