Issue 1
V-1055
45 OHM TALKBACK CORNER SPEAKER
INTRODUCTION
The interior corner speaker, the V-1055 is a 8”
interior talkback speaker for use with Valcom
“Handsfree” talkback page control units. The
enclosure is made of steel with a durable powder
coated finish. The color of the enclosure can
easily be changed to match any decor. A cloth
covered detachable grille is included.
Mounting
Dimensions/Weight
Remove cloth covered grille from baffle. Place
speaker in the desired mounting location. Mark
“keyhole” slot for mounting (see figure 1). After
making the required connections, secure baffle to
wall with a suitable mounting screw (#10 sheet
metal screw or similar). Attach cloth covered
grille to baffle.
•
10.00"H x 12.00”W x 4.50”D
(25.4cm H x 30.48cm W x 11.43cm D)
•
3.0 lbs (1.36 kg)
Environment
Temperature:
Humidity:
-20 to +55oC
0 to 95% non-precipitating
Connections
Coverage
Two conductor twisted wire is required for the 45
Ohm talkback speakers. Standard 22 or 24
gauge station wire is acceptable. Shielded wire is
not required or recommended. Connections are
as follows:
The distance you can be away from a speaker
and still have good talkback depends on the type
of speaker and the ambient noise level. In a
typical office environment, a wall speaker will
cover approximately 600 square feet when
mounted eight feet from the floor
•
•
Speaker out from page control to speaker tip
Speaker common to speaker ring
SYSTEM DESIGN
General
TYPICAL REPLY DISTANCE CHART
The 45 Ohm Talkback Speakers are designed to
be used with the Valcom "handsfree" talkback
control units. In combination with these units,
they will provide both loudspeaker and talkback
functions.
Machine
Shop
90
80
70
60
50
(Noisy)
Talkback not recommended above 80dB
Shipping
A standard Valcom talkback paging system is
made up of three basic components:
(Moderate)
1. A talkback page control unit
2. Speakers (45 Ohm)
3. A power supply
Waiting
Rooms
(Quiet)
10'
20'
30'
40'
50'
Maximum Talkback Reply Distance
Consult Valcom's VSP - Handsfree Talkback
Paging (Part # 947099) for detailed information on
selecting the control unit and power supply.
1
947675
|