TABLE OF CONTENTS
ABOUT THIS MANUAL ................................................................... 2
SAFETY INFORMATION................................................................. 2
WARNING ........................................................................................ 2
SAFETY PRECAUTIONS ............................................................... 3
SAFETY PRECAUTIONS ............................................................... 4
NOTES ON CD-R AND CD-RW DISCS ........................................... 5
NOTES ON DISCS .......................................................................... 5
SUPPLIED ACCESSORIES ............................................................ 6
DISC TYPES COMPATIBLE WITH THIS UNIT ............................. 7
GENERAL PROPERTIES ............................................................... 8
FRONT PANEL FUNCTIONS .......................................................... 9
FRONT PANEL DISPLAY ............................................................. 10
REAR PANEL PARTS.................................................................... 11
CONNECTION OF YOUR DVD PLAYER WITH TV .................... 12
CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER 13
FITTING BATTERIES IN YOUR REMOTE CONTROL .............. 14
REMOTE CONTROL FUNCTIONS ............................................. 14
DVD PLAYBACK ........................................................................... 16
DIRECT SELECTION OF SCENES ............................................. 17
REPEAT PLAY.............................................................................. 18
CONVENIENT FUNCTIONS......................................................... 18
VIDEO CD PLAYBACK ................................................................. 20
DIRECT SELECTION OF SCENES ............................................. 21
REPEAT PLAY.............................................................................. 22
CONVENIENT FUNCTIONS......................................................... 22
AUDIO CD PLAYBACK ................................................................. 23
DIRECT SELECTION OF TRACKS ............................................. 24
REPEAT PLAY.............................................................................. 24
CONVENIENT FUNCTIONS......................................................... 24
CD MENU ...................................................................................... 25
SMARTNAVI ................................................................................. 27
USING SETUP MENU .................................................................. 29
MENU ITEMS ............................................................................... 29
TROUBLESHOOTING ................................................................. 32
SPECIFICATIONS ........................................................................ 33
DEFINITION OF TERMS.............................................................. 34
- 1 -
EN
SAFETY PRECAUTIONS
Power Source
The unit should be operated only from a 220-240V~ 50 Hz outlet. Please do not open the cover by yourself. There is high
voltage in the set, which will endanger your life. Please contact local service agent for help and advice. Repairs to be
carried out by a qualified technician only.
• The apparatus is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even
if the apparatus itself has been turned off.
• If you are not going to use the apparatus for a long time, be sure to disconnect the apparatus from the wall outlet.
Power Cord
Do not place the unit, a piece of furniture, or any object on the power cord (mains lead). Do not cut or pinch the power
cord. Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with
other cords. The power cords should be routed in such a way that they are not likely to be stepped on. A damaged power
cord can cause fire or give you an electrical shock. Check the power cord once in a while. If you find it damaged, ask
closest service agent for help. When the AC power cord needs to be changed, it should be done at a qualified service
shop only.
SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points
below for your own safety. They are of a general nature, intended to help you with all your electronic consumer products
and some points may not apply to the goods you have just purchased.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter- connections between the
pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw
the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to
be placed on the equipment.
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment. High
temperatures can melt plastic and lead to fires.
DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety.
It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended
operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your family know
how to do this. Special arrangements may need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way
-switch off, withdraw the mains plug and consult your dealer.
ABOVE ALL
— NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result
in a fatal electrical shock;
— NEVER guess or take chances with electrical equipment of any kind
— it is better to be safe than sorry!
- 3 -
EN
SAFETY PRECAUTIONS
Notes on copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without
permission.
This product is equipped with copy protection measures developed by Macrovision. Copy protection signals are recorded
on some discs. When recording these discs on a VCR, picture noise will appear during playback.
This product incorporates copyright protection technology that is protected by certain U.S. patent claims and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation . Reverse engineering or disassembly is prohibited.
The following information applies only to the model for U.K.
WIRING : This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse
always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home,
then the plug should be removed and a suitable type fitted.Please refer to the wiring instructions below:
WARNING: Amains plug removed from the mains lead of this DVD player must be destroyed.Amains plug with bared wires
is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol
and yellow.
or coloured green or green
If any any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:
- BLUE: NEUTRAL , BROWN: LIVE - As the colours of the wires in the mains lead of this DVD player may not correspond
with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must
be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must
be connected to the terminal which is marked with the letter L or coloured red.
- 4 -
EN
NOTES ON CD-R AND CD-RW DISCS
• CD-R (Recordable) and CD-RW (Rewritable) discs, recorded by the users, may only be used after finalization process.
• CD-R and CD-RW discs may not be usable, depending on the disc features, recording conditions and damage or dirt
on disc. The disc configuration and features are determined by the tool and device used for recording. Therefore, users
may face with the following undesired consequences:
• Some discs may not be read at all.
• Some discs may cause system crash after playing for a while.
• Some parts of the disc may be skipped or worked abnormally.
• Compare with the original discs, the time passed for reading a CD-R and CD-RW discs may be longer.
NOTES ON DISCS
On handling discs
• To keep the disc clean, handle the disc by its edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• If the disc is contaminated with any substance like glue remove before using it.
• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight
as the temperature can rise quickly and damage the disc.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
• Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl
LPs.
Discs that should not be used
Only the discs including the marks shown on page 7 can be played.
Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played. Do not
attempt to play such discs, as they may damage the player.
¥
NOTE:
• Do not use record spray or antistatic. Also do not use volatile chemicals such as benzene or thinner.
- 5 -
EN
SUPPLIED ACCESSORIES
In the packaging material you will find the following:
D
E
F
(a) Remote control
(b) Two R03 (AAA) batteries for remote control.
(c) Owner’s Manual
- 6 -
EN
DISC TYPES COMPATIBLE WITH THIS UNIT
This player can play the following discs.
'LVFꢄ7\SHV
ꢆ/RJRVꢉ
5HFRUGLQJ 'LVFꢄ6L]H
7\SHV
0D[ꢇ
3OD\LQJ
7LPH
&KDUDFWHULVWLFV
'9'
‡ꢄ
‡ꢄ
ꢂꢃꢄFP
$XGLR
ꢁ
9LGHR
ꢅꢄFP
9,'(2ꢀ&'
$8',2ꢀ&'
03ꢈꢀ&'
ꢂꢃꢄFP
ꢊꢋꢄPLQꢇ
ꢃꢌꢄPLQꢇ
$XGLR
ꢁ
9LGHR
‡ꢄ
‡ꢄ
ꢅꢄFP
ꢂꢃꢄFP
$XGLR
ꢊꢋꢄPLQꢇ
ꢃꢌꢄPLQꢇ
ꢅꢄFP
ꢂꢃꢄFP
$XGLR
‡ꢄ
ꢆ[[[[ꢇPSꢈꢉ
ꢅꢄFP
3,&785(ꢀ&'
ꢂꢃꢄFP
9LGHR
‡ꢄ
‡ꢄ
ꢆVWLOOꢄSLFWXUHꢉ
-3(*
ꢅꢄFP
'LY;
ꢂꢃꢄFP
$XGLR
ꢁ
9LGHR
ꢅꢄFP
- 7 -
EN
GENERAL PROPERTIES
1) DVD/VCD/CD/CD-R/CD-RW/MP3/JPEG/MPEG/DivX playback
2) NTSC/PAL playback (according to disc content)
3) User-friendly multilanguage OSD menu control
4) Vacuum Fluorescent Display (VFD)
5) Dolby Digital, DTS, LPCM audio via coaxial connection
6) Multiple Aspect Ratio support (16:9 Widescreen, 4:3 Letterbox, 4:3 PAN & SCAN)
7) Multi-Audio (up to 8) support
8) Multi-Subtitle (up to 32) support
9) Multi-Angle (up to 9) support
10) 8 parental levels
11) Fast forward and rewind at different speeds.
12) Smooth and seamless playback at 2x speed.
13) Slow motion playback in different speeds.
14) Frame by frame forward playback
15) Time Search
16) Repeat
17) A - B repeat
18) Different play modes for Audio CD, MP3, JPEG and MPEG (Normal/Shuffle/Intro)
19) Program function for Audio CD, MP3 and JPEG
20) Scart Socket
21) Analog Audio Output
- 8 -
EN
FRONT PANEL FUNCTIONS
ꢄ
ꢅ
ꢁ
ꢇ ꢆ
ꢂ
ꢃ
ꢀ
1. Disc Tray
Place a disc on the tray.
2. Front Panel Display (VFD)
Indicates the playing time, title, chapter/track, etc.
3. OPEN/CLOSE ( ) button
Opens or closes the disc tray.
4. STOP button
Stops playing disc.
5. PLAY/PAUSE button
Plays/pauses the disc. For any DVD title that has a root menu with still picture, this button functions as “button select”
(selects highlighted item) in the root menu. Otherwise this functioning of “play/pause” button on the root menu will be
prohibited by the disc, and
will appear.
´
6. SKIP buttons
Press to go back to the preceding chapter/track or go to the next chapter/track.
7. ON/SATND BY Indicator
8. ON/STANDBY button
Turns the unit on or switches the unit to standby mode.
- 9 -
EN
FRONT PANEL DISPLAY
1. Play/Pause
2. Current Disc
3. Time or Title / Chapter / Track number
4. Dolby Digital / DTS
5. Zoom
6. Title Number
7. Angle
8. Chapter / Track Number
9. Repeat
- 10 -
EN
REAR PANEL PARTS
1. DIGITAL AUDIO OUT connector
COAXIAL :
Connects to an audio component using the coaxial digital connection cord.
2. AUDIO connectors
Connects to the AV amplifier or audio input connector on the TV by using 2 cords (Left, Right).
3. VIDEO OUT connector
VIDEO :
Connects to the video input connector on the TV.
4. SCART connector
Connects to the scart-input connector on the TV.
- 11 -
EN
CONNECTION OF YOUR DVD PLAYER WITH TV
Be sure to turn off the power of each component before making the connections.
Scart socket:
RGB signal via scart cable gives you the best picture performance. If your DVD player will not be connected to a hi-fi set
or A/V amplifier to hear better sound, scart is enough for both audio & video connections.
79
Video & Audio Output RCA Jacks:
Video (yellow) & audio (Red: right, White: left) output jacks can be used to connect the DVD player to your TV set via
cables. To make this connection, your TV set must have Video & audio input connectors. This type of connection is
alternative to scart connection. Picture quality is not as good as SCART RGB connection but audio performance is the
same.
- 12 -
EN
CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER
®
Be sure to turn off the power of each component before making the connections.
Analog Audio Output Jacks:
To get better sound quality, the unit can be connected to an amplifier via analog audio left/right outputs.
Digital Audio Output Connectors:
For the best sound, the unit can be from the coaxial digital audio output to an AV amplifier with a built-in Dolby Digital or
DTS decoder. By using 6 speakers, user can enjoy the 5.1 channel surrounding sound.
¥
NOTE:
• When this unit is connected to a separate Decoder Box or Amplifier through the DIGITAL AUDIO OUT connector, you
may sometimes hear a short noise when selecting the sound system in the DVD Menu. This is not a malfunction.
- 13 -
EN
FITTING BATTERIES IN YOUR REMOTE CONTROL
First open the battery cover on the underside of the remote control. Fit both batteries 1.5Volt (R03/AAA) referring to the
imprinted symbols (+/-) in the battery case and put on the battery cover again.
While using the remote control, direct it towards the front of the DVD player. If the remote control does not work or the
chosen function could not be made, the batteries are most probably exhausted and they should be replaced as soon as
possible. Please use only leak proof batteries. If you will not be using your remote control for a long time, it is recommended
to take out the batteries from your remote control.
REMOTE CONTROL FUNCTIONS
- 14 -
EN
1. TIME button
16. AUDIO button
Changes the playing time display mode of the disc, title,
track, on the OSD and front panel display.
Changes the language of the sound while playing a DVD.
17. SUBTITLE button
2. OPEN/CLOSE ( ) button
Changes the language of the subtitle while playing a DVD.
18. ANGLE button
Opens or closes the disc tray.
3. Number buttons
Changes the angle when playing a DVD disc recorded with
multiple angles.
Press to enter track/chapter/title/time numbers directly.
4. SEARCH MODE button
19. A - B RPT button
Press to select the unit for search (title, chapter, track,
time)
Press to execute the A - B repeat play.
20. +10 button
5.TOP MENU button
For the track numbers which are greater than “9” use +10
button. Each press increases the number by 10.Then type the
second digit of track number..
Displays the title menu on the TV screen or activates the
digest menu in Picture CD(JPEG).
6. MENU button
21. PLAY MODE button
Displays the DVD root menu on screen. During VCD
playback, shows the VCD menu if it exists. Press again
to resume playback.
Press to execute disc/title/chapter repeat.
22. RETURN button
Returns to the preceding selection screen.
23. PROGRAM button
7. SLOW BUTTONS
Use these buttons for forward and reverse slow
playback
Press to enter the program menu in stop mode for audio CD,
MP3 CD and JPEG CD.
8. PLAY/PAUSE button
24. ZOOM button
Plays/pauses the disc. For any DVD title that has a root
menu with still picture, this button functions as “button
select” (selects highlighted item) in the root menu.
Otherwise this functioning of “Play/Pause” button on the
Zooms the picture.
25. SKIP/STEP : button
root menu will be prohibited by the disc, and
appear.
will
´
Press to go to the next chapter or track during playback and
next frame during pause.
9. SEARCH/REV-FWD
26. CLEAR button
Press to adjust the forward and reverse playback at
different speeds during playback (fast forward/reverse)
or during pause mode (slow motion).
Using this button you can delete the mistyped entries or you
can cancel some functions.
10. SKIP 9button
Press once midway through a chapter or track to go back
to the beginning of the current chapter or track during
playback. When pressed twice in quick succession,
playback will start from the preceding chapter or track.
11. STOP button
Stops playing disc.
12. SETUP/DISP
Displays the current playing status or set-up menu on the
TV screen.
13. Arrow buttons
Move to the items or settings.
14. ENTER button
Executes the items or settings.
15. ON/STANDBY button
Turns the unit on or switches the unit to standby mode
- 15 -
EN
DVD PLAYBACK
Preparations
Turn on your audio system if the player has been connected to an audio system and turn on your TV.
Basic Play
1. Press on the ON/STANDBY button
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides,
and place it in its proper position.
4. Press OPEN/CLOSE ( ) .
The disc tray closes and play commences if the disc does not have any menus recorded on it.
A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the
Film Company. This behaviour depends on the disc content and may change.
¥
NOTE:
• Step 5 and 6 are available only when a menu is recorded on the disc.
5. Press 3/4/6/5 or the number button(s) to select the preferred title.
6. Press ENTER.
Playback of the selected item now starts.The played item may be a motion picture, a still picture or another submenu
depending on the disc.
¥
NOTE:
• When using menus, the disc controls the behaviour of the player.
• For stopping play and returning to the menu screen (when a menu is available on the disc), press MENU or TOP MENU
button depending on the disc. Play is suspended, and the Disc menu screen is displayed.
After operation
When the unit is not in use, remove the disc and press ON/STANDBY to turn off the unit.
¥
NOTE:
• The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. When
no further selections are to be played, be sure to press the STOP (<) button to clear the menu display.
• If the disc is placed in upside down ( and it is a single sided disc), the VFD display on the player will indicate bAd dI.
For your reference:
If an action corresponding to a button is prohibited, the
symbol appears.
´
Bookmark
During playback of DVD, VCD (with PBC off, see page 20) or CD DA you can mark three positions and start playback
from those positions later.
Saving the position
1. Press PROGRAM button during playback of a DVD, VCD or CDDA.
2. Bookmark screen is displayed.
3. Select the bookmark in which you want to save the current position by using the arrow keys.
4. Press ENTER to save the current playback position.
The time is saved to the bookmark selected and is displayed in the list.
- 16 -
EN
Playback of bookmarks
Step Forward
1. Press PROGRAM button to open the bookmark screen.
2. Bookmark screen is displayed.
3. Highlight one of the bookmarks that you saved before.
4. Press ENTER.
Press PLAY/PAUSE once during playback.
Press SKIP/ STEP :.
The next frame of the movie is displayed.
¥
NOTE:
The playback will resume from that position.
Clearing bookmarks
• Reverse stepping is not available.
Slow motion Play Forward / Backward
1. Press PROGRAM button to open the bookmark screen.
2. Bookmark screen is displayed.
3. Select the bookmark you want to clear.
4. Press CLEAR
Press PLAY/PAUSE once during playback.
Press SLOW (
Slow Backward or Slow Forward
)
to increase or decrease the speed of the slow motion play.
The speed of slow motion play is displayed on the screen
each time you change it.
The content of the bookmark is cleared.
To close bookmark screen press PROGRAM again.
NOTE:
To return to normal play:
Press PLAY/PAUSE.
Bookmarks are cleared when you eject the disc or when
you turn off your player.
Direct Selection of Scenes
Stopping Play
Selecting Scenes by Chapter Number
To stop the play permanently, press STOP (<) twice.
When the STOP (<) button is pressed for the first time, a
message “PRESS PLAY KEY TO CONTINUE” will appear
on the screen to remind you if you want to continue the
play. To stop the play press the STOP (<) button again or
you can press PLAY/ PAUSE to continue playback.
Press SEARCH on the remote control once during
playback.
The chapter/title search box is displayed on the screen. You
can see the total number of chapters as -/xx.
Enter the number of the chapter using number buttons.
The selected chapter is played just after you enter all the
chapter number digits or when you press ENTER after
entering some digits.
Fast Forward / Reverse
Press FWD 8 or REV 7 on the remote control during
playback.
The speed of forward or reverse changes for every
press of the FWD 8 or REV 7button.
You can clear the field by pressing the CLEAR button if you
enter wrong number.
Normal play is resumed when the PLAY/PAUSE button is
pressed.
You can press RETURN key to cancel chapter search.
¥
NOTE:
• If you attempt to enter a number greater than the total
number of chapters on the current title, it clears the
numbers entered and waits for you to enter again.
Skip Forward / Backward
Press SKIP 9or SKIP/STEP :.
• If you wait ten seconds without pressing any key for
selecting scenes by chapter number operation is
cancelled.
A chapter is skipped forward or backward each time the
button is pressed.
When the SKIP 9 is pressed once midway through a
chapter, play returns to the start of that chapter. When it is
pressed again in quick succession, a previous chapter is
skipped each time the button is pressed.
Selecting Scenes by Title Number
Press SEARCH on the remote control once during
playback.
Pause
The chapter/title search box is displayed on the screen.
Press PLAY/PAUSE once during playback.
The picture will go to pause mode.
To return to normal play:
Press 3(Left) button on the remote control to select the
title field in the search box to change the title.
You can see the currently playing title and total number of
titles as -/xx.
Press PLAY/PAUSE again.
- 17 -
EN
Enter the number of the title using number buttons.
¥
NOTE:
The selected title is played just after you enter all the title
number digits or when you press ENTER after entering
some digits.
• Repeat play may be prohibited by some DVD titles.
Repeating sections between two specific points.
(A – B repeat)
You can clear the field by pressing the CLEAR button if you
enter wrong number.
You can press RETURN key to cancel title search.
Press A-B RPT during playback at the point where repeat
play is to commence (A).
¥
NOTE:
“ A TO B SET A ” is displayed.
• If you attempt to enter a number greater than the total
number of titles, it clears the numbers entered and waits
for you to enter again.
Press A-B RPT again at the point where repeat play is to
be concluded (B).
• If you wait ten seconds without pressing any key for
selecting scenes by title number, the operation is cancelled.
“ A TO B SET B ” is displayed and the repeat play of the
selection between points A and B starts, if not prohibited
by the DVD.
Selecting Scenes by Time
To return to normal play:
PressA-B RPT again. “ATO B CANCELLED ” is displayed
and the A-B Repeat is disabled.
You can view the DVD starting from any time point you
want.
Press SEARCH on the remote control “ twice “ during
playback.
Convenient Functions
The time search box is displayed on the screen. You can
see the total runtime of the title as --:--:--/xx:xx:xx
Displaying the time information
Enter the time using number buttons.
The title is played beginning from the desired time just after
you enter the time, if not prohibited by the DVD.
Press SETUP/DISP during playback.
During playback, when this button is pressed, some
information is displayed on TV screen to indicate the current
status of the disc. In the display screen you can find the
following information lines:
You can clear the fields by pressing the CLEAR button if
you enter wrong numbers.
You can press RETURN key to cancel time search.
Line 1: Title & Chapter Numbers
¥
NOTE:
Line 2:Audio Format, Number of Output Channels &Audio
Language
• If you attempt to enter a number greater than the total time
of the current title, it clears the numbers entered and waits
for you to enter again.
Line 3: Subtitle Language Number & Subtitle Language
• If you wait ten seconds without pressing any key for
entering time, selecting scenes by time operation is
cancelled.
Line 4: Time Counter Mode & Time Counter
Pressing SETUP/DISP button once more closes this
information screen.
You can also reach time information screen by pressing
TIME key.
Repeat Play
Time counter modes can be selected by pressing TIME key
consecutively.
Repeat Viewing
Press PLAYMODE during playback.
First hit to TIME key: TITLE ELAPSED Mode
Second hit to TIME key: TITLE REMAIN Mode
Third hit to TIME key: CHAPTER ELAPSED Mode
Fourth hit to TIME key: CHAPTER REMAIN Mode
Each time this button is pressed, a different repeat box is
displayed on the screen.
If “CHAPTER REPEAT ” is displayed, the current chapter
will be played again.
If “TITLE REPEAT ” is displayed, the current title will be
played again.
If “TITLE ELAPSED” is displayed, the elapsed time for the
title is being displayed on the VFD display.
If “REPEAT OFF” is displayed, the repeat mode is
disabled.
If “TITLE REMAIN” is displayed the remaining time for the
title is being displayed on the VFD display.
- 18 -
EN
If “CHAPTER ELAPSED” is displayed, the elapsed time for
the chapter is being displayed on the VFD display.
¥
NOTE:
• When the preferred language is not selected even after
pressing the button several times, it means that the
language is not available on the disc.
If “CHAPTER REMAIN” is displayed, the remaining time
for the chapter is being displayed on the VFD display.
• When the standby is turned on or the disc is removed, the
language heard is the one selected at the initial settings. If
this language is not recorded on the disc, only the available
language on the disc will be heard.
Displaying a scene with a larger and closer view
ZOOM function enables you to take a closer look at the
scene you are viewing. This is especially useful when you
are watching science fiction or an adventure film.
Viewing From Another Angle
Some DVD discs may contain scenes, which have been
shot simultaneously from a number of different angles. For
these discs, the same scenes can be viewed from each
of these different angles using the ANGLE button.
¥NOTE: Pressing ZOOM key consecutively will change
the zoom ratios. You can move in the picture i.e change the
zoomed location by using the 3/4/6/5arrow keys.
To return to normal play:
The number of recorded angles differs depending on the
disc used.
Press ZOOM again. “ZOOM OFF” is displayed on the screen
and the picture is now in its normal size.
(“
y/x ”) is displayed briefly on the screen during
playback. This indicates that the multi-angle scene has just
started. Also on unit’s display (VFD) ‘ANGLE’ message
appears. From that moment on, the yth angle of total x
angles is played and you can change the viewing angle
until the end of the multi-angle scene.
Displaying / Changing Subtitle Language
It is possible to change the subtitle language from the one
selected at the initial settings to a different language, if
available.
In SETUP menu, an ‘ANGLE MARK’ option exists, which,
if enabled, will display a continuous angle mark on the
screen as long as multi-angle scene is available.
(This operation works only with discs on which multiple
subtitle languages are recorded, if not prohibited by the
disc.)
Press ANGLE during playback.
The current angle is changed
Press SUBTITLE during playback.
When no subtitles are recorded
instead of the selected language.
will be displayed
PressANGLE a number of times until the preferred viewing
angle is selected.
´
Press SUBTITLE a number of times until the preferred
language is selected.
¥
NOTE:
• This function will only work on discs where different
angles have been recorded.
When this button is pressed once, the first subtitle
recorded on the disc will be displayed. The subtitles
recorded will be displayed in sequence for every press
of the SUBTITLE button cyclically.
• The viewing angles are shown on the screen. You can
select one from them for viewing.
• If you press ANGLE outside of a multi-angle scene on a
To turn off the subtitles, press subtitle a number of times
until “SUBTITLE OFF ” appears on the screen.
multi-angle title,
angle is currently available.
is displayed. It means that only one
´
¥
NOTE:
Using a DVD Menu
• When the preferred language is not selected even after
pressing the button several times, it means that the
language is not available on the disc.
Some DVD discs have unique menu structures called DVD
menus. For example, DVDs programmed with complex
content provide guide menus, and those recorded with
various languages provide menus for audio and subtitle
language. Although the DVD menus’ content and operation
differ from disc to disc, the following explains basic
operation when this feature is used.
• When the player is restarted or the disc is changed, the
subtitle selection is automatically changed back to the initial
settings.
Press TOP MENU or MENU during playback.
Changing Audio Soundtrack Language
The DVD menu available on the disc is now displayed.
It is possible to change the audio language from the one
selected at the initial settings to a different language, if
available.
¥
NOTE:
• If you press MENU, the root menu of DVD is displayed.
(This operation works only with discs on which multiple
audio soundtrack languages are recorded, if not prohibited
by the DVD.)
• If you press TOP MENU, the menu of the current title is
displayed.
Press 3/4/6/5to select the preferred item.
Press AUDIO during playback.
Press AUDIO a number of times until the preferred
language is selected.
- 19 -
EN
Press ENTER
VIDEO CD PLAYBACK
The selected item is now executed.
You can play any track you want, just by pressing the
corresponding number button.
Preparations
Press on the standby button of your audio system if the
player has been connected to an audio system.
For the track numbers which are greater than “9” use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
If you attempt to enter a number greater than the total
Basic Play
number of tracks on disc,
screen.
symbol is displayed on
´
1. Press on the standby button
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray
¥
NOTE:
• Some DVDs may not contain root and/or title menus.
Hold the disc without touching either of its surfaces, position
it with the printed title side facing up, align it with the guides,
and place it in its proper position.
4. Press OPEN/CLOSE ( ) .
The disc tray is closed.
For Video CDs without playback control:
Play commences immediately.
For Video CDs provided with playback control:
If disc contains a menu, it will appear on the screen after
a few moments.
Bookmark
Please see page 16 for bookmark operation.
Menu Play
This function works only with video CDs with playback
control (version 2.0)
The details differ depending on the disc concerned. Also
refer to the instructions accompanying the disc.
After steps 1 to 4 above the menus are displayed on the
TV screen
5. Press the number button(s) to select the preferred item.
The player now starts to play the selected item.
¥
NOTE:
• Use +10 button to enter two-digit-numbers.
• 3/4/6/5 arrow buttons are not used for selecting
items for video CDs.
What is playback control (PBC)?
If a video CD has “playback control “ written on the jacket
of disc, it means that particular scenes or information can
be selected for viewing interactively with TV screen using
the menu screen.
¥
NOTE:
• TOP MENU button is dedicated to PBC “ playback control”
during VCD playback. You can change PBC mode to ON or
OFF using this button.
- 20 -
EN
When switching from PBC off to PBC on mode, playback
will start from the beginning of the disc.
Step Forward
Press PLAY/PAUSE once during playback.
The screen suspends.
• PBC on is default. Whenever you insert a disc, it will be
on
After operation
Press SKIP/ STEP :.
When the unit is not in use, remove the disc and press
ON/STANDBY to turn off the unit.
The next frame of the movie is displayed.
¥
NOTE:
¥
NOTE:
• Reverse stepping is not available.
• The disc continues to rotate while the menu is displayed
even after the player has finished playing a particular item.
When no further selections are to be played, be sure to
press the STOP (<) button to clear the menu display.
Slow motion Play Forward / Backward
Press PLAY/PAUSE once during playback.
The screen suspends.
• If the disc is placed in upside down ( and it is a single sided
disc), the VFD display on the player will indicate BAD DISC.
Press SLOW (Slow Backward
or Slow Forward ) to
increase or decrease the speed of the slow motion play.
For your reference:
The speed of slow motion play is displayed on the screen
each time you change it.
When
symbol appears while a button is pressed on up-
´
left corner of OSD (On - Screen - Display), it means that the
player ,or the disc prohibits the corresponding operation.
To return normal play:
Press PLAY/PAUSE.
Stopping Play
To stop the play permanently, press STOP (<) twice.
When the STOP (<) button is pressed for the first time, a
message “PRESS PLAY KEYTO CONTINUE” will appear
on the screen to remind you if you want to continue the
play. To stop the play press the STOP (<) button again or
you can press PLAY/ PAUSE to continue playback.
Direct Selection of Scenes
Selecting Scenes by Time (only for version 2.0
VCDs)
You can view the video CD, starting from any time point you
want.
Fast Forward / Reverse
Press REV 7or FWD 8during playback.
Press SEARCH on the remote control once during
playback.
Normal play is resumed when the PLAY/PAUSE button is
pressed.
The time search box is displayed on the screen as TRACK
TIME _ _ : _ _ : _ _ / xx : xx : xx
The speed of advance or reverse changes for every
press of the FWD or REV button.
Enter the time using number buttons.
Player goes to entered time of the current track.
Skip Forward / Backward
Press SEARCH on the remote control two times during
playback.
Press SKIP 9or SKIP/STEP:during playback.
The time search box is displayed on the screen as DISC
TIME _ _ : _ _ : _ _ / xx : xx : xx
A track is skipped forward or backward each time the
button is pressed.
Enter the time using number buttons.
Player goes to entered time of the disc.
When the SKIP button is pressed once midway through a
track , play returns to the start of that track. When it is
pressed again in quick succession, a previous track is
skipped each time the button is pressed.
If you give up entering the time simply press RETURN, and
the operation is cancelled.
Pause
Press PLAY/PAUSE once during playback.
The screen suspends.
¥
NOTE:
•PBC will be turned off automatically when disc search is
activated.
To return to normal play:
Press PLAY/PAUSE again.
• Disc search is available only when PBC is off. (See Page
20).
- 21 -
EN
• If you attempt to enter a number greater than the total time
of the disc or current title, it clears the numbers entered
and waits for you to enter again.
Convenient Functions
• If you wait ten seconds without pressing any key for
selecting scenes, the operation is cancelled.
Displaying the time information
Press TIME during playback.
Accessing tracks using number buttons:
Each time this button is pressed, a different time information
box is displayed on the screen.
You can play any track you want, just by pressing the
corresponding number button.
If “SINGLE ELAPSED” is displayed, the VFD display on the
unit shows the elapsed time for the track which is being
played
For the track numbers which are greater than “9” use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
If “SINGLE REMAIN” is displayed, the VFD display on the
unit shows the remaining time for the track which is being
played
If you attempt to enter a number greater than the total
number of tracks on disc,
corner of screen.
symbol appears on up-left
´
If “TOTAL ELAPSED” is displayed, the VFD display on the
unit shows the elapsed time for the disc which is being
played
¥
NOTE:
• This operation is available only when PBC is off.(See
Page 20).
If “TOTAL REMAIN” is displayed, the VFD display on the
unit shows the remaining time for the disc which is being
played
Repeat Play
Displaying a scene with a larger and closer view
Press PLAY MODE during playback.
This zoom in function enables you to take a closer look at
the scene you are viewing.
Each time this button is pressed, a different repeat box is
displayed on the screen.
This is especially a useful function when you are watching
science fiction or an adventure film.
If “REPEAT TRACK” is displayed, the current track will be
played again.
Press ZOOM during playback.
If “REPEAT ALL” is displayed, the whole disc will be
played again.
You can change the zooming ratio by pressing ZOOM
button more than once.
If “REPEAT OFF” is displayed, the repeat mode is
disabled.
¥
NOTE:
¥
NOTE:
• You can move in the picture i.e change the zoomed
location by using the 3/4/6/5arrow keys.
Repeat Modes are available only when PBC is off.(See
Page 20)
Repeating sections between two specific points.(A
– B repeat)
To return to normal play:
After the biggest zoom ratio, press ZOOM again. “Zoom
Off” is displayed on the screen and the picture is now in
its normal size.
Press A-B RPT during playback at the point where repeat
play is to commence (A).
Intro - Digest menu
“A TO B SET A” is displayed on screen.
Press STOP button if it is in play mode.
Press A-B RPT again at the point where repeat play is to
be concluded (B).
Press MENU button in order to see the menu. This menu
contains:
“A TO B SET B” is displayed and the repeat-play of the
selection between points A and B starts.
1. Intro
2. Disc
3. Track
4. Exit
To return to normal play:
Press A-B RPT again. “ATO B CANCELLED” is displayed
and the A-B Repeat is disabled.
¥
NOTE:
• If you give up entering the point B after entering A simply
press RETURN, and the operation is cancelled.
- 22 -
EN
Intro
AUDIO CD PLAYBACK
Intro menu is used for introducing the content of the disc.
When you select INTRO option, it plays only first 10
seconds of each track and then passes to the next track.
Preparations
Turn on your audio system if the player has been
connected to an audio system.
After the last track it stops playing.
Disc
Basic Play
When you select DISC option, unit goes into digest mode
and 9 pictures each of which shows the first scene of the
tracks are displayed on the screen.
1. Press the ON/STANDBY button
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray
Using the arrow keys, a picture can be selected. When it
is focused, the picture starts playing within the frame.
4. Press OPEN/CLOSE ( ) .
Press ENTER button to start full-screen playback of the
selected scene.
Play is commenced.
After operation
Press SKIP/STEP :or SKIP 9button in order to display
next or previous 9 scenes in digest mode.
When the unit is not in use, remove the disc and press
ON/STANDBY to turn off the unit.
Track
When you select TRACK option, unit goes into digest mode
and 9 pictures which show different scenes from the first
track, are displayed on the screen.
¥
NOTE:
Using the arrow keys, a picture can be selected. When it
is focused, the picture starts playing within the frame.
• If the disc is placed in upside down ( and it is a single sided
disc), the VFD display on the player will indicate “bAd dI”.
Press ENTER button to start playing of the selected scene.
For your reference:
Press SKIP/STEP :or SKIP 9button in order to display
9 scenes of next or previous track.
When
appears while a button is being operated , it
´
means that the corresponding operation is prohibited by the
player .
Exit
Use this option to quit the menu.
Bookmark
Please see page 16 for bookmark operation.
Stopping Play
To stop the play permanently, press STOP (<) twice.
When the STOP (<) button is pressed for the first time, a
message “PRESS PLAYKEYTO CONTINUE” will appear on
the screen to remind you if you want to continue the play.
To stop the play press the STOP (<) button again or you
can press PLAY/ PAUSE to continue playback.
Fast Forward / Reverse
Press 8FWD or REV 7during playback.
The speed of advance or reverse changes for every
press of the FWD or REV button.
Normal play is resumed when PLAY/PAUSE button is
pressed.
¥
NOTE:
No sound will be heard during rapid advance or rapid
reverse.
- 23 -
EN
Skip Forward / Backward
Repeat Play
Press SKIP 9or SKIP/STEP:during playback.
A track is skipped forward or backward each time the
button is pressed.
Press PLAY MODE during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
When the SKIP 9 button is pressed once midway through
a track, play returns to the start of that track. When it is
pressed again in quick succession, a previous track is
skipped each time the button is pressed.
If “REPEAT TRACK” is displayed, the current track will be
played again.
If “REPEAT ALL” is displayed, the whole disc will be
played again.
Pause
If “REPEAT OFF” is displayed, the repeat mode is disabled.
Press PLAY/PAUSE once during playback.
The play suspends.
¥
NOTE:
To return to normal play:
Press PLAY/PAUSE again.
If the play list is active, the playlist is repeated instead of the
whole disc in “Repeat All” case.
Repeating sections between two specific points.
Direct Selection of Tracks
(A – B repeat)
Selecting by Time
Press A-B RPT during playback at the point where repeat
play is to commence (A).
You can play the audio CD starting from any time point you
want.
“A TO B SET A” is displayed.
Press SEARCH on the remote control during playback.
PressA-B RPT again at the point where repeat play is to be
concluded (B).
The time search box is displayed on the screen as TRACK
TIME _ _ : _ _ : _ _ / xx : xx : xx
“A TO B SET B” is displayed and the repeat-play of the
selection between points A and B starts.
Enter the time using number buttons.
To return to normal play:
Player goes to the entered time of the current track.
Press A-B RPT again. “A TO B CANCELLED” is displayed
and the A-B Repeat is disabled.
Press SEARCH on the remote control two times during
playback.
The time search box is displayed on the screen as DISC
TIME _ _ : _ _ : _ _ / xx : xx : xx
¥
NOTE:
Enter the time using number buttons.
If you give up entering the point B after entering A simply
press RETURN, and the operation is cancelled.
Player goes to the entered time of the disc.
¥
NOTE:
Convenient Functions
If you give up entering the time simply press RETURN, and
the operation is cancelled.
Displaying the time information
• If you wait ten seconds without pressing any key for
selecting tracks, the operation is cancelled.
Press TIME during playback.
Each time this button is pressed, an information box is
displayed on TV screen to indicate the status of the time
displayed on the VFD display.
Accessing tracks using number buttons
You can play any track you want, just by pressing the
corresponding number button.
If “SINGLE ELAPSED” is displayed, the VFD display on the
unit shows the elapsed time for the track that is being
played.
For the track numbers which are greater than “9” use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
If “SINGLE REMAIN” is displayed, the VFD display on the
unit shows the remaining time for the track which is being
played.
If you attempt to enter a number greater than the total
number of tracks on disc,
screen.
symbol is displayed on
´
- 24 -
EN
If “TOTAL ELAPSED” is displayed, the VFD display on the
unit shows the elapsed time for the disc which is being
played
CD MENU
If “TOTAL REMAIN” is displayed, the VFD display on the
unit shows the remaining time for the disc which is being
played.
To see the directory structure (menu) of JPEG/MP3/MPEG
CDs, you should set CD MENU option to WITH MENU in setup
page. (See Page 30.)
Program Function
If CD MENU option is set to NO MENU, the content is
automatically played without displaying menu.
Press STOP button if it’s playing.
Press PROGRAM button to select program mode.
Enter track numbers that you want to add to program list.
Basic Play
1. Press the ON/STANDBY button
For the track numbers which are greater than “9” use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
2. Press OPEN/CLOSE to open the disc tray
3. Place a CD-R / CD-RW disc onto the tray
4. Press OPEN/CLOSE to close the disc tray
Press PLAY/PAUSE button to finish the program entry.
Screen is cleared and it will start playing the program list.
DISC LOADING message appears on screen. Please wait
for a moment.
¥
NOTE:
CD MENU is displayed. Directories are on the left part and
files in the selected directory are on the right part.
• If you attempt to enter a number greater than the total
number of tracks on disc, it clears the numbers entered
and waits for you to enter again.
5. Press UP/DOWN to select file to be played.
In the stop mode you can navigate in all directories. If an
MP3 track is playing, only the current directory can be used
for navigation.
You can remove the last track of the play list by pressing
the CLEAR button.
The program is cancelled when:
6. Press ENTER,
files
,
to switch between directories &
- The disc tray is opened or closed.
On the right part:
- The power is turned off.
On the right part press RETURN to go to parent directory.
Intro Menu
Press to switch to directories.
Press STOP button if it is playing.
On the left part :
Press MENU button in order to see the menu. This menu
contains:
Press or ENTER to switch to files. Selected directory
content is displayed on the right after reading directory.
First item is highlighted initially.
1. Intro
2. Shuffle On/Off
7. Press ENTER on a file to play
3. Program
Alternatively, you can press corresponding number keys
to select a file in current directory.
4. Exit
Intro
MP3/MPEG File :
Intro menu is used for introducing the content of the disc.
Selected MP3/MPEG starts to play.
When you select INTRO option, it plays only first 10
seconds of each track and then passes to the next track.
Elapsed or Remaining Time is displayed according to Time
Mode.
After the last track it stops playing.
JPEG File :
Shuffle
Selected JPEG is displayed in full screen.
When you set SHUFFLE on, it plays the tracks once in a
random order.
Slide Show starts automatically.
Pause
Program
Press PLAY/PAUSE once during playback.
The play suspends. PAUSE message appears on screen.
To return to normal play:
When you select PROGRAM option, it activates the program
mode.
Exit
Use this option to quit menu.
Press PLAY/PAUSE again.
- 25 -
EN
¥
NOTE:
Stopping Play
• During ZOOM function, image transformation is disabled.
To stop the play permanently, press STOP (<) twice. When
the STOP (<) button is pressed for the first time, a
message “PRESS PLAY KEYTO CONTINUE” will appear on
the screen to remind you if you want to continue the play.
To stop the play press the STOP (<) button again or you
can press PLAY/ PAUSE to continue playback.
Digest Mode:
Only for JPEG:
Press PLAY button to start slide show.
Press TOP MENU button during JPEG slide show. Unit goes
into digest mode and “9” pictures are displayed on screen.
Fast Forward / Reverse
For MP3/MPEG:
Using the arrow keys, a picture can be selected.
Press ENTER button to display the selected picture.
Press REV 7 / FWD8 during playback to decrease/
increase play speed.
Press SKIP/STEP:or SKIP9buttons in order to display
next or previous “9” pictures in digest mode.
¥
NOTE:
• No sound will be heard during fast forward or reverse.
PressTOP MENU button to cancel the digest mode to start
playing.
Skip Forward / Backward
Repeat Modes
For JPEG :
Press PLAY MODE to change current repeat mode.
Repeat mode is displayed for a while in slide show mode.
In CD MENU it is displayed at the bottom.
Press SKIP 9or SKIP / STEP:during playback.
Previous or next file in the current directory will be played.
Displaying The Time Information
Image transformation
Press TIME to change displayed time mode.(Only for MP3)
Only for JPEG :
Play Modes
Press PLAY to start slide show.
Press STOP button.
There are three modes of transformation:
Press RIGHT to go to Play Modes menu.
Press ENTER to change play mode.
The options available are:
FOLDER NORMAL
- Invert
- Left
- Right
These operations are allowed only when a picture is being
displayed normally, and will be cancelled automatically
when a new picture is displayed. The arrow keys are used
to select the different transformation modes.
When this play mode is selected, the current folder will be
played once.
FOLDER REPEAT
Press 5to invert/normal
When this play mode is selected, the current folder will be
repeated continuously.
Press 3to turn left
DISC SCAN
Press 4to turn right
When this play mode is selected, the first 10 seconds of
all tracks will be played.
Zoom
Only for JPEG:
DISC NORMAL
Press PLAY to start slide show.
When this play mode is selected, the disc will be played
once.
For JPEG pictures ZOOM IN / OUTand ZOOM PAN functions
are available.
DISC REPEAT
Press ZOOM to turn on/off this function
When this play mode is selected, the disc will be repeated
continuously.
When this mode is on, any picture will be displayed at the
last ratio selected by the user.
SHUFFLE
A message will indicate the current ratio on screen.
If zoom mode is on,
When this play mode is selected, the tracks in the current
folder will be played once in a random order.
SINGLE TRACK
Press REV 7/ FWD8to control the ratio of zoom in/out.
If this option is chosen, the selected track will be played
only once.
- 26 -
EN
REPEAT TRACK
SMARTNAVI
If this option is chosen, the selected track will be repeated
continuously.
To see the directory structure (menu) of JPEG/MP3/MPEG/
MPEG4/DivX CDs, you should set SMARTNAVI option to
WITH MENU in setup page.
Press3to go to the file list of the current folder and press
PLAY/PAUSE to activate the selected playback mode.
For “SINGLE TRACK” and “REPEATTRACK” modes, press
5/ 6and ENTER to play the selected track.
If SMARTNAVI option is set to NO MENU, the content is
automatically played without displaying menu.
Program Function
Press PROGRAM to select program mode in stop mode.
Program message is displayed.
Basic Play
1. Press I / (ON / STANDBY) to turn on the power.
2. Press OPEN/CLOSE to open the disc tray
3. Place a CD-R / CD-RW disc onto the tray
Press NUMBER keys to select files in the current directory.
Alternatively, you can use UP / DOWN keys and then press
ENTER to add selected file into the program list.
Hold the disc without touching either of its surfaces, position
it with the printed title side facing up, align it with the guides,
and place it in its proper position.
Press STOP to finish program.
PROGRAM MODE will appear at the bottom of CD MENU.
Press PLAY to start program.
4. Press OPEN/CLOSE to close the disc tray
DISC LOADING message appears on screen. Please wait
for a moment.
Files in the Program list are played sequentially.
¥
NOTE:
SMARTNAVI appeared. Directories are on the left part and
files in the selected directory are on the right part.
• You can use trick mode keys, skip prev/next files, and so
on.
5. Press UP/DOWN to select file to be played.
• You can remove the last track of the playlist by pressing
the CLEAR button during program setup.
In the stop mode you can navigate in all directories. If an
MP3 track is playing, only the current directory can be used
for navigation.
• The program remains even after the Program Play ends
If you want to quit program mode:
Press STOP key if a track is being played.
Press PROGRAM key.
6. Press ENTER on a file to play
If a file is focused on the left part, the preview of the item
is displayed. If a folder is focused on the left part, the total
number of files in that directory is displayed.
Press STOP key again.
The program is cancelled when:
- The disc tray is opened or closed
- The player is turned off
MP3/MPEG/MPEG4/DivX File :
Selected MP3/MPEG/MPEG4/DivX starts to play.
Elapsed or Remaining Time is displayed according to Time
Mode.
- In each directory change
JPEG File :
Selected JPEG is displayed in full screen.
Slide Show starts automatically.
Pause
Press PLAY/PAUSE once during playback.
The play suspends. PAUSE message appears on screen.
To return to normal play:
Press PLAY/PAUSE again.
Stopping Play
Press stop (<) twice.
The play is stopped. STOP message appeared on screen
for a while.
- 27 -
EN
Fast Forward / Reverse
Repeat Modes
For MP3/MPEG/MPEG4/DivX :
Press PLAY MODE to change current repeat mode.
Repeat mode is displayed for a while in slide show mode.
In SMARTNAVI it is displayed at the bottom.
Press FWD 8 or REV 7 during playback to decrease/
increase play speed.
¥
NOTE:
• No sound will be heard during fast forward or reverse.
Displaying The Time Information
Press TIME to change displayed time mode.
Skip Forward / Backward
Press SKIP / STEP :or SKIP 9during playback.
Program Function
Next or previous file in the current directory will be played.
Press PROGRAM to select program mode in stop mode.
PROGRAM Message appears.
Image transformation
Press NUMBER keys to select files in the current directory.
Only for JPEG :
Alternatively, you can use 5 / 6keys and then press
ENTER to add selected file into the program list.
Press PLAY / PAUSE to start slide show.
PROGRAM Message appeared with the current file index
and the total files in the list.
There are three modes of transformation:
- Invert
- Mirror
- Left
Press STOP to finish program.
PROGRAM Message is appeared at the bottom of
SMARTNAVI.
- Right
Press PLAY/PAUSE to start program.
PLAY Message appears.
These operations are allowed only when a picture is being
displayed normally, and will be cancelled automatically
when a new picture is displayed. The arrow keys are used
to select the different transformation modes.
Files in the program list are played sequentially.
Press 5to invert/normal
Press 6to mirror
¥
NOTE:
• You can use trick mode keys, skip prev/next files, and so
on.
Press 3to turn left
Press 4to turn right
• You can remove the last track of the playlist by pressing
the CLEAR button.
• The program remains even after the Program Play ends
Zoom
Only for JPEG:
If you want to quit program mode:
Press STOP key if a track is being played.
Press PROGRAM key twice.
Press PLAY / PAUSE to start slide show.
It is provided both ZOOM in/out and Zoom pan functions for
JPEG pictures.
Press ZOOM to turn on/off this function
The program is cancelled when:
- The disk tray is opened or closed
- The player is turned off
When this mode is on, any picture will be displayed at the
last ratio selected by the user.
A message will indicate the current ratio on screen.
If zoom mode is on,
- In each directory change
Press REV 7/ FWD 8to control the ratio of zoom in/out.
¥
NOTE:
• During ZOOM function, image transformation is disabled.
- 28 -
EN
MENU ITEMS
USING SETUP MENU
Press SETUP/DISP key on the remote control when the
player is not in playback mode.
VIDEO SETUP
• VIDEO SETUP page will not be available if the player is in
RESUME (Pre-Stop) mode.
The setup menu-main page appears. This is the menu,
where you can change the device’s settings.
TV DISPLAY:
The aspect ratio of the picture provided by the DVD player
can be varied in line with the features available on the TV
in use.
USING MAIN PAGE
Select items using 6/5up/down arrow buttons.
When selected, the item will be highlighted.
The options available are:
NORMAL / PS (4:3 Pan & Scan):
Press ENTER to choose the highlighted item.
The submenu for the selected item appears on the screen.
Allows you to see the movie fill the entire screen of your
TV, but not the right and left edges. This type of picture can
only be viewed, if it is contained on the disc.
SETUP menu will only be available when the player is not
playing a disc.
In RESUME (Pre-Stop) mode, some pages and some items
can not be accessed. On the MAIN page, you can not
access VIDEO SETUP and PARENTAL SETUP pages in
RESUME mode.
NORMAL / LB (4:3 Letterbox):
Allows you to see movies in their original aspect ratio. You
will see the entire frame of the movie, but it will occupy a
smaller portion of the screen.
¥
NOTE:
• To close the setup menu, select EXIT SETUP and press
ENTER, or press SETUP/DISP.
USING SUB MENUS
Use 3/4left/right arrow buttons to switch between left
and right menus.
WIDE (Wide screen 16:9):
Once you enter any submenu,
Choose this setting if your DVD player is connected to a
wide-screen TV.
Use 6/5up/down arrow buttons to move the highlighted
position up and down.
Press ENTER to choose the highlighted option on the right
menu.
To close the setup menu, press SETUP/DISP.
¥ NOTE:
¥
NOTE:
• Depending on the format of the DVD disc. (eg. 2.35:1) the
picture may still have black lines above and below this
picture.
• In any submenu, to return to main page, select MAIN PAGE
and press ENTER button.
• To close the setup menu, select EXIT SETUP and press
TV TYPE:
ENTER, or press SETUP/DISP.
The video standard of the DVD player output can be
selected from ‘MULTI’, ‘NTSC’ or ‘PAL’.
If ‘MULTI’ is selected, the output standard will be either
NTSC or PAL depending on the DVD being played.
If ‘PAL’ is selected, the video output will be converted to
PAL standard irrespective of disc standard.
If NTSC is selected, the video output will be converted to
NTSC standard irrespective of disc standard.
- 29 -
EN
AUDIO SETUP
PARENTAL SETUP
It is not possible to connect speakers directly to this DVD
player; an AV amplifier must be used.
PARENTAL SETUP page will not be available if the player
is in RESUME (Pre-Stop) mode.
Playing some DVDs can be limited depending on the age of
users. The “Parental Control” function allows playback
limitation level to be set by the parent.
DOWNMIX MODE:
This mode allows the DVD player analog audio outputs to
be matched to the features available on the TV in use.
Analog audio outputs can be selected as
PARENTAL SETUP (Parental Level):
STEREO: Two channels stereo.
Parental Level can be adjusted to one of the eight levels or
“NO PARENTAL”. “NO PARENTAL” or level “8 ADULT”
adjustments let you watch all of the DVD titles ignoring the
DVD disc’s parental level. You can watch the DVD discs,
which have the same or lower parental level than the
player’s selected level only.
Use this option if you have a stereo TV or a stereo HI-FI
system.
SURROUND:
Do not use this option if your DVD player is not connected
to a multichannel TV or multichannel AV receiver. It is
particularly important not to enable speakers, which are
not present. Otherwise serious sound quality problems
will be experienced.
PASSWORD:
Password to change the parental level can be set by using
this option.
You have to set a 4- digit password when you select a
parental level for the first time.You have to enter your
password every time you want to change the parental
level. If you forget your password please contact technical
service.
DYNAMIC (Dynamic Range Compression):
Boosts frequency response. This item can be selected
between “OFF” and “FULL”.
LPCM OUTPUT:
Change Password:
This item can be selected as “LPCM 96K” or “LPCM 48K”.
DTS OUTPUT:
Using this item you can change the current password.
To change the password you will be prompted to enter
your old password. After you have entered your old
password, you can now enter the new 4-digit password.
DTS Output can be selected as “ANALOG” or “DIGITAL”.
ANALOG : Use this setting if your player is connected to
your TV or to your audio system through analog audio
output or your digitally connected audio system doesn’t
support DTS decoding feature.
You can use CLEAR key to delete the incorrect entry.
Press OPEN/CLOSE to activate parental setup setting
DIGITAL : Use this setting if your player is connected to
DTS decoding audio system via digital audio output.
PREFERENCES
ANGLE MARK, CD MENU and DEFAULTS items will not be
available if the player is in RESUME (Pre-Stop) mode
LANGUAGE SETUP
Audio, disc menu and subtitle items will not be available if
the player is in RESUME (Pre-Stop) mode.
ANGLE MARK:
OSD LANG:
This option allows you to turn on /off the angle mark on the
screen, which is displayed to indicate that a multi angle
scene has started. It also shows which angle you are
currently watching.
You can select the default OSD language of the player
menus
AUDIO:
STANDBYTIME:
You can select the default audio language if supported by
that DVD disc.
Standby activation time can be adjusted or standby can be
disabled using this option. If one of the time options is
selected, standby is activated, whenever no key is
pressed for the selected time duration in stop mode.
DISC MENU:
You can select the DVD’s disc menu language among
these languages. Disc menu appears in the selected
language, if supported by that DVD disc.
CD MENU:
This option allows you to enable or disable the CD MENU,
which is used for playing MP3, MPEG or JPEG CDs.
SUBTITLE:
You can select the default subtitle language if supported
by that DVD disc.
TRANSPARENCY:
Using this option one of the transparency levels can be
selected for on screen display.
- 30 -
EN
DEFAULTS:
If you choose RESET and press ENTER button, the
factory-presets are loaded. Parental level and parental
password do not change.
DIVX(R) Registration :
There is a registration code in this page. This code is
utilized to register this player with the DivX(R) Video On
Demand service. This will allow you to rent and purchase
video using the DivX(R) Video On Demand format.
DivX DRM User Steps:
1. The User will open the DivX Registration page by
entering the SETUP menu of the Player.
2. You will get the DivX VOD registration code via the
internet. The address for the DivX VOD website is:
3. After entering the address above on the Internet, go to
the section where registration is to be made for DivX DRM
membership.
4. Use the DivX DRM Registration code you receive from
the Player to register and set a username and a password
for yourself.
5. Once the registration process in over, you will
download the DivX DRM activation file from the Internet
and write it onto a disc.
6. After inserting this disc into the player and playing the
activation file,you will have a new player DivX DRM
Registration code activated for the player DivX DRM.
7. When you want to download and watch movies, you
to download movies with your pre-designated username
and password by paying a certain charge. Upon writing
this film on the disc and inserting it into the Player, you can
watch these the number of times that you are entitled to
watch.
- 31 -
EN
TROUBLESHOOTING
- 32 -
EN
SPECIFICATIONS
DVD/VCD/CD/CD-R/CD-RW/MP3/MPEG/JPEG/DivX player,
- 33 -
EN
DEFINITION OF TERMS
Angle
Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number different angles (the same
scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to
view the scene from different angles.
Chapter Number
These numbers are recorded on DVD discs.Atitle is subdivided into many sections, each of which are numbered, and specific
parts of video presentations can be searched quickly using these numbers.
DVD
This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital
signals. Incorporating a video compression technology (MPEG II) and high-density recording technology. DVD enables
esthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded).
DVD has a structure consisting of two 0.6 mm thin discs, which are adhered to each other. Since the thinner the disc, the higher
the density at which the information can be recorded, a DVD disc has a greater capacity than a single 1,2 mm thick disc.
Playback Control
This is recorded on a Video CD (Version 2.0). The scenes or information to be viewed (or listened to) can be selected
interactively with the TV monitor by looking at the menu shown on the TV monitor.
Subtitles
These are printed lines appearing at the bottom of the screen, which translate or transcribe the dialogue. They are recorded
on the DVD discs.
Time Number
This indicates the playtime, which has elapsed from the start of a disc or a title. It can be used to find a specific scene quickly.
(Not all discs permit the time search feature to be used. Availability is determined by the disc’s manufacturer.)
Title Number
These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title
1, title 2, etc.
Track Number
These numbers are assigned to the tracks which are recorded onAudio CDs. They enable specific tracks to be located quickly.
Video CD
This contains recordings of pictures and sound whose quality is on a par with that of video tape. This player also supports
Video CDs with playback control (Version 2.0).
Dolby Digital
Many movie theaters are equipped with 5.1 channel surround systems. This same type of technology is available to you in
your home. To enjoy full 5.1 channel surround, your DVD player must be connected to an external Dolby Digital decoder
via the digital outputs .
Dolby Pro Logic
This is Dolby Laboratories’ technology to decode Dolby Surround encoded programs actively. Dolby Surround programs have
four channels of audio (Left, Center, Right and Surround) encoded into a standard 2-channel stereo signal. The rear channel
is monaural.
PCM
PCM stands for Pulse Code Modulation and is digital audio.
MPEG
Short for Moving Picture Experts Group. This is an international standard for compression of moving images. On some DVDs
digital audio has been compressed and recorded in this format.
DivX
DivX is a digital video compression technology based on MPEG-4 and developed by DivX Networks Inc.
- 34 -
EN
¥
NOTE:
• This DVD player may not support some MP3 recordings due to differences in recording formats or disc type.
• Please read the owner’s manual about MP3 playback
• CD-R/CD-RW discs recorded by CD-DA method can be played. Some CD-R/CD-RW discs my be incompatible due to laser
pick-up and disc design.
• Some VCD discs may be incompatible .
• DVD-R discs recorded by DVD-Video method can be played . Some DVD-R discs may be incompatible due to laser pick-
up and disc design.
• Some discs may be incompatible with JPEG Viewer function due to different recording format or condition of the discs.
- 35 -
EN
|