Quick Installation Guide
TEW-444UB
1. Antes de iniciar
Contenidos del paquete
TEW-444UB
CD-ROM del controlador y la
herramienta
Guía de instalación rápida
Cable de extensión USB 2.0
Requisitos del sistema
Una unidad de CD-ROM
PC con un puerto USB 1.1 ó 2.0 disponible
CPU: 300 MHz o superior
Memoria: 32MB o más
Windows 98SE/ME/2000/XP/2003 Server
Aplicación
Workstation with 108Mbps
Wireless USB 2.0 Adapter
(TEW-444UB)
Workstation with
108Mbps 802.11g
Wireless PCI Adapter
(TEW-443PI)
108Mbps Wireless
Access Point
(TEW-450APB)
Internet
Notebook with 108Mbps
802.11g Wireless PC Card
(TEW-441PC)
Cable/DSL 4-Port
Firewall Router
(TW100-BRF114)
Cable/DSL
Modem
1
2. Cómo se instala
¡Importante! NO conecte el adaptador USB inalámbrico a su PC a menos que
se le indique.
1. Introduzca el CD-ROM del
controlador y de la herramienta
en la unidad de CD-ROM de su PC
y luego haga clic en Install Utility
(Instalar herramienta).
2. Siga las instrucciones del
InstallShield Wizard (asistente de
InstallShield) y luego haga clic en
Finish (Finalizar).
2
Nota: El TEW-444UB es hot pluggable, puede conectarse o desconectarse con
el PC encendido.
3. Conecte el adaptador USB
inalámbrico TEW-444UB al puerto
USB de su PC.
Nota: Windows 2003 Server/XP/2000/ME/98SE detectará e instalará de
manera automática los controladores apropiados. Pase a la sección 3 para
Windows 2003 Server/XP/2000/ME. Para Windows 98SE, por favor introduzca
su CD-ROM de Windows 98SE y siga con el paso 4.
4. Haga clic en OK.
La instalación ha sido completada
3
3. Configuración inalámbrica
Nota: Una configuración inalámbrica requiere un Punto de Acceso 802.11g ó
802.11b (para Modo de Infraestructura) u otro adaptador inalámbrico 802.11g
(para un modo de red Ad-Hoc o de Usuario a Usuario).
1. Haga doble clic en el icono
Wireless (Inalámbrico).
2. Haga clic en Profile Management
(Gestión de perfil), y luego pulse
Scan (escanear).
3. Haga clic en el SSID apropiado, y
después pulse Activate (Activar)
4
4. Escriba un Profile Name (Nombre
de perfil), y después pulse OK.
5. Compruebe que hay potencia de
señal. La configuración ha
finalizado.
La configuración inalámbrica ha finalizado
Para obtener información más detallada sobre la configuración así como de las
configuraciones avanzadas del TEW-444UB , por favor consulte la sección de
resolución de problemas, el CD-ROM de la Guía del Usuario, o el sitio Web de
5
Troubleshooting
Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation
menu does not appear automatically. What should I do?
A1: If the installation menu does not appear automatically, click Start, click Run, and type
D:\setup.exe where "D" in "D:\setup.exe" is the letter assigned to your computer's CD-
ROM Drive. And then click OK to start the installation.
Q2: When I open up the utility, all the buttons are greyed out.
A2: Verify that the device is installed properly. Right click on My Computer -> Properties. Click
on Hardware, then Device Manager. Double click on Network Adapters. Make sure that
802.11g Wireless Network Adapter is listed and there is no yellow question mark or exclamation
point. Also perform a reboot on the computer.
Q3: When I click on Scan, I can not see my SSID.
A3: Log on to your wireless router or access point and make sure that the SSID broadcast option is
not disabled. Make sure the wireless light on your wireless router or access point is on.
Q4: I completed all the steps in the Quick Installation Guide, but my Wireless USB Adapter isn't
connecting to my access point. What should I do?
A4: First, verify that the Network Name (SSID) matches your wireless router or wireless access
point’s SSID. Second, check your TCP/IP properties to ensure that Obtain an IP address
automatically is selected. Third, click Profile Management -> Scan in the Wireless Client Utility to
check and see if there are any available wireless networks listed. Third, click Profile Management
-> Scan in the Wireless Client Utility to check and see if there are any available wireless networks
listed.
Q5: The utility program shows good signal strength, but I can not get onto the Internet.
A5: First, log on to your wireless router or access point and check to see if encryption is enable. If
encryption is enabled, go to Profile Management -> Modify -> Security. Select the proper
Security Options, click on configure, then put in the proper encryption key. Then click Ok.
Second, make sure to disable any firewall programs. Third, make sure that your router is properly
configured for Internet.
If you still encounter problems or have any questions regarding the TEW-444UB, please refer to the
User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support Departmen
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired
operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
6
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
3135 Kashiwa Street
Torrance, CA 90505
USA
Copyright ©2006. All Rights Reserved. TRENDnet.
|