CD-160
Technical Documentation
PRODUCT OVERVIEW
TASCAM's CD-160 is a cost-effective, rack mountable
CD player. The Auto Cue function will set the CD-160
at the "first audio" in a track, offering faster start
time on tracks with longer lead-ins. Pitch control is
standard, allowing minor tuning adjustment or a
bump in the feel of the track. Also, a +10 track
increment saves time when trying to locate high
track numbers. The CD-160 comes with a wireless
remote.
• 2-U Rack Mountable CD Player
• Fast Track Access Keypad
• Auto Cue Function Locates Track's "First Audio"
• Unbalanced RCA Analog Output
• Digital Coaxial Output
• ± 6% Pitch Control with Clear On/Off Switch
• Headphone Jack with Level Control
• Program Play and Shuffle Play Modes
APPLICATIONS
SPECIFICATIONS
Performance Specifications:
Audio Channels:
Quantization
Sampling Frequency:
Oversampling:
Auto Cue Level:
The CD-160 CD player is a simple, cost effective CD player
capable of handling most installations, and offering advanced
features like pitch control and auto cue.
2 channel stereo
16 bit linear
44.1kHz
8x
-60dB
Mobile PA Systems (Schools, Small Bands, etc.)
Analog Output:
Unbalanced RCA
-10dBv, 10kOhms
+6dBv, 2Vrms
2.5kOhms
SPDIF Coaxial
11mW at max
(32 Ohm Load Impedance)
± 6% (in 1% steps)
20Hz-20kHz ± 1.5db
<0.02%
School systems often need to move between several locations
in the school for various functions - the pep rally in the gym,
the talent show in the theater, the staff meeting in the teacher's
lounge, etc. These systems simply need a rack mounted CD
player for portability, and will need to be durable enough to
withstand the travel. Full production CD players are not
required in these situations.
Nominal Output Level:
Maximum Output Level:
Output Impedance:
Digital Output:
Headphone Output:
Pitch Control:
Frequency Response:
Total Harmonic Distortion:
Signal to Noise Ratio:
Channel Separation:
>85dB (1kHz)
>80dB (1kHz)
Bands face a similar problem when trying to have CDs playing
between sets, or even during set-up and tear down. Again,
the fancy feature set is not required. All that is needed is the
durable reliability that TASCAM is known for.
General:
Standard Equipment:
RC-150C
(Wireless Remote)
120VAC, 60Hz
(US/Canada Model)
230VAC, 50Hz
(Europe Model)
240VAC, 50Hz
(Australia Model)
9W
Power Requirements:
The CD-160 offers a cost effective solution to these markets
without dropping in all sorts of extra features that might cause
the user to make a mistake. It's all about pure and simple
reliability.
Power Consumption:
Dimensions:
Fixed Installations (Lecture Halls, Board Rooms, etc.)
482 x 104 x 304 mm
19" x 4.1" x 11.9"
4.4Kg, 9.7 lbs
Whether you're setting up a player for a board room, lecture
halls, dance studios, or small theaters, often what is required
is a simple playback device. Extra features will often go
unused in these environments, and the CD-160 offers a
familiar player to these users.
Weight:
The CD-160 is available at:
In the case of dance or music instructional facilities, the pitch
control may come in handy for changing the feel of a track, or
taking it to a different key. Plus, the keypad allows faster
track access which comes in handy when dealing with sound
cues or multiple backing tracks.
7733 Telegraph Road
•
Montebello, CA 90640
•
(323) 726-0303
•
Page 1 of 2
CD-160_TECHDOC.pdf
092602
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
|