CR-113iPH
Owner’s
Handbook
Clock radio with dock for iPhone
IMPORTANT SAFETY INFORMATION
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Warning: To reduce the risk of fire or electrical shock,
do not expose this product to rain or moisture. The
product must not be exposed to dripping and splashing
and no object filled with liquids such as a vase of
flowers should be placed on the product.
IMPORTANT
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, this
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one of the following measures:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
No naked flame sources such as candles should be
placed on the product.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user’s
authority to operate this device.
Caution: Usage of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous exposure.
-
-
Connect the equipment into an outlet on
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
a
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
ELECTRICAL INFORMATION
Use this appliance only with the supplied AC Adaptor.
Using non-approved power supplies will void the
warranty.
Mains Supply: The mains operating voltage of the
AC Adaptor is marked on a rating plate on the AC
Adaptor.
Do not install or operate near any heat sources such
as radiators, stoves, or other apparatus that produce
heat.
The means of disconnecting this appliance from
the mains supply is the AC adaptor. This should be
unobstructed and readily operable at all times.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
1
INDEX
INTRODUCTION
PRELIMINARIES
INDEX
The CR-113iPH is a full-function clock radio with dual alarms
and a retractable docking bay for an iPod or iPhone.
Special features of the CR-113iPH enable it to share
information with a docked iPod touch or iPhone (requires
installation of a free Technika application on the iPhone).
UNPACKING
Carefully unpack the unit. If it is damaged, please return it to
your nearest Tesco store for replacement. Remember to take
your purchase receipt with you.
Retain the User Handbook. If you pass the unit on to a third
party make sure you pass on the handbook.
Important safety information..................................1
Introduction ............................................................2
Unpacking ...............................................................2
Controls & Connections............................................3
Fitting batteries.......................................................4
Display features .......................................................5
Backup battery ........................................................6
Getting started ........................................................7
Power control ..........................................................7
Setting the time and date........................................7
Selecting a source....................................................8
Adjusting the volume ..............................................8
Listening to FM radio...............................................8
Radio presets...........................................................8
iPod dock and adaptors ...........................................9
Docking an iPod.....................................................10
Playing an iPod......................................................10
Playing other audio sources...................................11
Using the alarms....................................................12
Advanced operation...............................................13
Sleep function .......................................................16
Care & Maintenance...............................................16
Troubleshooting ....................................................16
Specifications ........................................................16
Warranty ...............................................................16
We suggest you retain the packaging. If you dispose of it, do
so having regard to any recycling regulations in your area.
CONTENTS
The carton should contain:
•
•
•
The CR-113iPH clock radio
AC adaptor
Operating Manual
If any items are missing or damaged, contact your nearest
TESCO store for a replacement. Have your receipt ready when
you call. Retain the packaging. If you dispose of it, do so
having regard to any recycling regulations in your area.
LOCATION
Place the unit on dry stable surface away from heat and
damp and where it is unlikely to fall or be knocked over.
If you plan to dock an iPod or iPhone to the unit, ensure that
there is enough clearance for the retractable dock to open
from the left side of the unit.
2
CONTROLS & CONNECTIONS
FRONT VIEW
a
b
c
d
e
f
g
h
i
Display
Preset button
Display/Memory button
Play/Pause/Enter button
Next/Set + button
Previous/Set - button
Alarm button
Time button
Sleep button
1) Retractable iPod dock
3
CONTROLS & CONNECTIONS
TOP VIEW
BACK VIEW
a
b
c
d
e
Volume down (-) and up (+) buttons
Standby/On/Alarm reset button
Snooze/Display dimmer button
Input function selector button
Retractable iPod dock
a
b
c
d
12/24 hour selector button
Audio In jack
FM aerial wire
DC In jack
4
DISPLAY
DISPLAY DIMMER
The display brightness can be set to one of 3 levels.
•
Press the SNOOZE/DIMMER button repeatedly to set the
display brightness to one of the options of high, medium
or off.
DISPLAY LAYOUT
a
b
c
d
e
f
Time display
1@ iPod/iPhone mode indicator
1# Alarm 2 indicator
1$ Alarm 1 indicator
1% AM/PM Indicator for clock (12 hour mode)
*Features require a docked iPhone or iPod touch
with Technika application installed.
g
h
i
Month/Alarm hours display
Weather display*
AM/PM indicator for alarm
FM stereo indicator
MHz indicator for FM
Date/Alarm minutes time display
Sleep indicator
1) AUX (Audio In) mode indicator
1! FM mode indicator
Temperature display*
5
BACKUP BATTERY
A backup battery may be fitted to your clock radio. With the
backup battery fitted, your clock radio will retain your time
and alarm settings in the event of a power cut.
The backup battery compartment is located on the underside
of the unit.
3. Fit a CR2032 battery, observing polarity as shown
below.
To fit a backup battery:
1. Referring to the drawing, use a coin or flat-bladed
screwdriver to turn the battery cover anti-clockwise to
the ‘unlocked’symbol.
4. Replace the battery cover with the slot aligned to the
unlock symbol.
5. Turn the cover to align the slot with the lock symbol to
lock it in place.
Battery disposal:
Dispose of used batteries with regard to the recycling
regulations in your area. Do NOT short circuit batteries or
throw them into water, the general rubbish or in a fire.
Weak batteries can leak and damage the unit. Replace them
in good time!
2. Lift out the battery cover.
6
GETTING STARTED
TIME AND DATE DISPLAYS
FM AERIAL
SETTING THE TIME AND DATE
When first switched on, the clock and date displays on your
radio will not be set.
•
•
•
•
Press the }/SET+ or {/SET- button to set the correct
month.
Press the /,/ENTER button to confirm this setting. The
date (right) digits will flash.
Press the }/SET+ or {/SET- button to set the correct
date.
Press the /,/ENTER button to confirm this setting.
Before using your clock radio for FM reception, unwrap and
fully extend the aerial wire. You may need to adjust the
position of the aerial wire for maximum signal strength.
Choosing 12 or 24 hour clock time display:
•
At any time you can press the 12/24 hr. button on the
back panel to switch the clock display between 12 or 24
hour time display.
CONNECTING AC MAINS POWER
Before connecting the power, check that the mains voltage
on the rating plate of the AC adaptor is the same as the
voltage in your area.
The clock and alarm displays will toggle between 12 hour (with
AM and PM indicator) and 24 hour modes.
NOTE: changing between 12 and 24 hour display will not
affect the clock or alarm settings.
The date is now set.
•
Plug the DC cord from the AC adaptor into the DC jack on
the back of the unit.
SETTING THE TIME AND DATE USING THE TECHNIKA
iPhone APPLICATION
•
Plug the AC adaptor into the wall socket and switch the
mains power on.
The time, date and alarm settings for your clock radio can also
be set via a Technika application for iPhone or iPod touch.
To set the clock time:
•
Press the TIME button briefly.
The unit is now ready for use.
NOTE:- The AC adaptor may become warm during operation
- this is normal.
Once this application has been installed, you can set time,
date and alarm settings into the application. When you
next dock your iPhone to the clock radio, these settings will
synchronise.
The hours digit will flash.
•
•
Press the }/SET+ or {/SET- button to set the correct
hour.
Press the /,/ENTER button to confirm this setting.
POWER CONTROL
The minutes digits will flash.
For more details of installing and using the Technika
application, refer to the ‘Advanced Operation’ section on
page 13.
STANDBY CONTROL
To turn the radio on:
•
•
Press the }/SET+ or {/SET- button to set the correct
minutes.
Press the /,/ENTER button to confirm this setting.
•
Press the /ALARM RESET button on the top panel.
The unit will switch on and the iPod, FM or AUX function
indicator will light to show the selected audio source.
To set the radio to Standby:
The clock is now set.
To set the date:
•
Press and hold the TIME button.
•
Press the /ALARM RESET button on the top panel.
The year digits will flash.
The unit will set to Standby. All function indicators will switch
off.
•
Press the }/SET+ or {/SET- button to set the correct
year.
•
Press the /,/ENTER button to confirm this setting.
The month (left) digits will flash.
7
SELECTING A SOURCE
LISTENING TO FM RADIO
STATION PRESETS
SOUND SOURCES
To listen to FM radio:
Radio presets
You can choose to listen to the following sources -
•
Press the INPUT button repeatedly to select FM mode.
Your radio can store up to 20 of your favourite stations as
presets for quick recall.
•
•
•
FM radio
iPod (when docked)
Aux source (when connected via the rear panel AUDIO
IN jack).
The ‘FM’ mode indicator will light, the radio will play and the
display will show the tuned frequency.
After a few seconds, the display will revert to show the time
unless you change any FM settings, for example, re-tuning.
To auto-tune to FM stations
To store a station as a preset
•
•
Tune to the station you want to store as a preset.
Press and hold the DISPLAY/MEMORY button.
Selecting a source:
The Preset Store display will appear (P- followed by a flashing
number).
•
Press the INPUT button on the top panel repeatedly to
•
Press and hold the }/SET+ or {/SET- button to
auto-tune up or down the band.
scroll through the available sources.
The symbol for the selected source will light on the display.
•
Press the }/SET+ or {/SET- button if you want to
choose a different preset number to store the station.
To store the preset, press the DISPLAY/MEMORY
button.
The radio will search in the direction indicated and the tuning
frequency will be displayed whilst searching.
When a usable station is detected the radio will stop tuning and
play the station.
•
ADJUSTING THE VOLUME
NOTE: If a preset is not stored within 5 seconds, the radio will
revert to normal operation.
To increase the volume:
To manually tune to FM stations
•
•
Press the VOLUME + button on the top of the unit.
To decrease the volume:
Press the VOLUME - button on the top of the unit.
Press the }/SET+ or {/SET- button briefly to tune
the band manually in 50kHz steps.
To recall any preset 1-20
•
Press the PRESET button repeatedly to step through the
•
STEREO/MONO RECEPTION
preset stations stored.
When the volume is adjusted, the display will change to show
the current volume level setting on a scale of 00 (minimum) to
30 (maximum).
When you stop browsing through the presets, the display will
change briefly to show the station frequency before returning
to display the time.
When receiving a strong, good quality, FM stereo signal your
radio will switch automatically to stereo reception.
The FM stereo symbol will be displayed.
When receiving weaker or FM mono signals, your radio will
switch to mono reception.
The FM stereo symbol will not be displayed.
8
RETRACTABLE DOCK
iPod ADAPTORS
This model features a retractable iPod/iPhone dock that is
built-in to the left side of the unit.
To open the retractable dock:
Before docking your iPod you must first check if your iPod
has a docking connector. Early iPod models do not have one
and cannot be docked to your unit. The docking connector is
located on the base of the iPod as shown below.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor,
or if you have lost the adaptor, you can buy one from Apple
on-line. To determine the exact model of your iPod, refer to
can then browse the iPod accessories page on the Apple
website to find an adaptor for your iPod model that can be
purchased on-line.
•
Press the surface of the retractable dock.
Docking Connector
Before docking your iPod, you must first fit the correct iPod
adaptor to the docking bay. Each iPod adaptor matches the
shape of a particular iPod and is necessary to ensure that
your iPod is securely held when docked.
•
•
The dock will unlock and pop open.
Pull the dock out fully before docking your iPod.
iPod adaptor
Docking bay
Fitting the iPod adaptor
To close the retractable dock::
When your iPod was new it may have been supplied with a
standard dock adaptor in the packaging. If so, fit the adaptor
by pressing it gently into the Docking Bay as shown above.
NOTE: Do not dock an iPod without fitting the correct adaptor,
you may damage the iPod and your unit.
•
•
•
Remove your iPod (if it is docked).
Press the retractable dock gently home.
The catch will click and the retractable dock will lock into
place.
9
DOCKING AN iPod
PLAYING MUSIC FROM AN iPod
iPhone/iPod touch
To dock your iPhone or iPod:
To play a docked iPod:
To play a docked iPhone/iPod touch:
•
•
•
Open the retractable dock as described on the previous
page.
Check that the correct iPod adaptor is fitted to the docking
bay.
Locate the iPod on the Docking Connector and press it
gently home.
•
Press the INPUT button repeatedly to select iPod
function mode.
•
Unlock the iPhone if necessary.
For first time use the message ‘Application Not Installed‘ will be
displayed on the iPhone screen.
The iPod indicator will show on the display.
•
Navigate to the music you want to play using the controls
on the iPod.
The Technika application is
necessary to enable advanced
features of the unit.
For more details of the
advanced features enabled
with the application installed,
refer to the Advanced
Operation’section on page 13.
Once an iPhone is docked and playing, you can operate some
of the functions from the front panel controls.
To remove your iPod from the dock:
•
•
•
Grip the iPod at the sides.
Lift the iPod gently from the dock.
Close the retractable dock.
Playback functions:
•
Press the /,/ENTER button to toggle between Play and
Pause mode at any time.
Press the }/SET+ or {/SET- button to select the next
or previous track on your iPod.
•
CHARGING AN iPod
When an iPod is docked, the iPod will begin to charge
automatically and will continue to charge when the unit is
set to Standby.
•
•
If you want to download the application from iTunes,
touch ‘Yes’and follow the prompts on the iPhone screen.
If you want to download the application later, touch ‘No’
on the iPhone screen.
Playing music:
•
•
Select iPod operation from the iPhone menu.
Navigate to your choice of music.
Once an iPhone is docked and playing, you can operate some
of the functions from the front panel controls.
Playback functions:
•
Press the /,/ENTER button to toggle between Play and
Pause mode at any time.
•
Press the }/SET+ or {/SET- button to select the next
or previous track on your iPod.
10
CONNECTING AUDIO SOURCES TO THE AUDIO IN JACK
The AUDIO IN jack may be used to connect sound sources
with a Line or Headphone analogue output to play through
your unit. These may include -
Playing the AUDIO source
Press the INPUT button repeatedly to select AUX mode.
The AUX symbol will be displayed.
•
•
•
•
•
•
•
iPod models that cannot be docked to the unit
iPod Shuffle
MP3 players
CD walkman players
Tape walkman players
Personal computers or laptops
•
•
Set your personal audio player/computer to PLAY.
Set the listening volume to the level you want with the
volume controls on the radio or remote control.
If there is no sound or if the volume level is not loud enough,
you may need to increase the volume setting on your personal
audio player/computer.
NOTE:- The volume control of the iPod must be turned up
when playing through the AUDIO IN jack.
Connecting to the AUDIO IN jack
Connect stereo 3.5mm jack cable (not supplied)
•
a
NOTE:- An iPod connected to the AUDIO IN jack cannot be
operated from the controls of your clock radio.
between the headphone or LINE/AUX jack of the personal
audio player and the AUDIO IN jack on the back panel.
Headphone jack
To the AUDIO IN jack
11
USING THE ALARMS
Your clock radio has two alarms (Alarm 1 and Alarm 2). You
can set either or both alarms to wake you at your preferred
time and choose to wake up to the sound of radio, music from
an iPod or a buzzer.
Checking the alarm time:
IMPORTANT NOTES:
•
Press the DISPLAY/MEMORY button repeatedly to
•
•
•
Remember to set the unit to Standby before going to
bed.
If you have chosen FM radio as wake-up mode, remember
to tune to a station.
If you have chosen iPod as wake-up mode, remember
to dock your iPod and set the volume to a level that will
wake you before going to bed. If you forget to dock your
iPod and the alarm is set, the unit will automatically
wake you with a buzzer.
change the display in the sequence -
•
•
•
Alarm 1 time check.
The Alarm 1 indicator will light and the Alarm 1 time
setting will be displayed.
Alarm 2 time check.
The Alarm 2 indicator will light and the Alarm 2 time
setting will be displayed.
Setting the Alarm 1 alarm time:
•
Press and hold the ALARM button.
The Alarm 1 indicator will light and the hours digit will flash.
1. Press the }/SET+ or {/SET- button to set the correct
alarm hour.
2. Press the /,/ENTER button to confirm this setting.
The minutes digits will flash.
Return to time/date display.
NOTE: The time check displays will cancel after 5 seconds.
WHEN THE ALARM WAKES YOU
3. Press the }/SET+ or {/SET- button to set the correct
alarm minutes.
Setting the alarm to wake you:
The alarm will sound at your preset time and the Alarm Mode
display will flash. The volume will gradually increase in level.
You can then choose to set snooze, which will temporarily
reset the alarm for a further 10 minutes, or to switch it off.
•
Press the ALARM button repeatedly to set Alarm 1, Alarm
2 or both alarms to wake you as required or to .
Press the MEM/ALARM button repeatedly to scroll
through the wake-up options on the display -
4. Press the /,/ENTER button to confirm this setting.
The current alarm wake-up mode will flash.
5. Press the }/SET+ or {/SET- button to select the
wake-up mode you want from the options of - FM, iPod
or Buzzer.
•
To set snooze:
•
To set snooze, press the SNOOZE/DIMMER button when
the alarm sounds.
The alarm will stop sounding and the alarm indicator will flash.
After 10 minutes, the alarm will sound again.
6. Press the /,/ENTER button to confirm this setting.
Alarm 1 time is now set.
Setting the Alarm 2 alarm time:
To switch off the alarm:
•
Press and hold the ALARM button.
The Alarm 1 indicator will light and the hours digit will flash.
Press the ALARM button briefly.
The Alarm 2 indicator will light and the hours digit will flash.
•
To switch off the alarm, press the ALARM RESET
button.
The unit will set to Standby.
•
The indicators shown next to each option will light on the
display to confirm the mode that is set.
ALARM REPEAT
The alarm(s) will sound at the same time each day when
set.
•
Follow steps 1 - 6 above to set the Alarm 2 hour, minute
and Alarm mode.
12
ADVANCED OPERATION
The advanced features are enabled when an iPhone or iPod
touch with Technika application running is docked to the unit
(iPhone in this section also applies to iPod touch).
Advanced features -
USING THE APPLICATION
Running the application:
NOTE: The iPhone does not have to be docked to run the
application.
Choosing an application function:
•
Touch one of the icons located at the bottom of the
screen to select the function you want.
Application help
•
•
•
•
Weather and temperature display
•
•
Find the ‘Technika’application icon on your iPhone.
Touch the application to start it.
Automatic clock setting via the iPhone application
Alarm setting via the iPhone application
Radio operation via the iPhone application
NOTE: Advanced features will only be available when the
iPhone is docked with the application running.
Installing the application:
The Technika application must be installed on the iPhone to
enable the advanced features.
Setting the Clock, Date and your home location for
Weather:
•
Dock your iPhone with the application running.
•
Press the INPUT button repeatedly to select iPod
function mode.
When you dock your iPhone for the first time you will see the
message - ‘Would you like to use your current location’.
•
•
Dock the iPhone.
Unlock the iPhone if necessary.
•
Touch ‘OK’to retireve your current location.
Once this has been set, the time, date, weather and temperature
displays of your clock radio will synchronise with the latest
information available from the iPhone.
If the application has not been installed, the message
‘Application Not Installed‘ will be displayed on the iPhone
screen.
Clock function
Application settings
Weather function Radio function
Application help:
If you need help with using the application, touch the help
icon at the top of the screen.
There are several help screens available, scroll to reveal them.
Touch the icon to exit the help screens.
TIP: Remember that the Technika application will run on
your iPhone when it is not docked to display time, date and
weather information.
•
Touch ‘Yes’ and follow the prompts on the iPhone screen
to download the application from iTunes and install it.
13
ADVANCED OPERATION
CLOCK FUNCTION:
Setting the alarms via the application:
•
•
When the time is set, press the ‘DONE’ icon to return to
the main alarm setting screen.
When you have finished changing all alarm settings,
press the ‘DONE’icon to return to the clock screen.
If the application is running on an iPhone that is docked, the
time, date and weather settings of your clock radio will be
automatically updated.
NOTE:When an iPhone is docked and theTechnika application
is running, alarm settings made in the application will over-
ride alarm settings made on your clock radio.
With the clock function selected, you can also choose to set
either or both of the alarms.
Setting the alarms via the application:
NOTE: When the iPhone is docked and the alarms are set
through the application, the wake-up mode will always be
the music you selected from the iPhone.
To set alarm times and wake-up music:
•
From the clock display screen, touch the alarm setting
icon to open the alarm setting screen.
•
Touch the Clock icon to open the clock screen.
WEATHER FUNCTION:
•
Touch the Weather icon to launch the weather
application.
1. Done icon, touch to exit alarm setting
2. Alarm 1 setting area
3. Alarm 2 setting area
1. Alarm setting icon
2. Time and date displays
3. Alarm time displays
•
•
From this screen you can switch each alarm on or off,
set the wake-up volume and choose to activate snooze
mode.
Touch the set time banner to open a sub-screen that
enables you to set the alarm time and day(s) and to
select wake-up music from your iPhone.
1. More detail of the current weather
2. Weather forecast
4. Location and weather summary
From the weather screen you can choose sub-screens that
display detailed information of the current weather condition
or a weather forecast.
From the detail sub-screens, touch the‘< Back’icon to return
to the main weather display screen.
14
ADVANCED OPERATION
RADIO FUNCTION:
Auto tuning/preset storing:
APPLICATION SETTINGS:
Select the Radio function from the application menu at the
bottom of the screen.
•
Touch the AUTO icon to scan for stations and store any
stations found in the application preset locations.
From the Application setting screen you can choose the
following settings -
The radio screen will be displayed.
NOTE: The presets stored by the application are separate and
additional to those stored from the control panel.
Flash colon: Set to ‘ON’ for a flashing colon on the clock
display.
Manual tuning:
Brightness: Set the display brightness for the application
•
Scroll the frequency wheel to manually tune a station.
The upper half of the wheel sets tuning in 1MHz steps,
the lower half in 0.1MHz steps.
For example, to tune 105.5MHz, set the upper wheel to
105, the lower wheel to 5.
(useful to make the display dimmer when docked at night).
24 Hour Mode: Set the clock mode to your preference of 24
hour or 12 hour display.
Temperature unit: Choose to set the temperature display
units to your preference of Centigrade or Fahrenheit.
Both the iPhone display and the clock radio display will tune.
Auto-Lock: When set to ‘ON’ with the application running
Storing a station as a preset:
the iPhone will lock automatically after
1
minute of
NOTE: If you know the station frequencies of your favourite
stations, you can enter the frequencies into the application
and store them as presets before docking your iPhone.
•
•
•
inactivity. When set to ‘OFF’ the iPhone will not lock while
the application is running.
1. Scroll here to tune the radio (108.0 MHz
shown in this example)
2. Touch here to store a station preset
3. Touch here to scan for a station
4. Scroll here to change the radio volume
5. Touch to select a radio preset
NOTE: When Auto-Lock is set to ‘OFF’ the iPhone display will
stay permanently lit when the application is running.
Tune to the station you want to store.
Touch the SAVE icon.
Choose a preset number to store this station (touch the
M1, M2.... etc icon).
Sure Alarm: If Sure Alarm is enabled, the alarms will still
operate if Auto-Lock has locked the iPhone.
NOTE: Setting Sure Alarm ‘On’ is recommended if you plan to
use the alarm functions in the Technika application.
The station will be stored.
NOTE: You can scroll the preset bar to reveal more preset
numbers (up to 20) if required.
You can now operate many functions of your clock radio from
the iPhone screen, tuning for stations and storing presets.
In addition, you can assign the presets names for easier
selection.
Naming preset stations:
You can name preset stations stored on your iPhone.
•
Touch the text box below the preset number you want
to rename.
The text entry keypad will appear.
Enter the preset name.
•
15
SLEEP FUNCTION
CARE AND MAINTENANCE
WARRANTY&SPECIFICATIONS
SLEEP TIMER
CARE AND CLEANING
SPECIFICATIONS
You can set the Sleep timer to play music for a set period
while you are falling asleep.
To set the sleep timer:
All care and cleaning operations should be carried out with
the unit unplugged from the mains power.
The surface of the unit can be cleaned with a barely damp
cloth and then dried carefully. Never use abrasives, abrasive
cloths or chemical solvents .
Supply Voltage: ............... 5V , 1.2A
AC Adaptor input:............ 100-240V ~, 50/60Hz, 0.2A
AC Adaptor output: ......... 5V , 1.2A
Frequency range: ............ 76-108MHz
Net Weight:..................... kg
•
•
Play your choice of music.
Press the SNOOZE/SLEEP button repeatedly to cycle
through the sleep time options from 10 minutes to 90
minutes in 10 minute intervals. Pressing once more
beyond the 90 minute setting will cancel Sleep mode.
UK: Waste electrical products/batteries should
not be disposed of with household waste.
Separate disposal facilities exist, for your near-
in-store for details.
ROI: Produced after 13th August 2005. Waste
electrical products/batteries should not be dis-
posed of with household waste. Please recycle
where facilities exist. Check with your Local Au-
thority or retailer for recycling advice.
TROUBLESHOOTING
Poor quality radio reception
The aerial signal may not be adequate. Try repositioning the
aerial wire (FM) or loop aerial (AM).
When Sleep mode is set the Sleep indicator will be displayed
and the music will continue to play for the time you selected.
The unit will then set to Standby.
Alarm not sounding
Check that you have set the correct alarm time, and set
the alarm to wake you (wake-up mode symbol(s) will be
displayed). Check also that the unit is set to Standby before
you go to bed.
If you have docked an iPhone with the application running,
check that the application settings are correctly made in the
application.
No sound/low volume from AUDIO IN source:
Check that the volume control is turned up on the AUX
source.
WARRANTY
Sleep indicator
Your Tesco appliance is covered by a warranty for 12 months
from the date of purchase. If a fault develops during this
period, please contact the TESCO electrical help line on 0845
456 6767. Please have your original purchase receipt with
you when you call. This warranty in no way affects your con-
sumer rights.
Checking the sleep time remaining:
•
If you want to check the sleep time remaining during the
No display:
sleep period, press the SLEEP button.
The display dimmer may have been set to low (no backlight).
Press the SNOOZE/DIMMER button to restore the backlight.
Cancelling sleep mode:
To cancel Sleep mode, set the unit to Standby.
•
16
Te sco Stores Ltd,
Delamare Road, Cheshunt, Herts, EN8 9SL
CR113IPH V0
Technika Helpline: 0845 456 6767 (Calls cost up to 4p per minute from a BT landline, other providers may vary)
|