User’s Manual
TM
3-in-1 Learning Zebra Scooter
© 2010 VTech
Printed in China
91-002487-000-000
INTRODUCTION
Thank you for purchasing the VTech® Jungle Gym™ ꢀ-in-1 Learning
Zebra Scooter™!
The VTech® Jungle Gym™ ꢀ-in-1 Learning Zebra Scooter™ converts
easily from push walker to ride-on to scooter. Kids can discover
their wild side as they move with the zebra and explore new territory
with the scooter’s walkie-talkie, compass and flashlight. The zebra’s
mane features five light-up buttons that teach colors, animals and
destinations. The scooter also features fun horn buttons and a volume
control switch.
LIGHT-UP BUTTONS
HORN BUTTON
SMILE
BUTTON
RECOGNITION SLOT
MODE
SELECTOR
VOLUME
CONTROL
SWITCH
BUCKET
ꢀ
INCLUDED IN THIS PACKAGE
One zebra head with
electronic parts
Two handles
One seat
One zebra body and two
longer screws
One big screw
Three play pieces and
one bucket
Two front wheels
One axle, one wheel
fastener and one wheel
cover with two shorter
One user’s manual
ꢁ
screws
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
NOTE:
Please keep this instruction manual as it contains
important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the side of the
zebra’s head. Use a screwdriver to loosen the
screw.
3. Install2new‘AA’(AM-3/LR6)batteriesfollowing
the diagram inside the battery box. (The use
of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
The use of new alkaline batteries is recommended for maximum
performance.
•
•
•
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the toy before being
charged (if removable).
•
Rechargeable batteries are only to be charged under adult
supervision (if removable).
Do not mix old and new batteries.
Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
•
•
•
•
Only batteries of the same or equivalent type as recommended are
to be used.
Batteries are to be inserted with the correct polarity.
ꢂ
•
•
•
Exhausted batteries are to be removed from the toy.
The supply terminals are not to be short-circuited.
The toy is not to be connected to more than the recommended
number of power supplies.
•
Do not dispose of batteries in fire.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
ASSEMBLY INSTRUCTIONS
With the VTech® Jungle Gym™ ꢀ-in-1 Learning Zebra Scooter™,
safety comes first. To ensure your child’s safety, please only assemble
this product by an adult.
1. To install the front wheels onto the zebra
body, first put one wheel on the end of
the axle, then thread the axle through the
zebra body. Attach the other wheel to the
end of the axle.
2. Attach the fastener to the end wheel,
aligning the pin on the fastener with the
hole in the axle. Push the pin down into
the hole. Align the wheel cover over the
fastener, then tighten the two shorter
screws with a screwdriver.
3. To attach the left and right handles to
the zebra’s head, insert them into the
corresponding holes on the sides of the
head. You will hear a loud ‘click’ sound.
This indicates that the handles are
securely fixed into the head.
ꢃ
4. Attach the zebra’s head to the body by
snapping the head onto the body. You
will hear it click into place. Please ensure
the head is attached securely to the body.
Once the head has been attached, it
cannot be removed again.
5. Turn the zebra over to tighten the two
longer screws with a screwdriver. These
are the screws that attach the neck to the
body.
6. Insert the big screw under the seat. You
will hear a loud ‘click’ sound.
7. Insert the seat into the hinges of the neck.
You will hear a loud ‘click’ sound. This
indicates the seat is securely fixed to the
neck.
Once the ꢀ-in-1 Learning Zebra Scooter™ is assembled, it cannot
be disassembled.
ꢄ
ATTENTION: The maximum weight for this product is ꢁ2 pounds.
It is not recommended for children older than ꢀꢃ
months.
1. Before riding the scooter, please make sure the handle is
securely locked in place.
2. Please wear appropriate safety gear, including a helmet and
knee pads, when riding the scooter.
ꢀ. Please ride the scooter on a smooth surface, such as a sidewalk.
Do not ride the scooter on the street, or on gravel, sand or
water.
ꢁ. Always ride the scooter during daylight. Avoid riding at night.
ꢂ. Always wear shoes when riding the scooter.
CONVERTING THE ꢀ-IN-1 LEARNING ZEBRASCOOTER
1. To change to ride-on mode, put down
the seat, making sure it locks into place.
Hang the bucket on the peg on the front
of the neck.
2. To change to walker mode, squeeze the
two locks under the seat to release the
seat. Pull up the seat and the support on
the scooter platform, propping the seat
with the support. You will hear a loud
‘click’ sound to indicate the seat and
support are locked into place.
ꢅ
3. Todisassemblethewalkermode, squeeze
the two locks under the seat, then put
down the support plate and the seat.
4. To change to scooter mode, pull the seat
up to meet the neck, and tighten the big
screw under the seat.
5. To disassemble the scooter mode, press
and hold the black button on the side of the
neck, then unscrew the big screw under
the seat.
PRODUCT FEATURES
1. MODE SELECTOR
To turn the unit ON, slide the MODE
SELECTOR to the MUSIC MODE ( ),
the FOLLOW THE LIGHTS MODE ( ),
the ANIMAL MODE ( ) or the EXPLORE
& LEARN MODE ( ) position. To turn
the unit OFF, slide the MODE SELECTOR
to the OFF ( ) position.
ꢆ
2. VOLUME CONTROL SWITCH
To adjust the volume, slide the VOLUME
CONTROLSWITCH located on the head
to LOW VOLUME ( ) or the HIGH
VOLUME ( ) position.
ꢀ. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Jungle Gym™ ꢀ-in-1 Learning
Zebra Scooter™ will automatically power-down after approximately
45 seconds without input. The unit can be turned on again by
pressing any button.
ACTIVITIES
1. Slide the mode selector to the Music
Mode, Follow the Lights Mode, Animal
Mode or Explore & Learn Mode position
to turn the unit on. You will hear a song,
playful phrase and a short tune. The
lights will flash with the sounds.
2. Place the flashlight, compass or walkie-
talkie into the slot at the top of the zebra
head to learn objects and directions.
Upbeat short tunes and fun sounds will
accompany the play. The lights will flash
with the sounds.
10
3. Press the horn button on the left handle to
hear fun horn sounds, a playful phrase, or
a song depending on the selected mode.
The lights will flash with the sounds.
4. Press the smile button on the right handle
to hear sounds and an encouraging
phrase. The lights will flash with the
sounds.
5. Press the 5 animal light-up buttons to
learn animals, animal sounds, scene
and color. The animal buttons feature
a lion, kangaroo, monkey, hummingbird
and hippo with their scene (savannah,
outback, jungle, mountain and river). The
lights will flash with the sounds.
6. In ride-on position, ride to meet animal
friends, press the animal buttons to play
games or learn something about that
animal and where it lives. You’ll also learn
colors. Place the bucket on the neck to
hold the play pieces. The lights will flash
with the sounds.
11
7. In walker position, push to play and place
the bucket on the seat. You will hear fun
sounds and melodies. The lights will flash
with the sounds.
8. In scooter position, step on the scooter to
hear music! While a melody plays, scoot
faster to make the music play faster. The
lights will flash with the sounds.
9. If there is no input to the unit after approximately 5 seconds, you
will hear a question. After another 5 seconds if there is still no
input, you will hear a fun sung song or an encouraging phrase.
After another 5 seconds if there is still no input, you will hear some
fun sounds and an encouraging phrase. After another 5 seconds if
there is still no input, you will hear the phrase “Bye-bye,” then the
unit will automatically power-down.
MELODY LIST
1. Polly Wolly Doodle
2. Here We Go ‘Round the Mulberry Bush
3. Pop! Goes the Weasel
4. Row, Row, Row Your Boat
5. Skip to My Lou
6. Alouette
12
SONG LYRICS
SONG 1
Hop on and let’s ride.
Roll and hit your stride.
Then move to the beat.
Learning is so neat!
SONG 2
Push, roll, we’re movin’ along.
Playing with friends is full of fun!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
1ꢀ
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech® at 1-800-
521-2010 in the U.S. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Active Play products is accompanied by
a responsibility that we at VTech® take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department
on at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada,
with any problems and/or suggestions that you might have. A
service representative will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
1ꢁ
• Consult the dealer or an experienced radio/TV technician for help
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CETAPPAREILNUMÉRIQUE DE LACLASSE B ESTCONFORME
À LA NORME NMB-003 DU CANADA.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
1ꢂ
WARNING:
Riding the scooter requires adult supervision. Please supervise your
child in order to avoid harm to the child and damage to the environment.
91-0024487-007-000
|