USER’S GUIDE
F-SM-MM-06
Stand-Alone Media Converter
• OC-12 ATM / SONET
• Singlemode to Multimode
Transition Networks F-SM-MM-06
Ethernet Media Converter extends ATM or
SONET over singlemode fiber-optic cable
up to 40 km.
Part Number
Port One - Fiber-Optic Port Two - Fiber-Optic
SC, 1300 nm multimode SC, 1310 nm singlemode
2 km (1.2 miles)* 15 km (9.3 miles)*
F-SM-MM-06(XL) SC, 1300 nm multimode SC ,1310 nm singlemode
2 km (1.2 miles)* 40 km (24.9 miles)*
F-SM-MM-06
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network. See the Cable Specifications on page 4
for more information on the cable length.
Optional Accessories (sold separately)
Part Number Description
SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone
Output: 12.6VDC, 1.0 A
SPS-1872-CC Optional External Power Supply; 18-72VDC Piggy-back;
Output: 12.6VDC, 1.0 A
E-MCR-03
WMBL
12-Slot Media Converter Rack (includes universal internal power
supply) 17 x 15 x 5 in. (432 x 381 x 127 mm)
Optional Wall Mount Brackets
Length: 4.0 in. (102 mm), Fits converter length: 4.7 in. (119 mm)
WMBV
Optional Vertical Mount Bracket; Length: 5.0 in. (127 mm)
WMBD
WMBD-F
Optional DIN Rail Mount Bracket; Length: 5.0 in. (127 mm)
Optional DIN Rail Mount Bracket (flat); Length: 3.3in. (84 mm)
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .3
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Fault Isolation and Correction . . .6
Contact Us . . . . . . . . . . . . . . . . . .7
Compliance Information . . . . . . . .8
F-SM-MM-06
CABLE SPECIFICATIONS
TECHNICAL SPECIFICATIONS
The physical characteristics must meet or exceed ANSI TI.646-1995, ITU G.957
specifications.
For use with Transition Networks Model F-SM-MM-06 or equivalent
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
-10
Bit Error Rate:
<10
Multimode
1300 nm
Standards:
ANSI TI.646-1995, ITU G.957
622 Mb/s
Recommended:
Optional:
62.5/125 µm
100/140, 85/125, 50/125 µm
Data Rate:
Case Dimensions:
Weight:
4.7" x 3.0" x 1.0" (119 mm x 76 mm x 25 mm)
10 oz. (283 g) (approximate)
3.1 W
Fiber Optic Transmitter Power:
Fiber Optic Receiver Sensitivity:
Link Budget:
min: -19.0 dBm max: -14.0 dBm
min: -26.0 dBm max: -14.0 dBm
7.0 dB
Power Consumption:
Minimum cable distance*
Typical maximum cable distance* 2 km (1.2 miles)
2 meters (6.6 ft)
Power Supply
DC Output:
12VDC, 0.4 A (minimum)
minimum output regulation: 5%
Connector: 2.1mm barrel, center pin positive
Singlemode
MTBF
51,185 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
Recommended:
9 µm
124,339 hours (Bellcore7 V5.0)
F-SM-MM-06
1310 nm
Environment:
Tmra*:
0 to 50°C (32 to 122°F)
-20 to 85°C (-4 to 185°F)
10 to 90%, non condensing
0 to 10,000 feet
Fiber Optic Transmitter Power:
Fiber Optic Receiver Sensitivity:
Link Budget:
min: -15.0 dBm max: -8.0 dBm
min: -28.0 dBm max: -7.0 dBm
13.0 dB
Storage Temp:
Humidity:
Altitude:
Minimum cable distance*
Typical maximum cable distance* 15 km (9.3 miles)
2 meters (6.6 ft)
Warranty:
Lifetime
*Manufacturer’s rated ambient temperature.
F-SM-MM-06(XL)
1310 nm
min: -3.0 dBm
min: -29.0 dBm max: -7.0 dBm
26.0 dB
2 meters (6.6 ft)
CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare
Into Beam Or View Directly With Optical Instruments.
Fiber Optic Transmitter Power:
Fiber Optic Receiver Sensitivity:
Link Budget:
Minimum cable distance*
Typical maximum cable distance* 40 km (24.9 miles)
max: +2.0 dBm
CAUTION: Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
* Actual distance is dependent upon the characteristics of the network
installation.
Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)
4
5
F-SM-MM-06
FAULT ISOLATION and CORRECTION
If the Media Converter fails, isolate and correct the failure by determining the
answers to the following questions and then taking the indicated action:
CONTACT US
Technical Support
Technical support is avialable 7:00 AM - 6:00 PM CST (GMT -6:00)
1.
Is the PWR LED on the Media Converter illuminated?
NO
US and Canada:
International:
1-800-260-1312
00-1-952-941-7600
•
•
•
Is the power adapter the proper type of voltage and cycle frequency
for the AC outlet?
Is the power adapter properly installed in the Media Converter and in
the outlet?
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
YES
•
Proceed to step 2.
2.
Is the multimode Link LED (on the left) illuminated?
NO
E-Mail
Ask a question anytime by sending an e-mail to our technical support staff.
•
•
Check the fiber cables for proper connection.
Verify that the TX and RX cables on the Media Converter are
connected to the RX and TX ports, respectively, on the other device.
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
Address
Transition Networks
6475 City West Parkway
Minneapolis, MN 55344, USA
telephone:
toll free:
fax:
•
YES
•
952-941-7600
800-526-9267
952-941-2322
Proceed to step 3.
3.
Is the singlemode Link LED (on the right) illuminated?
NO
•
•
Check the fiber cables for proper connection.
Verify that the TX and RX cables on the Media Converter are
connected to the RX and TX ports, respectively, on the other device.
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
•
YES
•
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
DECLARATION OF CONFORMITY
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
Part Number(s):
Regulation:
F-SM-MM-06 Series Media Converters
F-SM-MM-06, F-SM-MM-06(XL)
EMC Directive 89/336/EEC
Purpose: To declare that the F-SM-MM-06 to which this declaration refers is in
conformity with the following standards.
EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;
EN 60950 A4:1997; IEC 801.2, 801.3, 801.4; IEC 950; 21 CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
January 1, 1997
Stephen Anderson, Vice-President of Engineering
Date
Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)
6
7
COMPLIANCE INFORMATION
UL Listed
C-UL Listed (Canada)
CISPR22/EN55022 Class A
CE Mark
FCC Regulations
This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at the user's own expense.
Canadian Regulations
This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus
set out on the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la class A prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des Communications du Canada.
European Regulations
Warning
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Achtung !
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb
dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für
entsprechende Gegenmaßnahmen werantwortlich ist.
Attention !
Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer
des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures
spécifiques appropriées.
Trademark Notice
All trademarks and registered trademarks are the property of their respective owners.
Copyright Restrictions
© 1997 - 2003 Transition Networks.
All rights reserved. No part of this work may be reproduced or used in any form or by any
means - graphic, electronic, or mechanical - without written permission from Transition
Networks.
Printed in the U.S.A.
33055.C
|