Fina™ Technical Specification
Glass Shelf
Dimensions:
Stock Numbers:
q
YB9290BN – Glass Shelf
Brushed Nickel Finish
q
YB9290CH – Glass Shelf
Chrome Finish
Materials:
Installation Instructions:
Glass Shelf posts are constructed of
zinc. Shelf is tempered glass.
1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. Mark the 2 large hole locations of each mounting bracket.
5. Attach each mounting bracket to the wall, using the wall anchors
provided
6. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble
a set screw to each base. Use the allen wrench included in hardware
kit to tighten each set screw and secure the assembly to the mounting
bracket(s).
7. Tighten all 4 screws. Do not over tighten.
8. Assemble glass to each post with glass shelf between both washers
and finished cap.
9. Place each post over the mounting plate with setscrew down. Tighten
both setscrews.
Cleaning Instructions:
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Stock Number:______________________Glass Shelf
By Creative Specialties
25300 AL MOEN DRIVE · NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 · FAX: (800) 848- 6636
INTERNATIONAL: (440) 962- 2000 · FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 · FAX: (888) 379-272 0
WWW.CSI.MOEN.COM
ã Copyright Creative Specialties International
Literature #BA1456
|