th
If your remote model has custom-program-
mable Macro buttons available, they can be
programmed to act as a 'Macro' or Favorite
Channel button in CABLE mode. This allows
you to program up to five 2-digit channels,
four 3-digit channels or three 4-digit channels
that can be accessed with one button press.
TV
A. Quick Set-Up Method
C. Auto-Search Method
E. AUX Function: Programming a 5
Component
G. Programming Channel Control
6
7
Introduction
Button Functions
Quick Set-up Code Tables
Set-up Code Tables
CBL-CABLE Converters
1
4
Operating Instructions For
Manufacturer/Brand
Set-Up Code Number
STEP1 Turn on the device you want to program-
STEP1 Turn on the Component you want to
You can program the channel controls
(Channel Up, Channel Down, Last and
Numbers) from one Component to operate
in another Component mode. Default chan-
nel control settings on the remote control
are as follows:
TV
to program your TV, turn the TV on.
BRADFORD
BROCKWOOD
BROKSONIC
BYDESIGN
CANDLE
CAPEHART
CARY AUDIO DESIGN 266
CELEBRITY
CENTURION
CETRONIC
CHANGHONG
CITIZEN
CLARION
CLASSIC
CLP CLASSIC
COLORTYME
CONCERTO
CONCIERGE
CONTEC
CORNEA
CORONADO
CRAIG
043
116
238
The PHAZR-5 UR5U-9000L & UR5U-9020L
is designed to operate the CISCO / SA,
Pioneer, Pace Micro, Samsung and
Motorola digital set tops, Plus the majority
of TV, AUD, DVD and AUX equipment on
the market as shown below.
program (TV, AUD, DVD or AUX).
You can take advantage of the AUX func-
th
Quick Number
Manufacturer/Brand
FUJITSU
SONY
SAMSUNG
LG
TOSHIBA
PANASONIC
PHILIPS
HITACHI
SHARP
STEP2 Point the remote at the TV and press
and hold TV key for 3 seconds. While
Holding the TV key, the TV LED will light
off and on again. Begin to press the
number keys, one at a time, starting
with 1, then 2, 3...0 until the TV turns off.
STEP3 Release the TV key to save the code.
The TV LED will blink twice to con-
firm the code is stored.
tion to program a 5 Component such as a
Manufacturer/Brand
Set-Up Code Number
STEP2 Press the [COMPONENT] button (TV,
AUD, DVD or AUX) to be programmed
and [OK/SEL] button simultaneously
for 3 seconds. The Component LED
light will turn on for 30 seconds indi-
cating the unit is ready to be pro-
grammed.
second TV, AUD, DVD or Audio Component.
0
1
2
3
4
5
6
7
8
9
PHAZR-5
CISCO / SA
PIONEER
PACE
SAMSUNG
MOTOROLA
DIGEO
001 003 041 042 045 046
001 103 034 051 063 076 105
001 005 002
001 030
002 111 148
031 032
116 002 003 363
058
th
STEP1 Turn on the 5 Component you want
to program (TV, AUD, DVD or Audio).
Cable Remote Control
STEP1 Press the [CBL] button to select the
STEP2 Press the [AUX] button and the
[OK/SEL] button simultaneously for
3 seconds.The [AUX] Component
LED will turn on for 30 seconds.
STEP3 Press the [COMPONENT] button
you want to setup. Point the remote
control toward the Component and
enter the 3-digit code number
assigned to your brand.
CBL : CBL T V : CBL AUD : AUD
DVD : DVD AUX : AUX
CBL mode.
001
116
043
247
CABLE : Cable Converters
TV : Televisions
153
AUD : Audio Receivers
DVD : DVD Players
STEP2 Press the [MACRO] button and
[OK/SEL] button simultaneously for 3
seconds. The [CBL] button will turn
on for 30 seconds.
GENERAL INSTRUMENT 005 103 104
UR5U-9000L & UR5U-9020L
If you wish to store the TV channel control
in TV mode, use the following steps.
STEP1 Press the [TV] button and the
[OK/SEL] button simultaneously for
3 seconds. The [TV] Component
LED will turn on for 30 seconds.
AUX : Media PC, Gaming System, etc.
HAMLIN
HITACHI
JERROLD
MAGNAVOX
MEMOREX
MOXI
NFUSION
PANASONIC
PHILIPS
PULSAR
RCA
REGAL
REGENCY
SKY
SONY
SPRUCER
TELNET
049 050 055
103 055
005 004 103 005 003 008 009 010 069
010 012
052
111 252 153
192
044 047
006 012 013 020 085
052
047
049 050
057
230 204
108
047
354
039 040 056
052
STEP3 Point the remote toward the
Component and press the [CHꢀ] or
[CHꢁ] button one step at a time or
keep it pressed. The remote will emit
a series of ON/OFF commands.
Release the [CHꢀ] or [CHꢁ] button
as soon as the Component turns Off.
Repeat these steps for your AUD, DVD,
AUX, etc.
116 002 003 363 043 258 103 143
Replacing Batteries
Before you program or operate the remote control,
you must install two new AA alkaline batteries.
2
043
043
333
116
363
073
PHILIPS
STEP3 Enter the the 2, 3 or 4-digit code for
the channel you want programmed
first (for example, 007) using the
Number Pad, then press the [STOP]
button. Then enter the code for the
next channel (for example, 050), then
press the [STOP] button. Repeat this
process for the third channel. The
[CBL] button will blink once for each
channel entered.
B. Pre-Programmed 3-Digit Code Method
STEP1 Turn on the Component you want to
AUDIO
Quick Number
program (TV, AUD, DVD or AUX).
STEP1 Remove the battery compartment cover
STEP2 Press the [VOL ꢁ] button.
*Note : If the 3-digit code number you just
entered is the correct number, the
Component will turn Off. If it did
not turn Off, continue entering
code numbers listed for that brand
until the Component turns Off.
Manufacturer/Brand
ROTEL
DENON
YAMAHA
MARANTZ
SONY
INTEGRA
HARMAN KARDON
PIONEER
ONKYO
on the back of your remote control.
STEP2 Press the [COMPONENT] button (TV,
AUD, DVD or AUX) to be pro-
grammed and [OK/SEL] button simul-
taneously for 3 seconds. The
Component LED light will turn on for
30 seconds indicating the unit is
ready to be programmed.
STEP3 Point the remote control toward the
Component and enter the 3-digit
code number assigned to your brand.
STEP4 Test functions. (Same as for 3-Digit
Code Programming Method -
Section B). If any of the functions do
not work as they should, repeat from
STEP 3 using [CHꢀ] or [CHꢁ] but-
tons to find the correct code.
043 050 051
116
STEP3 Press the [TV] button again.
The Component LED will blink
twice to confirm the programming.
0
1
2
3
4
5
6
7
8
9
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
143
043 054
164
043 143
CROSLEY
CROWN
To return to original state:
STEP3 Replace the battery compartment cover.
STEP4 Test functions. (Same as for 3-
Digit Code Programming Method -
Section B). If any of the functions
do not work as they should, you
need to find a new code.
STEP5 Once you have found the correct
3-digit code, save it by pressing the
[AUX] button one more time. The
Component LED light will blink
twice to confirm the code was
stored. Now when you press the
AUX button, all the buttons will
If you wish to restore the CABLE channel
control in TV mode, repeat the above steps
CURTIS MATHES 116 258 363 143
CXC
CYBERHOME
DAEWOO
STEP4 Press the [CHꢀ] button to store the
channels that were selected. The
[CBL] button will blink twice to con-
firm the storage of commands.
STEP5 Save the code. (Same as for 3-
Digit Code Programming Method
- Section B).
043
015
TOCOM
but press [CBL] in STEP3
.
363 016 043 044 076 103 114 125 127
TOSHIBA
VIEWSTAR
ZENITH
143
H. Programming Volume Control
012 015
052 060 093 100
LEXICON
Now, repeat the Auto-Search Method for
those Components you could not program
earlier with the Pre-Programmed Method.
DAYTRON
DELL
DIGITAL PROJECTION 570
DIMENSIA
DREAMVISION
DUKANE
DUMONT
DURABRAND
DWIN
DYNASTY
DYNEX
EIKI
ELECTROBAND
ELECTROGRAPH 466
363 143
320 164 363
*Note : If the 3-digit code number you just
entered is correct, the Component will
turn Off. If it did not turn Off, continue
entering code numbers listed for that
brand until the Component turns Off.
Volume and Mute control are factory-pro-
grammed to automatically transfer to the
respective Component mode you select, as
follows:
To access the programmed channels, press
the [MACRO] button once. This will bring up
the first channel. Press once again and it will
bring up the second channel. Press again and
it will bring up the third channel.
TV
DVD
Quick Number
333
235
Manufacturer/Brand
Set-Up Code Number
112 143
025
036
072 251 333
247 388
002
103
D. Finding a Component Button’s
Setup Code Number
If you used the Auto-Search Method to pro-
gram a Component, you may not know
what the correct code number is. Here is a
way for you to identify the code number, so
you can record it for future reference.
STEP1 Press the [COMPONENT] button
(TV, AUD, DVD or AUX) you want
to verify and the [OK/SEL] button
simultaneously for 3 seconds. The
Component LED light will turn on
for 30 seconds.
STEP2 Press the [INFO] button and count
the number of times the Component
LED light blinks. This number indi-
cates the first digit of the code, fol-
lowed by the second and third,
each separated by a one second
pause when the LED will turn off.
Manufacturer/Brand
HITACHI
SONY
011 025
116 073
096 052
257
A MARK
ABEX
ACCURIAN
ADMIRAL
ADVENT
ADVENTURA
AIKO
0
1
2
3
4
5
6
7
8
9
STEP4 After you’ve entered the correct code
number and the Component has
turned Off, press the [POWER] button
to turn the Component back On. Now
it is time to test the VOLUME and
MUTE buttons for the TV (or PLAY and
STOP buttons for DVD) to make sure
they all work. If any of the functions do
not work as they should, repeat from
STEP 3 using the next 3-digit code
number listed for that brand until you
find the best Component code.
STEP5 Once you have found the correct 3-
digit code, save it by pressing the
same [COMPONENT] button one
more time. The Component LED light
will blink twice to confirm that the
code was successfully stored.
CBL :CBL T V : TV
DVD :TV AUX : AUX
AUD : AUD
th
J. Low Battery Warning
work with that 5 Component.
PHILIPS
However, you can program the volume
controls (Volume Up, Volume Down and
Mute) from one Component to operate in
another Component.
SAMSUNG
PHILIPS MAGNAVOX
PANASONIC
LG
JVC
DENON
043
400
187
001
When the batteries are low and need to be
replaced with fresh batteries, the Component
LED lights will blink 2 times in sequence
whenever a [POWER] button is pressed to
turn on equipment.
F. Programming the System On/Off Button
This allows you to program the System
On/Off button so it can send up to five power
On/Off commands with one button press.
AKAI
116 146 248 404 405 473 475 323 387
391
017
028
If you wish to store the TV volume control in
CBL mode, use the following steps.
STEP1 Press the [CBL] button and the
[OK/SEL] button simultaneously for
3 seconds. The [CBL] Component
LED will turn on for 30 seconds.
Operations
3
ELECTROHOME
ELEKTRA
ELEMENT
143 024 076 196
ALBATRON
ALERON
AMERICA ACTION 043
AMPRO
AMSTRAD
ANAM
Programming the Remote Control
5
STEP1 Press the [CBL] button.
072
K. Memory Lock System
This remote control is designed to retain pro-
grammed memory for 10 years even after bat-
teries are removed from the remote control.
PIONEER
DEFAULT STATE:
363 494 526
028 048 043 155 005 116 363 047 050
051 076 096 143 153 154 052 514
There are three ways you can program your remote:
STEP2 Press the [SYSTEM ON/OFF] but-
ton and the [OK/SEL] button simul-
taneously for 3 seconds. The [CBL]
button will turn on for 30 seconds.
STEP3 Press the first [COMPONENT] button
you want to store in the [SYSTEM
ON/OFF] button and then the
[POWER] button. Repeat this for other
Components until you have stored all
the desired power commands into
the [SYSTEM ON/OFF] button.
Component Default: CABLE Set Top Box (STB)
Channel Default: CABLE channel and numbers
through the CABLE STB. You have the option of
controlling your CABLE channel and numbers
through the TV or AUD. Refer to section G for pro-
gramming steps.
EMERSON
073
052
Quick Set-Up Method
*
The Pre-Programmed 3-Digit Code Method
*
AUX
Quick Number
ENVISION
EPSON
ESA
FISHER
FUJITSU
FUNAI
FUTURETECH
GATEWAY
GE
116
043 054 056 080 112
116 363 112 058
572
006
573 574
477
076 454 388
052
441
039
The Auto-Search Method
*
324 590
AOC
APEX
Manufacturer/Brand
323
The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by
using one-digit codes for up to 10 major brands for each component.
STEP2 Press the [VOL ꢀ] button.
0
1
2
3
4
5
6
7
8
9
BOSE
HP
L. Record Your Component Set-up
Codes
007 057
246 198 410
028 043 052
APEX DIGITAL
AQUAVISION
ASTAR
AUDIOVOX
AVENTURA
AVION
AXION
BELCOR
BELL&HOWELL
BENQ
BOXLIGHT
STEP3 Press the [TV] button. The Component
LED will blink twice to confirm the pro-
gramming.
To return to original state:
If you wish to restore the CBL volume con-
trol in CBL mode, repeat the above steps
The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code num-
bers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest and easiest of the two
methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through
all the codes in the remote control, one at a time.
Volume Default: Volume and Mute control are
automatically transferred to the respective
Component mode you select, as follows: CBL:
Cable Set Top Box / TV: TV / AUD:AUD. Volume
and Mute control for DVD are automatically
transferred to the TV. However, you have the
option of controlling CABLE Volume and Mute
through the TV, DVD or AUD. Refer to section H
for programming steps.
APPLE / iPod
APPLE / iPod
MICROSOFT / XBOX
SONY / PS2
LUTRON
TV
Set-up Code Number:
043
Now, program the rest of your Components
by repeating STEPS 1-5.
242 268
AUD Set-up Code Number:
DVD Set-up Code Number:
AUX Set-up Code Number:
073 116 008 009 034 056 074 155 333
*Note : If the Pre-Programmed Method did
not work, or if the Code Tables do
not list your Component brand, use
the Auto-Search Method as explained
in Section C.
363
391
*Note : 10 blinks represents the number zero.
IMPORTANT SETUP NOTE!
STEP4 Press the [CHꢀ] button to save the
power commands you stored. The
[CBL] button will blink twice to con-
firm the commands have been saved.
GEM
116
333 072
423
Universal Remote Control, Inc.
X-10
X-10
Example : One blink, (pause), eight blinks,
(pause) and three blinks, indi-
cates code number 183.
This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 sec-
onds.If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode and you will
need to start over.
GIBRALTER
GO VIDEO
GOLDSTAR
116 073
but press [CBL] in STEP3
.
For additional information about your remote
026
OCE-0081A Rev 01 (12/09/09)
I. Programming a ‘Macro’ button.
MICROSOFT / XBOX
266
113 116 102 363 106 112 127 143
|