Topcom Fidelity 1081
1
Before Initial use
2
Safety instructions
Thank you for purchasing this new desktop caller
ID telephone.
Please read carefully through the
following information concerning safety
and proper use. Make yourself familiar
with all the functions of the equipment.
Be careful to keep these advice notes
and if necessary pass them on to a third
party.
1.1
Intended Purpose
This product is intend to be connected indoor to
an analogue PSTN telephone line.
1.2
Caller ID
To use ‘Caller ID’ (display caller), this
service has to be activated on your
phone line. Normally you need a separate
subscription from your telephone
company to activate this function. If you
don’t have the Caller ID function on your
phone line, the incoming telephone
numbers will NOT be shown on the
display of your telephone.
•
Do not place the basic unit in a damp room or
at a distance of less than 1.5 m away from a
water source. Keep water away from the
telephone.
•
•
Do not use the telephone in environments
where there is a risk of explosions.
Dispose of the batteries and maintain the
telephone in an environment-friendly manner.
3
Cleaning
1.3
Connection
Clean the telephone with a slightly damp cloth or
with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
The CE symbol indicates that the unit
complies with the essential
4
Disposal of the device
(environment)
requirements of the R&TTE directive.
At the end of the product lifecycle,
This device has been designed and manufactured
to comply with the 98/482/EC rule, referent to the
Pan European connection of a terminal to the
Public Switching Telephone Network (PSTN) and
following the established guidelines by the 1999/
5/EC Directive about radio electric equipment and
the reciprocal acknowledge of their conformity.
However, due to the fact that there are some dif-
ferences in the PSTNs from one country to anoth-
er, the verifying measurements by themselves do
not set up an unconditional guarantee for an opti-
mal working in every connection point to the
PSTN of any country.If any problem comes up,
get in touch firstly with the distributor.
you should not throw this product
into the normal household garbage
but bring the product to a collection
point for the recycling of electrical
and electronic equipments. The
symbol on the product, user guide and/or box in-
dicate this.
Some of the product materials can be re-used if
you bring them to a recycling point. By re-using
some parts or raw materials from used products
you make an important contribution to the protec-
tion of the environment.
Please contact your local authorities in case you
need more information on the collection points in
your area.
In any case, use conditions for which the product
has been created should be respected as well as
avoid its use in public or private networks with
technical requirements clearly different to those
established in the EU.
Topcom Fidelity 1081
3
Topcom Fidelity 1081
5 Buttons
(See picture 1 and 2 on folded cover page)
8
Telephone settings
8.1
Setting the date and time
1.
2.
3.
4.
5.
6.
7.
8.
9.
Hook Switch
Up button ‘
When you have a subscription to the Caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone’s clock will be set automatical-
ly.
’
LCD display
Down button ‘
’
Delete button ‘
’
Numerical key pad
Hands free button ‘
’
3sec
is displayed.
Redial button ‘
Handsfree LED
’
Select ‘
’(Date Time)
10. Emergency button ‘
’
!
‘01-05 12-26’ is displayed.
11.
Flash button ’R’
Enter the day, month and time
12. Hands free speaker
13. Wall mounting hook
14. Line cord connector
(4digits) using the numerical keypad.
To confirm.
15. Power adapter connector
16. Ring volume switch
17. Wall mounting locations
18. Ringer
8.2
Flash time
R
Press
to use certain services as ‘Call Waiting’
(if this service is provided by your telephone com-
pany); or to transfer phone calls when you are us-
ing a telephone exchange (PABX).
19. Cable slots
20. Handsfree microphone
21. Handfree volume switch
The flash time can be selected (100/300/600ms).
6
Technical Data
3sec
is displayed.
Dialling options: DTMF(tone) / PULSE
Flash:100/300/600ms
3sec
Select ‘
’(Flash time)
Power adapter: Input 230VAC 50Hz / Output
6VDC - 400 mA
To confirm
Select ‘100’, ‘300’ or ‘600’ ms
7
Installation
To confirm
To activate the telephone, it must be connected to
the main power.
8.3
Dial Mode (Tone/Puls)
3sec
is displayed.
•
•
Plug one end of the supplied adapter into the
electric socket and the other end into the
connector on the bottom of the desktop
telephone (15).
Select ‘
’(Dial mode)
To confirm
Select ‘TONE’ or ‘PULSE’
Connect one end of the line cord to the
telephone line wall socket and the other end
to the bottom of the phone (14).
To confirm
8.4
Ringer volume
The ring volume can be adjusted by means of the
Ring Volume switch (16) at the bottom of the
phone.
When the display rings, the display will light up.
4
Topcom Fidelity 1081
Topcom Fidelity 1081
9
Getting started
10.2.1 Scrolling through the Call List
To enter the call list.
9.1
Making a phone call
To scroll through the call list
Enter the telephone number
10.2.2 Calling a number from the Call
List
Press the delete button briefly to
delete a wrongly entered number.
The phone number will be dialled
automatically in hands free
The volume of the handsfree
speaker can be changed by the
volume switch (21) on the side of the
telephone.
To enter the call list.
Scroll through the call list until you
have found the desired telephone
number.
Pick up the handset.The phone
number will be dialled automatically.
OR
Pick up the handset.
10.2.3 Erasing numbers from the Call
List
Enter the telephone number
a)Erasing one number
The call duration timer is shown on the 2e line of
the display [mm:ss].
To enter the call list.
Scroll through the call list until you
have found the desired telephone
number.
9.2
Deactivating the microphone
(mute)
Press the delete button briefly to
delete the selected number. ‘Del
Call’ is displayed
During conversation
You can now talk freely without the
caller hearing you.
To confirm.
You can resume your conversation.
b) Erasing the entire Call List
To enter the call list.
9.3
Last number redial
To redial the last dialled number.
Press and hold the delete button for
Pick up the handset.
3SEC
3 seconds to delete the entire call
list. ‘Del All’ is displayed
The last dialled number will be
dialled automatically
To confirm.
10.3 Voice mail
10 Caller ID
When you have received a voice mail message in
your Personal Voice Mail Box, the Voice Mail sym-
10.1 General information
bol
appears on the display. As soon as you
When you have a subscription to the Caller ID
service, the caller’s phone number will appear on
the display.
have listened to the messages in the mail box, the
symbol disappears.
* Check with your network operator if this is
available on your line.
10.2 Call list
The Fidelity 1081 can store up to 90 numbers.
The display shows the total number and new re-
ceived calls in stand-by ‘CLIP= 00-00’
Topcom Fidelity 1081
5
Topcom Fidelity 1081
11 Emergency number
You can program 1 Emergency number in the Fi-
delity 1081.
13 Warranty
13.1 Warranty period
The Topcom units have a 24-month warranty pe-
riod. The warranty period starts on the day the
new unit is purchased. The warranty on batteries
is limited to 6 months after purchase. Consumable
or defects causing a negligible effect on operation
or value of the equipment are not covered.
3sec
is displayed.
is displayed.
Press the Emergency button
!
The warranty has to be proven by presentation of
the original purchase receipt, on which the date of
purchase and the unit-model are indicated.
Enter the telephone number
Press the delete button briefly to
delete a wrongly entered number.
13.2 Warranty handling
To confirm
A faulty unit needs to be returned to a Topcom
service centre including a valid purchase note.
If the unit develops a fault during the warranty pe-
riod, Topcom or its officially appointed service
centre will repair any defects caused by material
or manufacturing faults free of charge.
The emergency number can not be deleted,
only over written.
11.1 Calling the emergency number
Press the Emergency button. The
Topcom will at its discretion fulfil its warranty obli-
gations by either repairing or exchanging the
faulty units or parts of the faulty units. In case of
replacement, colour and model can be different
from the original purchased unit.
phone number will be dialled
!
automatically in hands free
The volume of the hands free
speaker can be changed by the
volume switch (21) on the side of the
telephone.
The initial purchase date shall determine the start
of the warranty period. The warranty period is not
extended if the unit is exchanged or repaired by
Topcom or its appointed service centres.
12 Wall mounting
Pull out and rotate the wall mounting hook (13).
Put it back in position.
13.3 Warranty exclusions
Measure and mark the wall mounting locations
(17).
Damage or defects caused by incorrect treatment
or operation and damage resulting from use of
non-original parts or accessories not recommend-
ed by Topcom are not covered by the warranty.
Topcom cordless phones are designed to work
with rechargeable batteries only. The damage
caused by the use of non-rechargeable batteries
is not covered under warranty.
Drill holes, fit wall plugs and screw in screws.
The cable of the telephone can be fixed in the slot
(19) on the backside of the phone depending on
the telephone connection position.
Mount the telephone on the screws.
The warranty does not cover damage caused by
outside factors, such as lightning, water and fire,
nor any damage caused during transportation.
No warranty can be claimed if the serial number
on the units has been changed, removed or ren-
dered illegible.
Any warranty claims will be invalid if the unit has
been repaired, altered or modified by the buyer or
by unqualified, non-officially appointed Topcom
service centres.
6
Topcom Fidelity 1081
SERVICE RETURN CARD - RÜCKSENDEKARTE -
CARTE DE RETOUR SERVICE - RETOURFICHE
RETURN WITH YOUR DEFECT PRODUCT
Name/Vorname/Prénom/Naam:
Surname/Familienname/Nom/Familienaam:
Street/Straße/Rue/Straat:
Nr./N°:
Box/Postfach/Boîte/Postbus:
Location/Ort./Lieu/Plaats:
Post code/Postleitzahl/Code Postal/Postcode:
Country/Land/Pays/Land:
Tel./Tél.:
E-mail:
Model name/Modellbezeichnung/Nom du modèle/Modelnaam:
Serial Nr/Seriennummer/N° série/Serienummer:
Purchase date/Kaufdatum/Date d’achat/Aankoopdatum:
(DD/MM/YYYY) - (TT/MM/JJJJ)
Fault description/Beschreibung des Defekts/Description de la panne/Beschrijving defect:
(Original Proof of Purchase has to be attached to this return card to be valid for warranty)
Model name/Modellbezeichnung/Nom du modèle/Modelnaam:
Serial Nr/Seriennummer/N° série/Serienummer:
Purchase date/Kaufdatum/Date d’achat/Aankoopdatum:
(DD/MM/YYYY) - (TT/MM/JJJJ)
Fault description/Beschreibung des Defekts/Description de la panne/Beschrijving defect:
R00001
|